FEATURES
■ Standard part frequency range (80MHz – 2.0GHz)
■Low passband ripple
■Linear phase
■High selectivity
APPLICATIONS
■ Cellular Phone: E-AMPS, PCS and GSM, PDC
■Cordless Phone: CT-1, ISM, DECT
■Land Mobile Radio (LMR)
■915 MHz ISM
■Pager
■RKE
■GPS
SAF C 860.5M A* 7* 0* N – TC
Designates C – Surface Mount Center Alpha Numeric Numeric Substrate: 180mm dia reels:
Saw Filters Multi-Layered Ceramic Frequency Character for Package Performance T – Lithium TC = 500/Reel
U – Surface Mount in MHz Design Style Code Tantalate TC11 = 1,000/Reel
Single Layer Ceramic Characteristics Code N – Lithium TC12 = 2,000/Reel
Niobate 330mm dia reels:
X – Crystal TC00 = 10,000/Reel
S – Sapphire TC05 = 5,000/Reel
TC04 = 4,000/Reel
TC02 = 2,000/Reel
*Consult Microwave Group for details by part number.
PART NUMBERING SYSTEM
TYPICAL CELLULAR SYSTEM
AND SAW POSSIBILITIES
SAW Rx
FILTER
SAW LOCAL
FILTER
SAW
IF
FILTER
SAW Tx
FILTER
MIXER
MIXER
LNA
ANT
DUPLEXER
P.A.
AF
IF
TCXO
P.S. PLL
LPF
VCO
90MHz
PLL
ATTENUATION VS. FREQUENCY – GENERAL
COMPARISON OF FILTER CHARACTERISTICS
Attenuation
Frequency
SAW LC
Dielectric
CERAMIC MICROWAVE FILTERS
SAW FILTERS
350 CG01-I
SAF Series
Center I.L. Bandwidth Attenuation
Ripple
Max. Input/Output Pkg. Tape
App. Part Number Function Freq. (dB) (MHz) (dB) (dB) VSWR GDT Impedance Style Code‡
(MHz) max.* max. (s)
824 to 849 3.8 TC00,
SAFC836.5MC90T RF (TX) 836.5 3.8 869 to 894 25 1.8 2 N/S 50 ohm // 0pF SC33 TC05,
920 to 2000 32 TC11,TC12
869 to 894 3.5 TC00,
SAFC881.5MC90T RF (RX) 881.5 3.5 824 to 849 30 1.5 2.0 — 50 ohm // 0pF SC33 TC05,
1100 to 2000 32 TC11,TC12
869 to 894 2.5 TC00,
SAFC881.5MD90T RF (RX) 881.5 2.5 824 to 849 20 1.5 2.5 —50 ohm // 0pF SC33 TC05,
1100 to 2000 2.3 TC11,TC12
869 to 894 3.5 TC00,
E-AMPS
SAFC881.5MWC90T RF (RX) 881.5 3.5 824 to 849 30 1.5 2.0 —50 ohm // 0pF SC33 TC05,
/ADC differential
1100 to 2000 28 TC11,TC12
fo ± 15kHZ 3.0
SAFC83.160MA40X 1st IF 83.160 5.0 83.04 to 83.10 20 min. 1.5 N/S 10.0 850 ohm // –2.0pF SC511 TC,
83.22 to 83.28 20 min. TC11
fo ± 15kHZ 3.0
SAFC83.160MC40X 1st IF 83.160 5.0 83.04 to 83.10 20 min. 1.5 N/S 8.0 850 ohm // –2.0pF SC511 TC,
83.22 to 83.28 20 min. TC11
fo ± 13kHz 3 TC,
SAFC85.380ME35X 1st IF 85.38 5.5 85.26 to 85.32 25 1.5 N/S 10 870 ohm // –1.7pF SC59 TC11,
85.44 to 85.50 25 TC04
fo ± 630kHz 3 TC,
SAFC130.4MSC10T 1st IF 130.38 5.5 135.33 40 N/S N/S 0.8 435 ohm // 0.8uH SC57 TC11,
