www.ti.com
FEATURES
1
2
3
4
8
7
6
5
OUT1
IN1−
IN1+
VCC−
VCC+
OUT2
IN2−
IN2+
D (SOIC), DGK (MSOP), OR P (PDIP) PACKAGE
(TOP VIEW)
DESCRIPTION/ORDERING INFORMATION
IN+
IN− OUT
+
−
MC33078DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER
SLLS633C – OCTOBER 2004 – REVISED NOVEMBER 2006
•Dual-Supply Operation . . . ±5 V to ±18 V•Low Noise Voltage . . . 4.5 nV/ √Hz•Low Input Offset Voltage . . . 0.15 mV•Low Total Harmonic Distortion . . . 0.002%•High Slew Rate . . . 7 V/ µs•High-Gain Bandwidth Product . . . 16 MHz•High Open-Loop AC Gain . . . 800 at 20 kHz•Large Output-Voltage Swing . . . 14.1 V to–14.6 V•Excellent Gain and Phase Margins
The MC33078 is a bipolar dual operational amplifier with high-performance specifications for use in quality audioand data-signal applications. This device operates over a wide range of single- and dual-supply voltages andoffers low noise, high-gain bandwidth, and high slew rate. Additional features include low total harmonicdistortion, excellent phase and gain margins, large output voltage swing with no deadband crossover distortion,and symmetrical sink/source performance.
ORDERING INFORMATION
T
A
PACKAGE
(1)
ORDERABLE PART NUMBER TOP-SIDE MARKING
(2)
PDIP – P Tube of 50 MC33078P MC33078PTube of 75 MC33078DSOIC – D M33078–40 °C to 85 °C Reel of 2500 MC33078DRReel of 2500 MC33078DGKRVSSOP/MSOP – DGK MY_Reel of 250 MC33078DGKT
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available atwww.ti.com/sc/package.
(2) DGK: The actual top-side marking has one additional character that designates the assembly/test site.
SYMBOL (EACH AMPLIFIER)
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2004–2006, Texas Instruments IncorporatedProducts conform to specifications per the terms of the TexasInstruments standard warranty. Production processing does notnecessarily include testing of all parameters.
www.ti.com
Absolute Maximum Ratings
(1)
Recommended Operating Conditions
MC33078
DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER
SLLS633C – OCTOBER 2004 – REVISED NOVEMBER 2006
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
CC+
Supply voltage
(2)
18 VV
CC–
Supply voltage
(2)
–18 VV
CC+
– V
CC–
Supply voltage 36 VInput voltage, either input
(2) (3)
V
CC+
or V
CC–
VInput current
(4)
±10 mADuration of output short circuit
(5)
UnlimitedD package 97θ
JA
Package thermal impedance, junction to free air
(6) (7)
DGK package 172 °C/WP package 85T
J
Operating virtual junction temperature 150 °CT
stg
Storage temperature range –65 150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratingsonly, and functional operation of the device at these or any other conditions beyond those indicated under Recommended OperatingConditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.(2) All voltage values, except differential voltages, are with respect to the midpoint between V
CC+
and V
CC–
.(3) The magnitude of the input voltage must never exceed the magnitude of the supply voltage.(4) Excessive input current will flow if a differential input voltage in excess of approximately 0.6 V is applied between the inputs, unlesssome limiting resistance is used.(5) The output may be shorted to ground or either power supply. Temperature and/or supply voltages must be limited to ensure themaximum dissipation rating is not exceeded.(6) Maximum power dissipation is a function of T
J
(max), θ
JA
, and T
A
. The maximum allowable power dissipation at any allowable ambienttemperature is P
D
= (T
J
(max) – T
A
)/ θ
JA
. Operating at the absolute maximum T
J
of 150 °C can affect reliability.(7) The package thermal impedance is calculated in accordance with JESD 51-7.
