= Tyco Electronics DS13 Series High Performance Solid State Relays For Loads Up To 2A @ G0Vde Product Facts @ Standard options: short circuit/overload protection and contro! status. E Optically coupled all solid state retay. Mi TTL & CMOS compatible input. Low on-resistance power MOSFET output. Wi Tested per MIL-PRF-28750D and approved to DSCC - drawing 90091. @ Ail versions available with Tyco Electronics W level screening for CH relays. 2 Terminal Input Configuration DS13 series SSRs employ state of the art photo- voltaic optical isolation and power MOSFET output chips for ultra-reliable high speed switching of DC loads up to 2 amps, with low on-resistance. Standard options include integral cur- rent overload/short circuit protection and a separate input contro! status line. The overload feature pro- vides protection of the . relay, foad and lead circuit wiring in the event of a sus- tained current overload or short circuit while the relay is on or when it is turned on into a short. The control status provides a built-in test function which provides a logic O when the input circuit is energized and functional. The relay is packaged into a custom hermetically sealed low- profile 8-pin ceramic DIP package, with through hole or surface maunt pins. Cli PartNo. DSCC Dwg. No. Relay Version DS13-1Y $0091-008 Basic relay DS13-1000 90091-004 Relay w/ short circuit protection DS13-1001 90091 -006 Relay w/ control status DS13-1002 90091-002 Relay w/ short circult protection and control status Notes: Add suffix S to part number for surface mount versions, Add suffix T to part number for tinned leads. Add suffix W? to part number for lower screening level. Direct Drive TTL Drive 81 R Series (+) Output -7 R Series Output F-717 Veo VecOO (* 4 Load HOV og pf hed FOV Loa 1 4 ~ o 2 Control 1 > _ { Controt {> - a 8 on Return ~~ Load Return Load . Load oat (.) Output Low Return (3 Output Lowy Return ) Output bod OCTTL 3 Terminai Input Configuration With Status Without Status V status R Status SO O- tus (+) Output F7 (4) Outpul 7-77 Vcc O--- Output oa Load FOV oa Yeo O- pt head FOV Load 417. 1 4 2 , 2 Veontrol OJ --- contralO ---H+ Control Controt 8 8 5 Return ~ Load ve Load Load net La nnn abo { (3 Output Lowy Retarn ) Output LJ} Retum 2008 dy Tyco Electronics Corporation. Ail Rights Reserved. Cll, TE Loge and Tyco Electronics are trademarks. Dimensions are in inches and millimeters uniess otherwise specified. Values in brackets are metris equivatents, Catalog 8-1773439-9 Revised 3-08 www.tycoelectranics.com USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C, America: 52-55-7106-0803 Dimensions are shown for reference purposes only. Specifications subject to change. South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639= Tyco Electronics Environmental Characteristics Ambient Temperature Range: Operating: -55C to 4105C. Storage: -55C to +125C. Vibration Resistance: 160 Gs, 10-3,000 Hz. Shock Aesistance: 1,500 G's, 0.5 ms pulse. Constant Acceleration Resistance: 5,000 Gs. High Performance Electronic Products DS13 SSR for loads up to 2A @ 6OVAe (continues) Electrical Specifications (-55C to +105C unless otherwise specified) Input (2 terminal configuration} Input supply voltage range (Vcc) input current (max.) @ 5dc 3.8 - 32 Vde {Notes 1 & 2, Figures 1 & 2} 1amAde (Notes 1 & 2, Figures 1 & 2) Must turn-on voltage 3.8Vde Must turn-off voltage 1.5Vde Reverse voltage protection -32Vde Input (3 terminal configuration} Control voltage range Q-18 Vcc Control current (max.) Input supply voltage range (Vcc) Input current (max.) @ 5Vde 240pAcc @ SV, ImA @ 18V 3.8 - 32 Vde (Notes 7 & 2, Figures 1 & 2) 15mAdcc (Notes 1 & 2, Figures 1 & 2} Mechanical Characteristics Must tum-on voltage 0.3Vde Weight (max.): Must turn-off voltage 3.2Vde .07 02. (2 grams) rT) Materials: ; Dielectric Strength {min.) 1,000V rms base: Or hermetically sealed, Insulation Resistaice (min.) @ 500Vdc 109 ohms Pins: Copper, gold plated Capacitance (max.) 10pF Gutput Continuous load current {max.} @ 25C, without short circuit protection 2.0Adc (Figure 5, Note 3) Continuous load current (max.) @ 25C, with short circuit protection 1.0Ade (Figure 5, Note 3} Continuous load voltage (max.) 6OVde Transient blecking voltage {max.) Gn resistance (max.) @ iF = 25C, ly = 100ma, with short circuit protection 80Vee (Note 4) 0.45 ohm (Note 5, Figure 4) On resistance {(max.) @ Tj = 256, |) = 100ma, without short circuit protection 0.22 ohm (Note 5, Figure 4) Output voltage drop (max), with short circuit protection 0.6Vde Output voltage drop (max.}, without short circuit protection 0.75Vde Off-state leakage current {max.} @ 60Vde 100pAdc Tura-on time (max.) 1.5 ms (Figure 3) Turn-off time (max.) .25 ms (Figure 3) dv/dt (min) 100V / us Electrical system spike +600Vdc {Note 4) Junction temperature (max.) 150C Thermal resistance (max.