139.65 to 140.91 45 TC04
1930 to 1990 4.5 SC33 TC00,
SAFC1960ML1C0T RF (RX) 1960 4.5 1850 to 1910 15 3.0 2.5 —50 ohm // 0pF low TC05,
1719 to 1780 23 profile TC12
1850 to 1910 4.5 SC33 TC00,
SAFC1880ML1C0T RF (TX) 1880 4.5 1930 to 1990 9 3.0 2.5 —50 ohm // 0pF low TC05,
3860 to 3980 14 profile TC12
1850 to 1885 2.8
PCS 1867.5 2.8 1930 to 1965 30
RF 3700 to 3770 20 SC44 TC,
SAFC
1867.5T1897.5ML80T
split 1885 to 1910 2.8 1.8 1.8 —50 ohm // 0pF dual TC04
TX 1897.5 2.8 1965 to 1990 30 type TC11
3770 to 3820 20
209.75 to 211.01 5.0
SAFC210.38MWJSOX IF 210.38 8.5 130 to 209.13 33 —1.0 —
in 775 ohm // 68nH
SC513 TC02,
differential
211.63 to 270 33
out 465 ohm // 54nH
TC11
TC00,
SAFC902.5MA90N RF (TX) 902.5 4 890 to 915 4 1.7 2.5 N/S 50 ohm // 0pF SC33 TC05
935 to 960 20 TC11, TC12
890 to 915 3.5 TC00,
SAFC902.5MC90T RF (TX) 902.5 3.5 935 to 960 25 1.5 2.1 N/S 50 ohm // 0pF SC33 TC05,
1500 to 2000 40 TC11, TC12
890 to 915 3.5 TC00,
SAFC902.5MWC90T RF (TX) 902.5 3.5 935 to 960 25 1.5 2.3 —50 ohm // 0pF SC33 TC05,
GSM
differential
1500 to 2000 25 TC11, TC12
935 to 960 3.5 TC00,
SAFC947.5MC90T RF (TX) 947.5 3.5 890 to 915 35 1.5 2.3 N/S 50 ohm // 0pF SC33 TC05,
1500 to 2000 40 TC11, TC12
935 to 960 3 TC00,
SAFC947.5MD90T RF (TX) 947.5 3.5 890 to 915 20 1.5 2.2 —50 ohm // 0pF SC33 TC05,
1500 to 2000 23 TC11, TC12
935 to 960 3.8 TC00,
SAFC947.5MWC90T RF (TX) 947.5 3.8 890 to 915 35 1.5 2.3 —50 ohm // 0pF SC33 TC05,
differential
1200 to 1500 35 TC11, TC12
925 to 960 3.0 SC33 TC00,
SAFC942.5MD1C0T RF (RX) 942.5 3.0 880 to 905 18 1.7 2.8 —50 ohm // 0pF low TC05,
1850 to 2500 30 profile TC12
EGSM 925 to 960 4.3 SC33 TC00,
SAFC942.5MYJ1C0T RF (RX) 942.5 4.3 980 to 1100 23 2.2 2.8 —50 ohm // 0pF low TC05,
1600 to 2500 25 profile TC12
1805 to 1880 4.5 SC33 TC00,
SAFC1842.5ML1C0T RF (RX) 1842.5 4.5 1600 to 1710 35 3.0 2.5 —50 ohm // 0pF low TC05,
1980 to 3000 20 profile TC12
RF (RX) 925 to 960 3.7 SC44 TC,
EGSM 942.5 3.7 880 to 905 15 2.5 2.7 —50 ohm // 0pF dual TC04,
GSM SAFC
942.5T1842.5ML80T
1600 to 2000 25 type TC11
1800 RF (RX) 1805 to 1880 4.2 SC44 TC,
GSM1800 1842.5 4.2 1705 to 1785 7 2.5 2.7 —50 ohm // 0pF dual TC04,
2800 to 4000 15 type TC11
fo ± 80kHz 3 TC,
SAFC246.000MC30X 1st IF 246 5 245.6 and 246.4 25 1.0 N/S 2.5 420 ohm // –3.6pF SC59 TC04,
243 and 249 40 TC11
N/S: Not Specified.
