TYPE CRG SERIES
Product – Specification
1st April 2003
ISSUE 2
Telephone Tyco Passive Product Support Team ++ 44 (0) 1793 572484
Website – passives.tycoelectronics.com Email – passivesales@tycoelectronics.com
Page 1 of 4
Thick Film Chip Resistors
TYPE CRG SERIES
Precious metal terminations are screen printed
onto a ceramic base and fired. The resistive
element is screen printed and fired and the
passivation layer added. Each resistor is
trimmed to tolerance by laser. The pre-scribed
tile is broken into strips, the end plating is fired
on and the strips broken into individual
components. Final termination is made by
electroplating.
KEY FEATURES
• Thick film resistors with a high power
to size ratio, ideally suited to industrial
and general purpose use. A range from
1 ohm to 10 Mohms and tolerances of
1% and 5%. Also including zero ohm
links.
• CRG chip resistors are suitable for
most applications, including high
frequency operation, owing to the short
lead structure and low capacitance.
STOCKISTS:
This product is stocked by RS and Micromark.
TYPE CRG SERIES
Product – Specification
1st April 2003
ISSUE 2
Telephone Tyco Passive Product Support Team ++ 44 (0) 1793 572484
Website – passives.tycoelectronics.com Email – passivesales@tycoelectronics.com
Page 2 of 4
DIMENSIONS
DERATING CURVE
SPECIFICATIONS
UNITS 0402 0603 0805
Rated Power @ 70 °C Watts 0.063 0.1 0.125
Resistance Range Min Ohms 10 1 10 10 1 10 10 1 10
Max Ohms 1M0 9R1 3M3 1M0 9R1 10M 1M0 9R1 10M
% 1 5 5 1 5 5 1 5 5 Tolerance
Code letter F J J F J J F J J
Selection Series
E24 E24 E24 E24
E96
E24 E24 E24
E96
E24 E24
Temperature Coefficient ppm/°C ±100 ±350 ±200 ±100 ±350 ±200 ±100 ±350 ±200
1206 2010 2512
Rated Power @ 70 °C Watts 0.25 0.5 1
Resistance Range Min Ohms 10 1 10 10 1 10 10 1 10
Max Ohms 1M0 9R1 10M 1M0 9R1 10M 1M0 9R1 10M
% 1 5 5 1 5 5 1 5 5 Tolerance
Code letter F J J F J J F J J
Selection Series E24
E96
E24 E24 E24
E96
E24 E24 E24
E96
E24 E24
Temperature Coefficient ppm/°C ±100 ±350 ±200 ±100 ±350 ±200 ±100 ±350 ±200
UNITS 0402 0603 0805 1206 2010 2512
Working Voltage Volts 50 75 150 200 200 200
Maximum Overload Voltage Volts 100 150 300 400 400 400
Operating Temperature Range °C -55 to +125
Climatic Category 55/125/56
Insulation Resistance Dry Min Mohms 1,000
Stability % 3
Surface Temp Rise Max °C/W 400
Zerohm Current Max Amps 1 1 2 2 2 2
Resistance Max <20 mohm
STYLE L W t a b
0402 1.0 ± 0.1 0.5 ± 0.1 0.35 ± 0.05 0.2 ± 0.1 0.25 ± 0.1
0603 1.6 ± 0.1 0.8 ± 0.1 0.45 ± 0.1 0.3 ± 0.2 0.2 ± 0.1
0805 2.1 ± 0.2 1.3 ± 0.1 0.5 ± 0.1 0.4 ± 0.2 0.3 ± 0.2
1206 3.1 ± 0.2 1.55 ± 0.1 0.55 ± 0.1 0.45 ± 0.2 0.4 ± 0.2
2010 5.0 ± 0.2 2.5 ± 0.2 0.6 ± 0.1 0.6 ± 0.2 0.6 ± 0.2
2512 6.4 ± 0.2 3.2 ± 0.2 0.6 ± 0.1 0.7 ± 0.2 0.7 ± 0.2
TYPE CRG SERIES
Product – Specification
1st April 2003
ISSUE 2
Telephone Tyco Passive Product Support Team ++ 44 (0) 1793 572484
Website – passives.tycoelectronics.com Email – passivesales@tycoelectronics.com
Page 3 of 4
MOUNTING
The resistors are suitable for processing on automatic placement equipment.
MARKING
CRG0805, CRG1206, CRG2010, CRG2512
E24 series resistors are marked with a three digit code.
E96 series resistors are marked with a four digit code.
Zerohm components are marked '0'.
CRG0603
E24 5% series are marked with a three digit code.
E24 1% series are marked with a three digit code.
E96 series are marked with the international alphanumeric three character code (available on request).
EXCEPT 10, 11, 13, 15, 20 & 75 decades which are marked as the E24 series.
CRG0402 series unmarked.
STORAGE
Unopened reels should be stored within a temperature range of +5 °C to +25 °C, separated from any dust, chemicals and solvent based
materials. Non-adherence to this procedure could effect the solderability of this product.
PACKAGING
All chip resistors are supplied on reels. For details, see figures 1 - 4. Also available in bulk cassettes.
TYPE CRG SERIES
Product – Specification
1st April 2003
ISSUE 2
Telephone Tyco Passive Product Support Team ++ 44 (0) 1793 572484
Website – passives.tycoelectronics.com Email – passivesales@tycoelectronics.com
Page 4 of 4
PACKAGING (cont'd)
Larger reel sizes available on request.
PERFORMANCE CHARACTERISTICS
The evaluation of the performance characteristics is carried out with reference to IECQ specifications QC 400 000 and QC 400 100.
HOW TO ORDER
Orders for these components should include the following information:-
Type, tolerance code letter and value
e.g. CRG0603 J 1K0 (CRG0603ZR for zerohm links)
0402 0603 0805 1206 2010 2512
Tape Width 8 8 8 8 12 12
Pitch 2 4 4 4 4 4
A
tol
0.63
± 0.05
1.1
± 0.2
1.65
± 0.2
2.0
± 0.15
2.9
± 0.1
3.4
± 0.1
B
tol
1.13
± 0.05
1.9
± 0.2
2.4
± 0.2
3.6
± 0.2
5.3
± 0.1
6.6
± 0.1
t1
tol
0.55
± 0.1
0.7
± 0.1
0.9
± 0.1
0.9
± 0.1
1.0
± 0.1
1.0
± 0.1
t2 max 0.5 0.8 1 1 - -
Reel qty. 10000 5000 5000 5000 4000 4000
TEST REF Long Term Tests ±(3% + 0.1 ohm)
4.23 Climatic sequence
4.24 Damp heat, steady state
4.25.1 Endurance at 70 °C
4.25.3 Endurance at 125 °C
TEST REF Short Term Tests ±(1% + 0.05 ohm)
4.13 Overload
4.32 Adhesion
4.33 Bond strength of end face plating
4.19 Rapid change of temperature
4.18 Resistance to soldering heat
This publication is issued to provide outline information only and (unless specifically agreed to the contrary by the Company in writing) is not to form part of any order or be
regarded as a representation relating to the products or service concerned. We reserve the right to alter without notice the specification, design, price or conditions of
supply of any product or service. Whilst Tyco Electronics Components products are of the very highest quality and reliability, all electronic components can occasionally
be subject to failure. Where failure of a Tyco Electronics Components product could result in life threatening consequences, then the circuit and application must
be discussed with the Company. Such areas might include ECG, respiratory and other medical and nuclear applications and any non fail-safe applications circuit.
