SIDACtor (R) Protection Thyristors Broadband OptimizedTM Protection TwinChipTM Series - DO-214 Pb e3 RoHS Description TwinChipTM Series DO-214 are very low capacitance SIDACtor(R) devices designed to protect broadband equipment such as VoIP, DSL modems and DSLAMs from damaging overvoltage transients. This series provides a surface mount solution that enables equipment to comply with global regulatory standards, while limiting the impact to broadband signals. Features and Benefits * Low voltage overshoot * 40% lower than comparable product * Low on-state voltage Agency * 2nd level interconnect is Pb-free per IPC/JEDEC J-STD-609A.01 * Does not degrade surge capability after multiple surge events within limit. Agency Approvals Agency File Number * Low distortion E133083 * Fails short circuit when surged in excess of ratings Pinout Designation Applicable Global Standards NOT APPLICABLE Schematic Symbol * TIA/968-A * YD/T 1082 * ITU K.20/21 * YD/T 993 * IEC 61000-4-5 * YD/T 950 * GR 1089 Intra-building Electrical Characteristics Part Number P0642SALRP P0722SALRP P0902SALRP P1102SALRP P1302SALRP P1502SALRP P1802SALRP P2302SALRP P2602SALRP P3002SALRP P3502SALRP P4202SALRP P4802SALRP P6002SALRP Marking P062A P072A P092A P112A P132A P152A P182A P232A P262A P302A P352A P422A P482A P602A VDRM @lDRM=5A VS @100V/s IH IS IT VT @IT =2.2 Amps V min V max mA min mA max A max V max pF min pF max 58 65 75 90 120 140 170 190 220 280 320 380 440 550 77 88 98 130 160 180 220 260 300 360 400 500 600 700 120 120 120 120 120 120 120 120 120 120 120 120 120 120 800 800 800 800 800 800 800 800 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 8 8 8 8 8 8 8 8 8 8 8 8 8 8 25 20 20 15 15 15 10 10 10 10 10 10 5 5 45 45 40 35 35 30 30 25 25 25 20 20 20 20 @1MHz, 2V bias Table continues on next page. (c) 2014 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/07/14 1 Twin ChipTM Series SIDACtor (R) Protection Thyristors Broadband OptimizedTM Protection Electrical Characteristics (continued) Part Number P0642SBLRP P0722SBLRP P0902SBLRP P1102SBLRP P1302SBLRP P1502SBLRP P1802SBLRP P2302SBLRP P2602SBLRP P3002SBLRP P3502SBLRP P4202SBLRP P4802SBLRP P6002SBLRP P3002SCLRP P3502SCLRP P4202SCLRP P4802SCLRP P6002SCLRP Marking VDRM @lDRM=5A VS @100V/s IH IS IT VT @IT =2.2 A V min V max mA min mA max A max V max pF min pF max 58 65 75 90 120 140 170 190 220 280 320 380 440 550 280 320 380 440 550 77 88 98 130 160 180 220 260 300 360 400 500 600 700 360 400 500 600 700 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 25 20 20 15 15 15 10 10 10 10 10 10 5 5 20 20 15 15 10 45 45 40 35 35 30 30 25 25 25 20 20 20 20 35 30 30 30 25 P062B P072B P092B P112B P132B P152B P182B P232B P262B P302B P352B P422B P482B P602B P302C P352C P422C P482C P602C @1MHz, 2V bias Notes: - Absolute maximum ratings measured at TA= 25C (unless otherwise noted). - Devices are bi-directional (unless otherwise noted). Series Surge Ratings A IPP ITSM di/dt 0.2x310 0.5x700 2 2x10 2x10 2 8x20 1.2x50 2 10x160 10x160 2 10x560 1 10x560 2 5x320 1 9x720 2 10x360 1 10x360 2 10x1000 1 10x1000 2 5x310 1 10x700 2 50/60 Hz A min A min A min A min A min A min A min A min A min A min A/s 20 150 150 90 50 75 75 45 75 20 500 1 1 1 1 B 25 250 250 150 100 100 125 80 100 25 500 C 50 500 400 200 150 200 175 100 200 30 500 Notes: 1 Current waveform in s 2 Voltage waveform in s - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP ratings applicable over temperature range of -40C to +85C - The device must initially be in thermal equilibrium with -40C < TJ < +150C (c) 2014 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/07/14 2 Twin ChipTM Series SIDACtor (R) Protection Thyristors Broadband OptimizedTM Protection Thermal Considerations Package Symbol DO-214AA Parameter Value Unit TJ Operating Junction Temperature Range -40 to +150 C