‡
Tape codes and package quantities defined at the end of the SAW section of this catalog.
*IL for IF filters is guaranteed at center frequency relative to 0dB reference. I.L. for RF filters is guaranted across the pass band relative to 0dB reference level.
**Attenuation for IF filters is relative to center frequency loss. Attenuation for RF filters is relative to 0dB reference level.
CG01-I 351
CERAMIC MICROWAVE FILTERS
SAW FILTERS SPECIFICATIONS
SAF Series
CERAMIC MICROWAVE
FILTERS
Center I.L. Bandwidth Attenuation
Ripple
Max. Input/Output Pkg. Tape
Type Part Number Function Freq. (dB) (MHz) (dB) (dB) VSWR GDT Impedance Style Code‡
(MHz) max.* max. (s)
TX 902 to 904 4.5 TC00,
SAFC903MF90T or RX 903 4.5 926 to 928 35 1.5 — — 50 ohm // 0pF SC33 TC05,
944 to 948 40 TC11, TC12
TX 926 to 928 4.5 TC00,
ISM SAFC927MF90T or RX 927 4.5 902 to 904 35 1.5 ——50 ohm // 0pF SC33 TC05,
915 968 to 972 40 TC11, TC12
902 to 928 4.5 max. TC00,
SAFC915MA70N RF 915.0 4.5 790 to 860 30 min. 2.0 N/S N/S 50 ohm // 0pF SC44 TC04,
970 to 1040 20 min. TC11
fo ± 576MHz 3.0 TC,
DECT SAFU110.6MSA40T 1st IF 110.592 4.5 fo ± 1.15MHz 10 min. N/S N/S 0.7 300 ohm 1.2H SU511
fo ± 1.728MHz 30 min. TC11
806 to 825 4.0 max. TC,
SAFC815.5MA70N RF 815.5 4.0 761 to 780 20 min. 2.0 2.5 N/S 50 ohm // 0pF SC44 TC04,
LMR 851 to 870 20 min. TC11
851 to 870 4.0 max. TC,
SAFC860.5MA70N RF 860.5 4.0 806 to 825 20 min. 2.0 2.5 N/S 50 ohm // 0pF SC44 TC04,
896 to 915 15 min. TC11
314.7 to 315.3 3.0 TC,
SAFC315MF70T RF (RX) 315 3.0 293 to 293.9 50 1.5 2.0 —50 ohm // 0pF SC44 TC04,
357.5 to 358.7 50 TC11
868 to 870 4.5 TC,
SAFC869MF70T RF (RX) 869 4.5 825 to 828 40 1.5 ——50 ohm // 0pF SC44 TC04,
RKE 910 to 913 40 TC11
863 to 865 4.5 TC,
SAFC864MF70T RF (RX) 864 4.5 820 to 823 40 1.5 ——50 ohm // 0pF SC44 TC04,
905 to 908 40 TC11
433.05 to 434.7 4.5 TC,
SAFC434MC70T RF (RX) 433.9 4.5 389 to 392 50 1.5 2.0 —50 ohm // 0pF SC44 TC04,
475.5 to 478.5 50 TC11
1574 to 1577 2.8 SC33 TC00,
SAFC1575MB1C0S RF (RX) 1575.5 2.8 1382 to 1397 35 1.3 3.0 N/S 50 ohm // 0pF low TC05,
