Ver. CEDPublication date: March 2014 1
DSC5G02
Silicon NPN epitaxial planar type
For high-frequency amplification
DSC2G02 in SMini3 type package
Features
High transition frequency fT
Halogen-free / RoHS compliant
(EU RoHS / UL-94 V-0 / MSL: Level 1 compliant)
Marking Symbol: C5
Packaging
DSC5G02×0L
Embossed type (Thermo-compression sealing): 3
000 pcs / reel (standard)
Absolute Maximum Ratings Ta = 25°C
Parameter Symbol Rating Unit
Collector-base voltage (Emitter open) VCBO 30 V
Collector-emitter voltage (Base open) VCEO 20 V
Emitter-base voltage (Collector open) VEBO 3 V
Collector current IC15 mA
Collector power dissipation PC150 mW
Junction temperature Tj150 °C
Operating ambient temperature Topr –40 to +85 °C
Storage temperature Tstg –55 to +150 °C
Electrical Characteristics Ta = 25°C±3°C
Parameter Symbol Conditions Min Typ Max Unit
Collector-base voltage (Emitter open) VCBO IC = 10 mA, IE = 0 30 V
Emitter-base voltage (Collector open) VEBO IE = 10 mA, IC = 0 3 V
Base-emitter voltage VBE VCE = 6 V, IC = 1 mA 0.72 V
Forward current transfer ratio *1hFE VCE = 6 V, IC = 1 mA 65 260
Transition frequency fTVCE = 6 V, IC = 1 mA 450 650 MHz
Reverse transfer capacitance
(Common emitter) Cre VCE = 6 V, IC = 1 mA , f = 10.7 MHz 0.6 pF
Power gain PG VCE = 6 V, IC = 1 mA , f = 100 MHz 24 dB
Noise figure NF VCE = 6 V, IC = 1 mA , f = 100 MHz 3.3 dB
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
2.
*1: Rank classification
Code C D 0
Rank C D No-rank
hFE 65 to 160 100 to 260 65 to 260
Marking Symbol C5C C5D C5
Product of no-rank is not classified and have no marking symbol for rank.
Unit: mm
1: Base
2: Emitter
3: Collector
Panasonic SMini3-F2-B
JEITA SC-85
Code
Ver. CED
DSC5G02
2
PC Ta IC VCE hFE IC
VCE(sat) IC IC VBE Cob VCB
00 20016040 12080
50
200
150
100
250
Ambient temperature Ta (°C)
Collector power dissipation PC (mW)
DSC5G02_PC-Ta
0
0 12 2 10 4 8 6
20
16
12
8
4
Collector current IC (mA)
Collector-emitter voltage VCE (V)
DSC5G02_IC-VCE
Ta = 25°C
IB = 120 µA
30 µA
40 µA
50 µA
60 µA
70 µA
80 µA
90 µA
110 µA
100 µA
0
10−1
200
160
120
80
40
1 10 102
Forward current transfer ratio hFE
Collector current IC (mA)
DSC5G02_hFE-IC
25°C
−40°C
Ta = 85°C
VCE = 6 V
10−2
10−1
10−1
1
10
1 10 102
Collector-emitter saturation voltage VCE(sat) (V)
Collector current IC (mA)
DSC5G02_VCEsat-IC
25°C
−40°C
Ta = 85°C
IC / IB = 10
0
0 1.2 0.2 1.0 0.4 0.8 0.6
20
15
10
5
Collector current IC (mA)
Base-emitter voltage VBE (V)
DSC5G02_IC-VBE
−40°C
25°C
Ta = 85°C
VCE = 6 V
0
1
2.0
1.6
1.2
0.8
0.4
10 100
Collector-base voltage VCB (V)
DSC5G02_Cob-VCB
Collector output capacitance
(Common base, input open circuited) Cob
(pF)
IE = 0
f = 1 MHz
Ta = 25°C
fT IC
0
10−1
1
600
1
200
800
400
1 10 102
Transition frequency fT (MHz)
Collector current IC (mA)
DSC5G02_fT-IC
VCE = 6 V
Ta = 25°C
Ver. CED
DSC5G02
3
SMini3-F2-B Unit: mm
Land Pattern (Reference) (Unit: mm)
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any
other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any
other company which may arise as a result of the use of technical information described in this book.
(3) The products described in this book are intended to be used for general applications (such as office equipment, communications
equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book.
Consult our sales staff in advance for information on the following applications:
– Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment,
life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of
the products may directly jeopardize life or harm the human body.
It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with
your using the products described in this book for any special application, unless our company agrees to your using the products in
this book for any special application.
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company.
20100202