MIN MAX UNIT
V
CC–
–5 –18Supply voltage VV
CC+
5 18T
A
Operating free-air temperature range –40 85 °C
2
Submit Documentation Feedback
www.ti.com
Electrical Characteristics
Operating Characteristics
MC33078DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER
SLLS633C – OCTOBER 2004 – REVISED NOVEMBER 2006
V
CC–
= –15 V, V
CC+
= 15 V, T
A
= 25 °C (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
T
A
= 25 °C 0.15 2V
IO
Input offset voltage V
O
= 0, R
S
= 10 Ω, V
CM
= 0 mVT
A
= –40 °C to 85 °C 3Input offset voltageαV
IO
V
O
= 0, R
S
= 10 Ω, V
CM
= 0 T
A
= –40 °C to 85 °C 2 µV/ °Ctemperature coefficient
T
A
= 25 °C 300 750I
IB
Input bias current V
O
= 0, V
CM
= 0 nAT
A
= –40 °C to 85 °C 800T
A
= 25 °C 25 150I
IO
Input offset current V
O
= 0, V
CM
= 0 nAT
A
= –40 °C to 85 °C 175Common-mode input voltageV
ICR
∆V
IO
= 5 mV, V
O
= 0 ±13 ±14 Vrange
T
A
= 25 °C 90 110Large-signal differentialA
VD
R
L
≥2 k Ω, V
O
=±10 V dBvoltage amplification
T
A
= –40 °C to 85 °C 85V
OM+
10.7R
L
= 600 Ω
V
OM–
–11.9V
OM+
13.2 13.8V
OM
Maximum output voltage swing V
ID
=±1 V R
L
= 2k ΩVV
OM–
–13.2 –13.7V
OM+
13.5 14.1R
L
= 10k Ω
V
OM–
–14 –14.6CMMR Common-mode rejection ratio V
IN
=±13 V 80 100 dBk
SVR
(1)
Supply-voltage rejection ratio V
CC+
= 5 V to 15 V, V
CC–
= –5 V to –15 V 80 105 dBSource current 15 29I
OS
Output short-circuit current |V
ID
| = 1 V, Output to GND mASink current –20 –37T
A
= 25 °C 2.05 2.5I
CC
Supply current (per channel) V
O
= 0 mAT
A
= –40 °C to 85 °C 2.75
(1) Measured with V
CC ±
differentially varied at the same time
V
CC–
= –15 V, V
CC+
= 15 V, T
A
= 25 °C (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
SR Slew rate at unity gain A
VD
= 1, V
IN
= –10 V to 10 V, R
L
= 2 k Ω, C
L
= 100 pF 5 7 V/ µsGBW Gain bandwidth product f = 100 kHz 10 16 MHzB
1
Unity gain frequency Open loop 9 MHzC
L
= 0 pF –11G
m
Gain margin R
L
= 2 k ΩdBC
L
= 100 pF –6C
L
= 0 pF 55Φ
m
Phase margin R
L
= 2 k ΩdegC
L
= 100 pF 40Amp-to-amp isolation f = 20 Hz to 20 kHz –120 dBPower bandwidth V
O
= 27 V
(PP)
, R
L
= 2 k Ω, THD ≤1% 120 kHzTHD Total harmonic distortion V
O
= 3 V
rms
, A
VD
= 1, R
L
= 2 k Ω, f = 20 Hz to 20 kHz 0.002 %z
o
Open-loop output impedance V
O
= 0, f = 9 MHz 37 Ωr
id
Differential input resistance V
CM
= 0 175 k ΩC
id
Differential input capacitance V
CM
= 0 12 pFV
n
Equivalent input noise voltage f = 1 kHz, R
S
= 100 Ω4.5 nV/ √HzI
n
Equivalent input noise current f = 1 kHz 0.5 pA/ √Hz
3Submit Documentation Feedback
www.ti.com
D.U.T.
Voltage Gain = 50,000
Scope
x 1
RIN = 1.0 MΩ
+
−
100 kΩ
10 Ω
0.1 µF
100 kΩ
0.1 µF
24.3 kΩ
4.7 µF
2.0 kΩ
2.2 µF
22 µF
110 kΩ
4.3 kΩ
1/2
MC33078
NOTE: All capacitors are non-polarized.
MC33078
DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER
SLLS633C – OCTOBER 2004 – REVISED NOVEMBER 2006
Figure 1. Voltage Noise Test Circuit (0.1 Hz to 10 Hz)
4
Submit Documentation Feedback
www.ti.com
TYPICAL CHARACTERISTICS
0
100
200
300
400
500
600
5 6 7 8 9 10 11 12 13 14 15 16 17 18
VCC+/–VCC– – Supply Voltage – V
IIB – Input Bias Current – nA
VCM = 0 V
TA= 25°C
0
100
200
300
400
500
600
-15 -10 -5 0 5 10 15
VCM – Common Mode Voltage – V