GPS 1478 to 1487 25 profile TC12
90 ± 1MHz 3.0 TC,
SAFC90MA31N IF 90 6.5 84 to 85 25 2.0 —0.5 365 ohm // –0.7pF SC59 TC04,
95 to 96 25 TC11
RF (TX) 940 to 960 4 TC00,
SAFC950MB90N 950 4 810 to 830 45 2 N/S 2.5 50 ohm // 0pF SC33 TC05,
800 1050 to 2000 35 TC11, TC12
940 to 960 3.5 TC00,
SAFC950MC90T RF (TX) 950 3.5 810 to 830 48 1.5 2.5 —50 ohm // 0pF SC33 TC05,
PDC 1050 to 2000 35 TC11, TC12
800 810 to 830 2.5 TC00
SAFC820ME90N RF (RX) 820 2.5 940 to 960 32 1.5 N/S 2.5 50 ohm // 0pF SC33 TC05
800 1100 to 2000 22 TC11. TC12
810 to 830 2.2 TC00,
SAFC820MD90T RF (RX) 820 2.2 940 to 960 30 1.3 2.5 —50 ohm // 0pF SC33 TC05,
1100 to 2000 22 TC11, TC12
1429 to 1453 2.7 TC00,
SAFS1441MC1B0T RF (TX) 1441 2.7 1477 to 1501 15 1.5 2.3 —50 ohm // 0pF SC22 TC05,
1783 to 1808 32 TC12
1477 to 1501 2 TC00,
PDC SAFC1489MC90S RF (RX) 1489 2 1429 to 1453 15 1.2 N/S 2.7 50 ohm // 0pF SC33 TC05,
1.5 1737 to 1761 35 TC11, TC12
1477 to 1501 2.7 TC00,
SAFC1489MC1B0T RX 1489 2.7 1429 to 1453 15 1.5 2.3 —50 ohm // 0pF SS22 TC05,
1735 to 1766 35 TC12
893 to 898 4.0
RF (TX) 895.5 4.0 810 to 830 22 2.1 2.5 —50 ohm // 0pF
895.5 1778 to 1796 20 SC33 TC00,
SAFC
895.5T942.5MF1D0T
925 to 960 3.5 dual TC05,
RF(TX) 942.5 3.5 870 to 885 18 2.3 3.2 —50 ohm // 0pF type TC12
PDC 942.5 1850 to 1920 10
Multi- 810 to 843 2.7
band RF (TX) 826.5 2.7 893 to 960 24 1.6 2.6 —50 ohm // 0pF
826.5 1300 to 2000 12 SC33 TC00,
SAFC
826.5T877.5MF1D0T
870 to 885 2.7 dual TC05,
RF (TX) 877.5 2.7 925 to 960 26 1.3 2.6 —50 ohm // 0pF type TC12
877.5 1300 to 2000 23
130 ± 16kHz 3.0
PDC SAFC130.000MA1G0X IF 130.0 5.5 130 ± 100kHz 22 0.5 —5 740 ohm // –1.1pF SC36 TC05,
All 130 ± 200kHz 40 TC11
N/S: Not Specified.
‡
Tape codes and package quantities defined at the end of the SAW section of this catalog.
*IL for IF filters is guaranteed at center frequency relative to 0dB reference. I.L. for RF filters is guaranted across the pass band relative to 0dB reference level.
**Attenuation for IF filters is relative to center frequency loss. Attenuation for RF filters is relative to 0dB reference level.