}, junction to ambient BOCAV Thermal resistance {max,}, junction to case 20C/AV Status Status supply voltage 30Vdc Status sink current (max,} @ Vstatuss 0.8Vde amAde (Note 7} Status leakage current (max.) @ 15Vdc 4pAdc Short Circuit Protection Ses Figure 6, Note 7 Catalog 8-1773439-9 Revised 3-08 www.tycoelectronies.com Dimensions are in inches and millimeters unless otherwise specified, Values in brackets are metric equivalents, Dimensions are shown for USA: 1-800-622-6752 reference purposes only. Canada: 1-905-470-4425 Specifications subject Mexico: 1-800-733-8926 to change. C. America: 52-55-17106-0863 South America: 55-1 1-2103-6000 Hong Kong: 852-2735-1628 dapan: 81-44-844-8013 UK: 31-73-624-6639 Tyco Electronics High Performance Electronic Products DS13 SSR for loads up to 2A @ G0Vde continues} Figure 1 - Maximum Input Current vs. input Voltage Figure 2 - Series Resistance vs. Vec Supply Voltage (Note 1) 18 2000 = be 1500 = 12 f| f= @ ae 5 9 . 8 1000 A 2 6 a Y = o 500 4 3 | A Q 0 0 5 16 15 20 25 30 40 50 60 0 5 18 #15 20 2 30 35 Input Voltage, Vec (Vdc) Vcc (Volts) Figure 3 ~ Output Tura-on and Turn-off Timing Figure 4 - On-Resistance vs. Temperature (Note 6) V i So 2 Control High : Pin 2 = 1.8 Low 2 1.6 Vv 3s 14 Output Off Bie Pin el 80% 212 FL 10% On ZS 1 | | 5 08 >! Ton oe g o6 = 04 E 0.2 = 25 50 75 100 125 Junction Temperature (C) Figure 5 - Temperature Derating Curve Figure 6 - Typical Current Trip Levels 2.0 a DS13-1 2 4 & 15 DS13-1001 S&S 5 1.0 a 2 2 05 DS13-1000 wo s D$13-1002 S 4 ol wm 0.0 -95 15 25 35 45 55 65 75 85 95 106 115125 : 0.01 0.7 1 10 100 1000 Ambient Temperature (C Pp (C) Time (seconds) Catalog 8-1773439-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 56-11-2103-6000 Revised 3-08 millimeters uniess otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 dapan: 81-44-844-8013 www.tyceelectronics.com are metric equivalents. to change. C. America: 52-55-1168-0803 UK: 31-73-624-6839= = Tyco Electronics High Performance Electronic Products DS13 SSR for loads up to 2A @ GOVE ontines) Figure 7 - Outline Dimensions Through-Hole Mount Version 010 .002 560 MAX. _| (14.22) 87 5 (.25 = .05) 6 PLS 7 400 + 045 485 +.010, ~.005 (10.18 .38) Surface Mount Version FG 560 MAX, (14.22) | _, oF of nm 1 .395 MAX. (10.03) No | (12.32 +.28, -13) 10.8) - | 435 MAX | | (11.05) J / 2 4 wey, ote one f UB YU, TOP INDEX MARK FOR PIN 1 ion >lle- (25 = 05) L top INDEX MARK FOR PIN 4 SIDEINDEXMARK FOR PINY | prs (SIDE INDEX MARK FOR PIN4 016 +.010,-.0085 (41 4.28, ~13) .155 MAX. 036 +.010,-005 ~} - 155 MAX. 6 PLS (3.94) (91 4.25, -13} (3.94) i 6 PLS FF 150 + 095 125 (3.81 + 38) Age | 6 PLS 100 m lie 018 + 002 125 4 (2.54) 300 pf (46 05) (3.18) | (7.62) 6 PLS 400 018 002 (.46 .08} (2.54) 300 (762) | 6 PLS Notes 1.2 terminal input configuration is compatible with CMOS or open collector TTL (with pull-up resistor). For Vec levels above 6Vce, a series limiting resistor is required. See Fig. 2 for resistor value. Use standard resistor value equal to or less than value form the curve. 2. Veo = 5Vde for all fests unless otherwise specified. 3.All D513 Series relays may drive loads connected to either positive or negative referenced power supply lines, Reversing polarity of output may cause permanent damage. Inductive loads must be diode suppressed. 4, Tsansient blocking voltage & electrical system: spike tesis are performed per MIL-STD-704 (28Vde systems). 5.To determine the maximum on-resistance at any given junction temperature, multiply on-resistance at 25C by rormatized on-resistance facter from curve (Fig. 4). 6. Overtoad testing per MIL-R-28750 is constrained to the limits imposed by the short circuit protection requirements of this specification and DSCC drawing 90091. Load circuit series inductance for load shorted" mode of operation te be limited to 50mH max. Maximum repetition rate into a shorted {oad should not exceed 10 Hz. To calculate maximum on-resistance at any temperature, use the follawing equation: R(on) = R(on} @ 25C x NF (without shert circuit protection} and R{on} = 0.2 x NF + .21 (with short circuit protection) where NF = normalized on-resistance factor from Fig. 4. 7.Proper operation of the status feedback requires a status pull-up resistor. Select the status resistor such that it limits status output current to 2mA: R status = V status 0.3V / 2mA, 8-1773439-9-PDF-KRG-3-08 Dimensions are in inches and Dimensions are shown for millimeters uniess otherwise teference purposes only, . specified. Values in brackets Specifications subject www. tycoelectrenics.com are metric equivalents. to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 34-73-624-6639