IIB – Input Bias Current – nA
VCC+ = 15 V
VCC– = –15 V
TA= 25°C
0
100
200
300
400
500
600
700
800
900
1000
-55 -35 -15 5 25 45 65 85 105 125
TA– Temperature – °C
IIB – Input Bias Current – nA
VCC+ = 15 V
VCC– = –15 V
VCM = 0 V
-2
-1.5
-1
-0.5
0
0.5
1
1.5
2
-55 -35 -15 5 25 45 65 85 105 125
TA– Temperature – °C
VIO – Input Offset Voltage – mV
VCC+ = 15 V
VCC– = –15 V
VCM = 0 V
MC33078DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER
SLLS633C – OCTOBER 2004 – REVISED NOVEMBER 2006
INPUT BIAS CURRENT INPUT BIAS CURRENTvs vsCOMMON-MODE VOLTAGE SUPPLY VOLTAGE
INPUT BIAS CURRENT INPUT OFFSET VOLTAGEvs vsTEMPERATURE TEMPERATURE
5Submit Documentation Feedback
www.ti.com
0
0.2
0.4
0.6
0.8
1
1.2
1.4
-55 -25 5 35 65 95 125
TA– Temperature – °C
Input Common-Mode Voltage Low
Proximity to V CC– – V
VCC+ = 3 V to 15 V
VCC– = -3 V to -15 V
èVIO = 5 mV
VO= 0 V
D
-1.4
-1.2
-1
-0.8
-0.6
-0.4
-0.2
0
-55 -25 5 35 65 95 125
TA– Temperature – °C
Input Common-Mode Voltage High
Proximity to V CC+ – V
VCC+ = 3 V to 15 V
VCC– = -3 V to -15 V
VIO = 5 mV
VO= 0 V
D
0
1
2
3
4
5
6
7
8
9
10
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5
RL– Load Resistance – k@
Output Saturation Voltage
Proximity to V CC– – V
T = –55°C
A
T = 25°C
A
T = 125°C
A
kW
-10
-9
-8
-7
-6
-5
-4
-3
-2
-1
0
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5
RL– Load Resistance – kh
Output Saturation Voltage
Proximity to V CC+ – V
T = –55°C
A
T = 25°C
A
T = 125°C
A
kW
MC33078
DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER
SLLS633C – OCTOBER 2004 – REVISED NOVEMBER 2006
TYPICAL CHARACTERISTICS (continued)
INPUT COMMON-MODE VOLTAGE INPUT COMMON-MODE VOLTAGELOW PROXIMITY TO V
CC–
HIGH PROXIMITY TO V
CC+vs vsTEMPERATURE TEMPERATURE
OUTPUT SATURATION VOLTAGE PROXIMITY TO V
CC+
OUTPUT SATURATION VOLTAGE PROXIMITY TO V
CC–vs vsLOAD RESISTANCE LOAD RESISTANCE
6
Submit Documentation Feedback
www.ti.com
10
20
30
40
50
60
70
-55 -35 -15 5 25 45 65 85 105 125
TA– Temperature – °C
IOS – Output Short-Circuit Current – mA
VCC+ = 15 V
VCC– = –15 V
VID = 1 V
Sink
Source
0
1
2
3
4
5
6
7
8
9
10
-55 -35 -15 5 25 45 65 85 105 125
TA– Temperature – °C
ICC – Supply Current – mA
VCM = 0 V
RL= High Impedance
VO= 0 V
V = 15 V
CC±±
V = 10 V
CC±±
V = 5 V
CC±±
0
10
20
30
40
50
60
70
80
90
100
1.0E+02 1.0E+03 1.0E+04 1.0E+05 1.0E+06 1.0E+07
f – Frequency – Hz
CMMR – dB
100 1k 10k 100k 1M 10M
V = 15 V
V = –15 V
V = 0 V
V = 1.5 V
T = 25°C
CC+
CC–
CM
CM
A
D ±
0
10
20
30
40
50
60
70
80
90
100
110
120
1.0E+02 1.0E+03 1.0E+04 1.0E+05 1.0E+06 1.0E+07
f – Frequency – Hz
PSRR – dB
100 1k 10k 100k 1M 10M
V = 15 V
V = –15 V
T = 25°C
CC+
CC–
A
T3P
T3N
MC33078DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER
SLLS633C – OCTOBER 2004 – REVISED NOVEMBER 2006
TYPICAL CHARACTERISTICS (continued)
OUTPUT SHORT-CIRCUIT CURRENT SUPPLY CURRENTvs vsTEMPERATURE TEMPERATURE
CMRR PSSRvs vsFREQUENCY FREQUENCY
7Submit Documentation Feedback
www.ti.com
0
5
10
15
20
25
30
-55 -35 -15 5 25 45 65 85 105 125
TA– Temperature – °C
GBW – Gain Bandwidth Product – MHz
0
5
10
15
20
25
30
5 6 7 8 9 10 11 12 13 14 15 16 17 18
VCC+/–VCC– – Supply Voltage – V
GBW – Gaind Bandwidth Product – MHz