352 CG01-I
CERAMIC MICROWAVE FILTERS
SAW FILTERS SPECIFICATIONS
SAF Series
Center I.L. Bandwidth Attenuation
Ripple
Max. Input/Output Pkg. Tape
Type Part Number Function Freq. (dB) (MHz) (dB) (dB) VSWR GDT Impedance Style Code‡
(MHz) max.* max. (s)
887 to 925 4.5 TC00,
SAFC906ML90T RF (TX) 906 4.5 832 to 870 30 2.8 2.8 — 50 ohm // 0pF SC33 TC05,
JAPAN 2661 to 2775 20 TC11, TC12
CDMA 832 to 870 4.5 TC00,
SAFC851ML90T RF (RX) 851 4.5 887 to 925 22 3.0 2.8 —50 ohm // 0pF SC33 TC05,
1000 to 2000 20 TC11, TC12
1750 to 1780 3.5 TC00,
SAFC1765MF90T RF (TX) 1765 3.5 1840 to 1870 30 2.0 2.4 —50 ohm // 0pF SC33 TC05,
KOREA 3500 to 3560 25 TC11, TC12
PCS 1840 to 1870 3.5 TC00,
SAFC1855MF90T RF (RX) 1885 3.5 1750 to 1780 23 2.0 2.4 —50 ohm // 0pF SC33 TC05,
2300 to 4000 20 TC11, TC12
SAFC886ME70T RF 886.0 3.5 884 to 888 3.5 max. 1.5 N/S N/S 50 ohm // 10nH SC44 TC, TC04,
840 to 846 40 min. TC11
SAFC931ME70T RF 931.0 3.5 929 to 933 3.5 max. 1.5 N/S N/S 50 ohm // 10nH SC44 TC, TC04,
884 to 891 40 min. TC11
CT-1 913 to 915 3.5 max. TC,
SAFC914ME70T RF 914.0 3.5 891 to 894 30 min. 1.5 N/S N/S 50 ohm // 10nH SC44 TC04,
934 to 937 15 min. TC11
958 to 960 3.5 max. TC,
SAFC959ME70T RF 959.0 3.5 936 to 939 30 min. 1.5 N/S N/S 50 ohm // 10nH SC44 TC04,
979 to 982 20 min. TC11
1574 to 1577 2.8 SC33 TC00,
SAFC139MC70N RF (RX) 1575.5 2.8 1382 to 1397 35 1.3 3.0 N/S 50 ohm // 0pF low TC05,
1478 to 1487 25 profile TC12
90 ± 1MHz 3.0 TC,
SAFC146MC70N IF 90 6.5 84 to 85 25 2.0 —0.5 365 ohm // –0.7pF SC59 TC04,
95 to 96 25 TC11
RF (TX) 940 to 960 45
SAFC154MC70N 950 4 810 to 830 45 2 N/S 2.5 50 ohm // 0pF SC33 TC12
800 1050 to 2000 35
940 to 960 3.5 TC00,
SAFC162MC70N RF (TX) 950 3.5 810 to 830 48 1.5 2.5 —50 ohm // 0pF SC33 TC05,
PAGER 1050 to 2000 35 TC11, TC12
810 to 830 2.5
SAFC171MC70N RF (RX) 820 2.5 940 to 960 32 1.5 N/S 2.5 50 ohm // 0pF SC33 TC12
800 1100 to 2000 22
275 to 285 4.5 max. TC, TC04
SAFC280ME70N RF 280.0 4.5 180 to 242.5 48 min. 2.0 N/S N/S 230 ohm // –.2pF SC44 TC11
317.5 to 380 40 min.
276 to 286 4.5 max. TC, TC04
SAFC281ME70N RF 281.0 4.5 181 to 243.5 48 min. 2.0 N/S N/S 230 ohm // –.2pF SC44 TC11
318.5 to 381 40 min.
280 to 288 4.5 max. TC, TC04
SAFC284ME75N RF 284.0 4.5 184 to 246.5 48 min. 2.0 N/S N/S 230 ohm // –.2pF SC44 TC11
321.5 to 384 40 min.
928.8 to 932.2 4.5 max. TC, TC04
SAFC930.5ME70T RF 930.5 4.5 884.8 to 890.2 45 min. 2.0 N/S N/S 50 ohm // 10nH SC44 TC11
906.8 to 911.2 30 min.
N/S: Not Specified.
‡
Tape codes and package quantities defined at the end of the SAW section of this catalog.
*IL for IF filters is guaranteed at center frequency relative to 0dB reference. I.L. for RF filters is guaranted across the pass band relative to 0dB reference level.
**Attenuation for IF filters is relative to center frequency loss. Attenuation for RF filters is relative to 0dB reference level.
CG01-I 353
CERAMIC MICROWAVE FILTERS
SAW FILTERS SPECIFICATIONS
SAF Series
CERAMIC MICROWAVE
FILTERS
CERAMIC MICROWAVE FILTERS
SAW FILTERS
ENVIRONMENTAL SPECIFICATIONS
TEST ITEM PACKAGE TEST CONDITIONS TEST METHOD
Filter is soldered onto the center of PCB which is laid on two small supporters
SMD spaced 90mm apart. The PCB is deflected to 1mm below the horizontal level by the
pressing stick for 1 second and repeated 5 times.