TS Storage Temperature Range -65 to +150 C 90 C/W R0JA Thermal Resistance: Junction to Ambient V-I Characteristics tr x td Pulse Waveform IPP - Peak Pulse Current - %IPP +I IT IS IH IDRM -V +V VT VDRM VS tr = rise time to peak value td = decay time to half value Peak Value 100 Waveform = tr x td 50 Half Value 0 0 td tr t - Time (s) -I Normalized DC Holding Current vs. Case Temperature 14 12 10 IH 8 6 25 C 4 2 IH (TC = 25C) 2.0 Ratio of Percent of VS Change - % Normalized VS Change vs. Junction Temperature 0 -4 -6 1.8 1.6 1.4 1.0 0.8 0.6 0.4 -8 -40 -20 0 -40 20 40 60 80 100 120 140 160 -20 0 20 40 60 80 100 120 140 160 Case Temperature (TC) - C Junction Temperature (TJ) - C (c) 2014 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/07/14 25C 1.2 3 Twin ChipTM Series SIDACtor (R) Protection Thyristors Broadband OptimizedTM Protection Soldering Parameters - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) Pb-Free assembly (see Fig. 1) +150C +200C 60-180 secs. Average ramp up rate (Liquidus Temp (TL) to peak) 3C/sec. Max. TS(max) to TL - Ramp-up Rate 3C/sec. Max. Reflow - Temperature (TL) (Liquidus) +217C - Temperature (tL) 60-150 secs. Peak Temp (TP) +260(+0/-5)C Time within 5C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6C/sec. Max. Time 25C to Peak Temp (TP) 8 min. Max. Do not exceed +260C Figure 1 TP TL TS(max) tL Ramp-down Preheat TS(min) tS time to peak temperature (t 25C to peak) Time Environmental Specifications High Temp Voltage Blocking 80% Rated VDRM (VAC Peak ) +125C or +150C, 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 Temp Cycling -65C to +150C, 15 min. dwell, 10 up to 100 cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased Temp & Humidity 52 VDC (+85C) 85%RH, 504 up to 1008 hrs. EIA/ JEDEC, JESD22-A-101 High Temp Storage +150C 1008 hrs. MIL-STD-750 (Method 1031) JEDEC, JESD22-A-101 Low Temp Storage -65C, 1008 hrs. Thermal Shock 0C to +100C, 5 min. dwell, 10 sec. transfer, 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Part Marking Code Autoclave (Pressure Cooker Test) +121C, 100%RH, 2atm, 24 up to 168 hrs. EIA/ JEDEC, JESD22-A-102 Date Code Resistance to Solder Heat +260C, 30 secs. MIL-STD-750 (Method 2031) Moisture Sensitivity Level 85%RH, +85C, 168 hrs., 3 reflow cycles (+260C Peak). JEDEC-J-STD-020, Level 1 Lead Material Copper Alloy Terminal Finish 100% Matte-Tin Plated UL recognized epoxy meeting flammability classification 94V-0 Part Marking Pxxxx xxxxx Critical Zone TL to TP 25 Physical Specifications Body Material tP Ramp-up Temperature Reflow Condition (Refer to Electrical Characteristics Table) (c) 2014 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/07/14 4 Twin ChipTM Series SIDACtor (R) Protection Thyristors Broadband OptimizedTM Protection Dimensions -- DO-214AA Pad Outline Case Temperature Measurement Point B D 0.110 (2.8) C A 0.079 (2.0) H E Dimensions 0.079 (2.0) inch (millimeter) F K Inches Millimeters Min Max Min Max A 0.130 0.156 3.30 3.95 B 0.201 0.220 5.10 5.60 C 0.077 0.087 1.95 2.20 D 0.159 0.181 4.05 4.60 E 0.030 0.063 0.75 1.60 F 0.075 0.096 1.90 2.45 G 0.002 0.008 0.05 0.20 H 0.077 0.104 1.95 2.65 K 0.006 0.016 0.15 0.41 G Part Numbering P xxx 2 S x L RP REEL PACK TYPE SIDACtor RoHS COMPLIANT MEDIAN VOLTAGE CONSTRUCTION VARIABLE IPP RATING PACKAGE TYPE Packing Options Description Quantity Added Suffix Industry Standard DO-214AA Tape & Reel 2500 RP EIA-481-D Package Type S Tape and Reel Specification -- DO-214AA 0.157 (4.0) 0.472 (12.0) 0.36 (9.2) 0.315 (8.0) 0.059 DIA (1.5) 12.99 (330.0) 0.512 (13.0) Arbor Hole Dia. 0.49 (12.4) (c) 2014 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/07/14 Cover tape Dimensions are in inches (and millimeters). Direction of Feed 5 Twin ChipTM Series Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Littelfuse: P4802SBLRP P6002SBLRP