Product - Specification 1st April 2003 ISSUE 2 TYPE CRG SERIES Thick Film Chip Resistors KEY FEATURES TYPE CRG SERIES Precious metal terminations are screen printed onto a ceramic base and fired. The resistive element is screen printed and fired and the passivation layer added. Each resistor is trimmed to tolerance by laser. The pre-scribed tile is broken into strips, the end plating is fired on and the strips broken into individual components. Final termination is made by electroplating. * * Thick film resistors with a high power to size ratio, ideally suited to industrial and general purpose use. A range from 1 ohm to 10 Mohms and tolerances of 1% and 5%. Also including zero ohm links. CRG chip resistors are suitable for most applications, including high frequency operation, owing to the short lead structure and low capacitance. STOCKISTS: This product is stocked by RS and Micromark. Telephone Tyco Passive Product Support Team ++ 44 (0) 1793 572484 Page 1 of 4 Website - passives.tycoelectronics.com Email - passivesales@tycoelectronics.com Product - Specification 1st April 2003 ISSUE 2 TYPE CRG SERIES SPECIFICATIONS UNITS 0402 0603 0805 Rated Power @ 70 C Resistance Range Min Max Tolerance Code letter Selection Series Watts Ohms Ohms % 10 1M0 1 F E24 0.063 1 9R1 5 J E24 10 3M3 5 J E24 0.1 1 9R1 5 J E24 10 10M 5 J E24 0.125 1 9R1 5 J E24 10 10M 5 J E24 Temperature Coefficient ppm/C 100 350 200 350 200 350 200 Rated Power @ 70 C Resistance Range Min Max Tolerance Code letter Selection Series Watts Ohms Ohms % Temperature Coefficient ppm/C UNITS Working Voltage Maximum Overload Voltage Operating Temperature Range Climatic Category Insulation Resistance Dry Min Stability Surface Temp Rise Max Zerohm Current Max Resistance Max Volts Volts C Mohms % C/W Amps 10 1M0 1 F E24 E96 100 10 1M0 1 F E24 E96 100 1206 2010 0.25 1 9R1 5 J E24 10 10M 5 J E24 0.5 1 9R1 5 J E24 10 10M 5 J E24 350 200 350 200 10 1M0 1 F E24 E96 100 10 1M0 1 F E24 E96 100 2512 10 1M0 1 F E24 E96 100 1 1 9R1 5 J E24 10 10M 5 J E24 350 200 0402 0603 0805 1206 2010 2512 50 100 75 150 150 300 200 400 200 400 200 400 2 2 2 -55 to +125 55/125/56 1,000 3 400 1 1 2 <20 mohm DIMENSIONS STYLE L W t a b 0402 0603 0805 1206 2010 2512 1.0 0.1 1.6 0.1 2.1 0.2 3.1 0.2 5.0 0.2 6.4 0.2 0.5 0.1 0.8 0.1 1.3 0.1 1.55 0.1 2.5 0.2 3.2 0.2 0.35 0.05 0.45 0.1 0.5 0.1 0.55 0.1 0.6 0.1 0.6 0.1 0.2 0.1 0.3 0.2 0.4 0.2 0.45 0.2 0.6 0.2 0.7 0.2 0.25 0.1 0.2 0.1 0.3 0.2 0.4 0.2 0.6 0.2 0.7 0.2 DERATING CURVE Telephone Tyco Passive Product Support Team ++ 44 (0) 1793 572484 Page 2 of 4 Website - passives.tycoelectronics.com Email - passivesales@tycoelectronics.com Product - Specification 1st April 2003 ISSUE 2 TYPE CRG SERIES MOUNTING The resistors are suitable for processing on automatic placement equipment. MARKING CRG0805, CRG1206, CRG2010, CRG2512 E24 series resistors are marked with a three digit code. E96 series resistors are marked with a four digit code. Zerohm components are marked '0'. CRG0603 E24 5% series are marked with a three digit code. E24 1% series are marked with a three digit code. E96 series are marked with the international alphanumeric three character code (available on request). EXCEPT 10, 11, 13, 15, 20 & 75 decades which are marked as the E24 series. CRG0402 series unmarked. STORAGE Unopened reels should be stored within a temperature range of +5 C to +25 C, separated from any dust, chemicals and solvent based materials. Non-adherence to this procedure could effect the solderability of this product. PACKAGING All chip resistors are supplied on reels. For details, see figures 1 - 4. Also available in bulk cassettes. Telephone Tyco Passive Product Support Team ++ 44 (0) 1793 572484 Page 3 of 4 Website - passives.tycoelectronics.com Email - passivesales@tycoelectronics.com Product - Specification 1st April 2003 ISSUE 2 TYPE CRG SERIES PACKAGING (cont'd) Tape Width Pitch A tol B tol t1 tol t2 max Reel qty. 0402 0603 0805 1206 2010 2512 8 2 0.63 0.05 1.13 0.05 0.55 0.1 0.5 10000 8 4 1.1 0.2 1.9 0.2 0.7 0.1 0.8 5000 8 4 1.65 0.2 2.4 0.2 0.9 0.1 1 5000 8 4 2.0 0.15 3.6 0.2 0.9 0.1 1 5000 12 4 2.9 0.1 5.3 0.1 1.0 0.1 4000 12 4 3.4 0.1 6.6 0.1 1.0 0.1 4000 Larger reel sizes available on request. PERFORMANCE CHARACTERISTICS The evaluation of the performance characteristics is carried out with reference to IECQ specifications QC 400 000 and QC 400 100. TEST REF 4.23 4.24 4.25.1 4.25.3 TEST REF 4.13 4.32 4.33 4.19 4.18 Long Term Tests (3% + 0.1 ohm) Climatic sequence Damp heat, steady state Endurance at 70 C Endurance at 125 C Short Term Tests (1% + 0.05 ohm) Overload Adhesion Bond strength of end face plating Rapid change of temperature Resistance to soldering heat HOW TO ORDER Orders for these components should include the following information:Type, tolerance code letter and value e.g. CRG0603 J 1K0 (CRG0603ZR for zerohm links) This publication is issued to provide outline information only and (unless specifically agreed to the contrary by the Company in writing) is not to form part of any order or be regarded as a representation relating to the products or service concerned. We reserve the right to alter without notice the specification, design, price or conditions of supply of any product or service. Whilst Tyco Electronics Components products are of the very highest quality and reliability, all electronic components can occasionally be subject to failure. Where failure of a Tyco Electronics Components product could result in life threatening consequences, then the circuit and application must be discussed with the Company. Such areas might include ECG, respiratory and other medical and nuclear applications and any non fail-safe applications circuit. Telephone Tyco Passive Product Support Team ++ 44 (0) 1793 572484 Page 4 of 4 Website - passives.tycoelectronics.com Email - passivesales@tycoelectronics.com