Terminal Strength A force of 1.0 Kg shall be applied to each terminal in the direction of the axis of
terminal for 30 ± 5 seconds.
LEADED A force of 250 gf is applied to each lead in axial direction. The lead shall be bent
90 degrees to one direction, then in opposite direction and returned to the
original position.
Solderability BOTH Lead terminals are immersed in methanol with 7 to 10% of rosin flux for about MIL-STD-202E
5 seconds, then immersed in soldering bath at 230 ± 5°C for 5 ± 0.5 seconds. Method 208C
Random Drop BOTH Drop 3 times on concrete floor from 1.0 meter, (30cm for some products).
Vibration BOTH Vibration amplitude of 1.5mm at 10-55Hz in each of three mutually MIL-STD-201E
perpendicular directions for 1 hour. Method 201A
MECHANICAL
ENVIRONMENTAL
TEST ITEM PACKAGE TEST CONDITIONS TEST METHOD
Salt Spray BOTH Hold in chamber with 5% salt density at 35°C +1.1°/–1.7°C for 48 hours. MIL-STD-202E
Measure after exposure to room condition for 1 hour. Method 101D
Temperature Cycling BOTH Exposure to 5 cycles of –55°C (30 minutes) →+25°C (15 minutes), ±85°C MIL-STD-202E
(30 minutes) →+25°C (15 minutes). Test after 2 hours exposure to room conditions. Method 102A
Humidity BOTH Hold in chamber with 90 to 95% R.H. at 40 ± 2°C for 100 hours. Test after 2 MIL-STD-202E
hours exposure to room conditions. Method 103B
Operating Humidity BOTH Hold in chamber with 90 to 95% R.H. at 40 ± 2°C for 100 hours at 6VDC. MIL-STD-202E
Test after 2 hours exposure to room conditions.
Thermal Shock BOTH Expose to 5 cycles of –55°C (30 minutes) →+85°C (30 minutes). Test after 2 hours MIL-STD-202E
exposure to room conditions. Method 107D
Life Test (High) BOTH Hold in chamber at 85 ± 2°C for 100 hours. Test after exposure to room MIL-STD-202E
conditions for 2 hours. Method 108A
Life Test (Low) BOTH Hold in chamber at –30 ± 2°C for 100 hours. Test after exposure to room MIL-STD-202E
conditions for 2 hours. Method 108A
Operating Life Test BOTH Hold in chamber at 85 ± 2°C for 100 hours at 6VDC. Test after exposure to room
conditions for 2 hours.
Sulfuration BOTH Hold in chamber with 1000ppm sulfur density for 24 hours. Test after exposure
to room conditions for 2 hours.
Filter shall be preheated at 150 ± 20°C for 60 seconds, immersed whole
SMD electrode in soldering bath at 240 ± 5°C for 3 ± 1 seconds, then measured after
Resistance to exposure to room conditions for 2 hours. MIL-STD-202E
Soldering Heat Lead terminals are immersed up to 1.5mm from package base in soldering bath Method 210A
LEADED at 260 ± 5°C for 10 ± 1 seconds, then measured after exposure to room
conditions for 2 hours.
TEST ITEM PACKAGE TEST CONDITIONS TEST METHOD
Dielectric Withstanding BOTH Apply 100VDC between I/O terminals and ground terminal, for 1 minute. MIL-STD-202E
Voltage
Insulation Resistance BOTH Apply 100VDC between I/O terminals and ground terminal, for 1 minute. MIL-STD-202E
Method 302
Temperature SMD Filter shall be measured between –10°C to +60°C temperature range.
Characteristics LEADED Filter shall be measured between –10°C to +50°C temperature range.
ELECTRICAL
354 CG01-I
SAF Series
