1
Fuseholders FEC
https://www.schurter.com /PG02
Fuses
Shock-Safe Fuseholder, 5 x 20 / 6.3 x 32 mm, Slotted Cap/Fingergrip, IEC: 500 VAC, UL/CSA: 600 VAC/DC
Socket with Slotted Cap
Caps must be ordered separately (see
accessories)
Socket with Fingergrip Cap
See below:
Approvals and Compliances
500 VAC · 4/ 3.2 W / 10 A (VDE) · 600 VAC/DC · 20 A (UL/CSA)
Description
- Fuseholder for 500 VAC applications
- Cap is available slotted or with fingergrip
- 5x20: 3.2W / 6.3x32: 4W
Applications
- Equipment with three-phase supply (400 VAC)
Weblinks
pdf datasheet, html-datasheet, General Product Information, Packaging
details, Distributor-Stock-Check, Accessories, Detailed request for
product, Microsite
Technical Data
Shock-Safe Category PC2
Fuse-Link 5 x 20 or 6.3 x 32 mm
Mounting Panel Mount, Front Side
Attachment Fixing Nut
Terminal Solder or Quick-Connect 6.3 x 0.8 mm
Rated Voltage 500 VAC (VDE), 600 VAC/DC (UL/CSA)
Rated current 10 A (VDE), 20 A (UL/CSA)
Rated Power Acceptance IEC 4/ 3.2 W / 10 A @ Ta 23 °C
Admissible power acceptance at higher
ambient temperature see derating cur-
ves
Degree of Protection IP 40
Protection Class Suitable for appliances with protection
class I acc. to IEC 61140
Admissible Ambient Air Temp. -40 °C to 85 °C
Climatic Category 40/085/21 acc. to IEC 60068-1
Material: Socket Thermoset, black, UL 94V-0
Material: Terminals Tin-Plated Copper Alloy
Unit Weight 9 g / 5.36 g
Storage Conditions 0 °C to 60 °C, max. 70% r.h.
Product Marking , Type, Rated Voltage, Power Rating,
Rated current, Approvals
Soldering Methods Iron
Soldering Profile
Solderability 350 °C / 2 sec acc. to IEC 60068-2-20,
Test Ta, method 2
Resistance to Soldering Heat 350 °C / 10 sec acc. to IEC 60068-2-20,
Test Tb, method 2
Contact Resistance ≤ 10 mΩ at 20 mV acc. to IEC 60127-6
Dielectric Strength > 3 kV
> 4 kV between life parts
(50 Hz: 1 min)
Impulse Withstand Voltage > 4 kV between life parts
> 6 kV between life parts
Insulation Resistance > 10 MΩ between life parts
> 100 MΩ between life parts
(500 VDC: 1 min)
Overvoltage Category II acc. to IEC 60664-1
Pollution Degree 2 acc. to IEC 60664-1
Admissible Torque on Fixing
Nut
max 1.2 Nm
Panel Thickness max 9 mm
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: FEC
Approval Logo Certificates Certification Body Description
VDE Approvals VDE VDE Certificate Number:
UL Approvals UL UL File Number: E39328
2
Fuseholders
FEC https://www.schurter.com /PG02
Fuses
Product standards
Product standards that are referenced
Organization Design Standard Description
Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links
Designed according to UL 4248-1 Fuseholder general requirements
Designed according to CSA C22.2 no. 4248.1 Fuseholder general requirements
Application standards
Application standards where the product can be used
Organization Design Standard Description
Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information
technologyequipment.
Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets
the requirements for appliances in unattended use. This includes the en-
hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13.
Compliances
The product complies with following Guide Lines
Identification Details Initiator Description
CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
RoHS SCHURTER AG EU Directive RoHS 2011/65/EU
China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
White paperGlow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use.
This includes the enhanced requirements of glow wire tests acc. to IEC
60695-2-12 and -13.
Dimension [mm] 56.5 mm
56.5
8
M16x2/2
445
SW19
21.9
1.8
ø 19
6.3x0.8
max. 9
Variant with slotted cap 0031.1631 + 0031.1611/1613
56.5
21.9
M16x2/2
445
SW19
ø 19
6.3x0.8
max. 9
Variant Fingergrip 0031.1631 + 0031.1616
0
-0.3 15 +0.15
0
16 +0.15
0
16.5
Mounting holes
3
Fuseholders FEC
https://www.schurter.com /PG02
Fuses
Derating Curves
Admissible Power Acceptance in Watt
020406080 100
0.5
0.0
I = << In
I = 0.7 In
I = 1.0 In
4.0
1.5
1.0
2.0
3.0
2.5
3.5
Ambient Air Temperature Ta °C
All Variants
Holder Cap Fuse-Link Terminal Degree of Pro-
tection
Remark Order Number
l- 5 x 20 or 6.3 x 32mm Solder IP 40 - 0031.1631 █
l- 5 x 20 or 6.3 x 32mm Quick-Connect 6.3 x 0.8 mm IP 40 - 0031.1623 █
lslotted 6.3 x 32mm Quick-Connect 6.3 x 0.8 mm IP 40 0031.1623 + 0031.1613 0031.1622
lFingergrip 6.3 x 32mm Quick-Connect 6.3 x 0.8 mm IP 40 0031.1623 + 0031.1616 0031.1624
lslotted 5 x 20mm Quick-Connect 6.3 x 0.8 mm IP 40 0031.1623 + 0031.1611 0031.1621
lslotted 5 x 20mm Solder IP 40 0031.1631 + 0031.1611 0031.1632
lslotted 6.3 x 32mm Solder IP 40 0031.1631 + 0031.1613 0031.1633
lFingergrip 6.3 x 32mm Solder IP 40 0031.1631 + 0031.1616 0031.1634
█ Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
Packaging Unit Bulk (50 pcs.)
Required Accessory
Description
Caps to FEC
Caps to Holder FEC
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
09.04.2018
