Bulletin I2184 11/04 SAFEIR Series 70TPS..PbF PHASE CONTROL SCR VT Lead-Free ("PbF" suffix) < 1.4V @ 100A ITSM = 1400A VRRM = 1200 e 1600V Description/ Features The 70TPS..PbF SAFEIR series of silicon controlled rectifiers are specifically designed for high and medium power switching and phase control applications. Typical applications are in input rectification (soft start) or AC-Switches or high current crow-bar as well as others phase-control circuits. These products are designed to be used with International Rectifier input diodes, switches and output rectifiers which are available in identical package outlines. Major Ratings and Characteristics Characteristics IT(AV) Sinusoidal Package Outline Values Units 70 A waveform IRMS (*) 75 A VRRM/ VDRM Range 1200 e 1600 V 1400 A 1.4 V dv/dt 500 V/s di/dt 150 A/s - 40 to 125 C ITSM VT @ 100 A, TJ = 25C TJ Super-247 (*) Lead current limitation www.irf.com 1 70TPS..PbF SAFEIR Series Bulletin I2184 11/04 Voltage Ratings VRRM/ VDRM, max. repetitive peak and off-state voltage VRSM , maximum non repetitive peak reverse voltage IRRM/ IDRM 125C V V mA 70TPS12PbF 1200 1300 15 70TPS16PbF 1600 1700 Part Number Absolute Maximum Ratings Parameters IT(AV) Max. Average On-state Current IT(RMS) Max. Continuous RMS 70TPS.. Units 70 A 75 Conditions @ TC = 82 C, 180 conduction half sine wave Lead current limitation On-state Current As AC switch ITSM I2t Max. Peak One Cycle Non-Repetitive 1200 Surge Current 1400 Max. I 2t for Fusing 7200 A A2s 10200 2 I t 2 Max. I t for Fusing VT(TO)1 Low Level Value of Threshold 10ms Sine pulse, rated VRRM applied Initial 10ms Sine pulse, no voltage reapplied TJ = TJ max. 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied 102000 2 A s t = 0.1 to 10ms, no voltage reapplied 0.916 V TJ = 125C Voltage VT(TO)2 High Level Value of Threshold 1.21 Voltage rt1 Low Level Value of On-state 4.138 m Slope Resistance rt2 High Level Value of On-state 3.43 Slope Resistance VTM Max. Peak On-state Voltage 1.4 V di/dt Max. Rate of Rise of Turned-on Current 150 A/s TJ = 25C IH Max. Holding Current 200 mA TJ = 25C IL Max. Latching Current 400 IRRM / Max. Reverse and Direct 1.0 IDRM Leakage Current 15 dv/dt Max. Rate of Rise 500 2 mA @ 100A, TJ = 25C TJ = 25C TJ = 125C V/s VR = rated V RRM/ VDRM TJ = 125C www.irf.com 70TPS..PbF SAFEIR Series Bulletin I2184 11/04 Triggering Parameters Conditions 70TPS.. Units PGM Max. peak Gate Power 10 W PG(AV) Max. average Gate Power 2.5 IGM 2.5 A - V GM Max. peak negative Gate Voltage 10 V VGT Max. required DC Gate Voltage 4.0 TJ = - 40C Anode supply = 6V to trigger 1.5 TJ = 25C resistive load 1.1 TJ = 125C IGT Max. peak Gate Current t = 30s Max. required DC Gate Current 270 mA to trigger 100 V GD Max. DC Gate Voltage not to trigger 0.25 V IGD Max. DC Gate Current not to trigger 6 mA TJ = - 40C TJ = 25C 80 TJ = 125C TJ = 125C, V DRM = rated value Thermal-Mechanical Specifications Parameters 70TPS.. Units TJ Max. Junction Temperature Range - 40 to 125 C Tstg Max. Storage Temperature Range - 40 to 150 RthJC Max. Thermal Resistance Junction 0.27 C/W Conditions DC operation to Case RthJA Max. Thermal Resistance Junction 40 to Ambient RthCS Max. Thermal Resistance Case 0.2 Mounting surface, smooth and greased to Heatsink wt Approximate Weight T Mounting Torque 6 (0.21) g (oz.) Min. 6 (5) Kg-cm Max. 12 (10) (lbf-in) Case Style Super-247 Marking Device 70TPS16 R Conduction (per Junction) (The following table shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC) Device 70TPS Sine half wave conduction Rect. wave conduction 180 o 120 o 90o 60o 30o 180o 120o 90o 60o 30o 0.078 0.092 0.117 0.172 0.302 0.053 0.092 0.125 0.180 0.306 www.irf.com Units C/W 3 70TPS..PbF SAFEIR Series 130 70TPS.. Series RthJC (DC) = 0.27 C/W 120 110 Conduction Angle 30 100 60 90 90 120 180 80 70 0 10 20 30 40 50 60 70 80 Maximum Allowable Case temperature (C) Maximum Allowable Case temperature (C) Bulletin I2184 11/04 130 70TPS.. Series RthJC (DC) = 0.27 C/W 120 DC 110 Conduction Period 100 180 90 80 30 120 100 80 RMS Limit 60 40 Conduction Angle 20 70TPS.. Series Tj = 125C 0 0 10 20 30 40 50 60 70 0 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 125C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 1200 1100 1000 900 800 700 600 70TPS.. Series 500 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current 4 10 20 30 40 50 60 70 80 90 150 180 120 90 60 30 120 90 DC RMS Limit 60 Conduction Period 30 70TPS.. Series Tj = 125C 0 0 15 30 45 60 75 Average On-state Current (A) Fig. 4 - On-state Power Loss Characteristics Peak Half Sine Wave On-state Current (A) Peak Half Sine Wave On-state Current (A) Average On-state Current (A) Fig. 3 - On-state Power Loss Characteristics 1300 120 Average On-state Current (A) Fig. 2 - Current Rating Characteristics Maximum Average On-state Power Loss (W) Maximum Average On-state Power Loss (W) 180 120 90 60 30 90 60 Average On-state Current (A) Fig. 1 - Current Rating Characteristics 140 60 70 1500 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. 1300 Initial Tj = 125C No Voltage Reapplied 1200 Rated Vrrm Reapplied 1400 1100 1000 900 800 700 600 70TPS.. Series 500 0.01 0.1 1 Pulse Train Duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current www.irf.com 70TPS..PbF SAFEIR Series Bulletin I2184 11/04 Instantaneous On-state Current (A) 1000 Tj = 125C 100 10 Tj = 25C 70TPS.. Series 1 0.5 1 1.5 2 2.5 3 3.5 Instantaneous On-state Voltage (A) Fig. 7 - On-state Voltage Drop Characteristics 10 Rectangular gate pulse a)Recommended load line for rated di/dt: 20 V, 30 ohms tr = 0.5 s, tp >= 6 s b)Recommended load line for <= 30% rated di/dt: 20 V, 65 ohms tr = 1 s, tp >= 6 s (a) IGD TJ = 25 C VGD TJ = -40 C 1 0.1 0.001 Transient Thermal Impedance Z thJC (C/W) (1) PGM = 100 W, tp = 500 s (2) PGM = 50 W, tp = 1 ms (3) PGM = 20 W, tp = 25 ms (4) PGM = 10 W, tp = 5 ms (b) TJ = 125 C Instantaneous Gate Voltage (V) 100 70TPS.. Series 0.01 (4) (3) (2) (1) Frequency Limited by PG(AV) 0.1 1 10 Instantaneous Gate Current (A) Fig. 8 - GateCharacteristics 100 1000 1 Steady State Value (DC Operation) 0.1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 Single Pulse 70TPS.. Series 0.01 0.0001 0.001 0.01 0.1 Square Wave Pulse Duration (s) 1 10 Fig. 9 - Thermal Impedance ZthJC Characteristics www.irf.com 5 70TPS..PbF SAFEIR Series Bulletin I2184 11/04 Outline Table 0.13 [.005] 16.10 [.632] 15.10 [.595] 2X R 5.50 [.216] 4.50 [.178] A 0.25 [.010] B A 13.90 [.547] 13.30 [.524] 2.15 [.084] 1.45 [.058] 1.30 [.051] 0.70 [.028] 4 20.80 [.818] 19.80 [.780] 16.10 [.633] 15.50 [.611] 4 C 1 2 3 B 14.80 [.582] 13.80 [.544] 5.45 [.215] 2X O 1.60 [.063] MAX. 4.25 [.167] 3.85 [.152] 3X 3X 0.25 [.010] B A E E 1.30 [.051] 1.10 [.044] 2.35 [.092] 1.65 [.065] SECTION E-E NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-1994. 2. DIMENSIONS ARE SHOWN IN MILLIMETERS [INCHES] 3. CONTROLLING DIMENSION: MILLIMETER 4. OUTLINE CONFORMS TO JEDEC OUTLINE TO-274AA LEAD ASSIGNMENTS MOSFET 1 - GATE 2 - DRAIN 3 - SOURCE 4 - DRAIN IGBT 1 - GATE 2 - COLLECTOR 3 - EMITTER 4 - COLLECTOR Dimensions in millimeters and inches Marking Information EXAMPLE: THIS IS A 70TPS16 INTERNATIONAL WITH ASSEMBLY RECTIFIER LOT CODE 5657 LOGO ASSEMBLED ON WW 35, 2000 IN ASSEMBLY LINE "H" ASSEMBLY LOT CODE 6 PART NUMBER 70TPS16 P035H 56 57 DATE CODE P = LEAD-FREE YEAR 0 = 2000 WEEK 35 LINE H www.irf.com 70TPS..PbF SAFEIR Series Bulletin I2184 11/04 Ordering Information Table Device Code 70 T P S 1 2 3 4 16 PbF 5 1 - Current Rating (70 = 70A) 2 - Circuit Configuration: 2 (A) 6 T = Thyristor 1 (K) (G) 3 3 - Package: 4 - S = Standard Recovery Rectifier 12 = 1200V 5 - Voltage code: Code x 100 = V RRM 16 = 1600V 6 - y none = Standard Production y PbF = Lead-Free P = Super-247 Type of Silicon: Data and specifications subject to change without notice. This product has been designed for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 11/04 www.irf.com 7