0
5
10
15
20
25
30
1.E+01 1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 1.E+07
f – Frequency – Hz
VO– Output Voltage – V
100 1k 10k 100k 1M 10M
10
V = 15 V
V = –15 V
R = 2 k
A = 1
THD < 1%
T = 25°C
CC+
CC–
L
V
A
W
-20
-15
-10
-5
0
5
10
15
20
5 6 7 8 9 10 11 12 13 14 15 16 17 18
VCC+/–VCC– – Supply Voltage – V
VO – Output Voltage – V
R = 10 k
LW
R = 2 k
LW
R = 10 k
LW
R = 2 k
LW
MC33078
DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER
SLLS633C – OCTOBER 2004 – REVISED NOVEMBER 2006
TYPICAL CHARACTERISTICS (continued)
GAIN BANDWIDTH PRODUCT GAIN BANDWIDTH PRODUCTvs vsSUPPLY VOLTAGE TEMPERATURE
OUTPUT VOLTAGE OUTPUT VOLTAGEvs vsSUPPLY VOLTAGE FREQUENCY
8
Submit Documentation Feedback
www.ti.com
80
85
90
95
100
105
110
5 6 7 8 9 10 11 12 13 14 15 16 17 18
VCC+/–VCC– – Supply Voltage – V
AV– Open-Loop Gain – dB
R = 2 k
f < 10 Hz
V = 2/3(V – V )
T = 25°C
L
O CC+ CC–
A
W
D
80
85
90
95
100
105
110
115
120
-55 -35 -15 5 25 45 65 85 105 125
TA– Temperature – °C
AV– Open-Loop Gain – dB
R = 2 k
f < 10 Hz
V = 2/3(V – V )
T = 25°C
L
O CC+ CC–
A
W
D
100
110
120
130
140
150
160
170
180
190
200
1.E+01 1.E+02 1.E+03 1.E+04 1.E+05
f – Frequency – Hz
Crosstalk Rejection – dB
1k 10k 100k
Drive Channel
V = 15 V
V = –15 V
R = 2 k
V = 20 V
T = 25°C
CC+
CC–
L
O PP
A
W
10 100
0
5
10
15
20
25
30
35
40
45
50
1.0E+03 1.0E+04 1.0E+05 1.0E+06 1.0E+07
f – Frequency – Hz
ZO– Output Impedance –
VCC+ = 15 V
VCC– = –15 V
VO= 1 Vrms
TA= 25°C
W
1k 10k 100k 1M 10M
A = 1
V
A = 10
V
A = 100
V
A = 1000
V
MC33078DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER
SLLS633C – OCTOBER 2004 – REVISED NOVEMBER 2006
TYPICAL CHARACTERISTICS (continued)
OPEN-LOOP GAIN OPEN-LOOP GAINvs vsSUPPLY VOLTAGE TEMPERATURE
OUTPUT IMPEDANCE CROSSTALK REJECTIONvs vsFREQUENCY FREQUENCY
9Submit Documentation Feedback
www.ti.com
0.0001
0.001
0.01
0.1
1
1.E+01 1.E+02 1.E+03 1.E+04 1.E+05
f – Frequency – Hz
THD – Total Harmonic Distortion – %
1k 10k 100k
V = 15 V
V = –15 V
V = 1 V
A = 1
R = 2 k
T = 25°C
CC+
CC–
O rms
V
L
A
W
10 100
0.0001
0.001
0.01
0.1
1
0 1 2 3 4 5 6 7 8 9
VO– Output Voltage – Vrms
THD – Total Harmonic Distortion – %
V = 15 V
V = –15 V
f = 2 kHz
R = 2 k
T = 25°C
CC+
CC–
L
A
W
A = 1
V
A = 10
V
A = 100
V
A = 1000
V
2
3
4
5
6
7
8
9
10
5 6 7 8 9 10 11 12 13 14 15 16 17 18
VCC+/–VCC– – Supply Voltage – V
SR – Slew Rate – V/µs
Falling Edge
Rising Edge
V = 2/3(V – V )
A = 1
R = 2 k
T = 25°C
D
W
IN CC+ CC–
V
L
A
2
3
4
5
6
7
8
9
10
-55 -35 -15 5 25 45 65 85 105 125
TA– Temperature – °C
SR – Slew Rate – V/µs
V = 15 V
V = –15 V
CC+
CC–
V = 20 V
A = 1
R = 2 k
D
W
IN
V
L
Falling Edge
Rising Edge
MC33078
DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER
SLLS633C – OCTOBER 2004 – REVISED NOVEMBER 2006
TYPICAL CHARACTERISTICS (continued)
TOTAL HARMONIC DISTORTION TOTAL HARMONIC DISTORTIONvs vsFREQUENCY OUTPUT VOLTAGE
SLEW RATE SLEW RATEvs vsSUPPLY VOLTAGE TEMPERATURE
10
Submit Documentation Feedback
www.ti.com
0
10
20
30
40
50
60
70
80
1.E+03 1.E+04 1.E+05 1.E+06 1.E+07
f – Frequency – Hz
Gain – dB
-180
-135
-90
-45
0
Phase Shift – deg
V = 15 V
V = –15 V
CC+
CC–
R = 2 k
T = 25°C
L
A
W
100k 1M 10M
1k 10k
Phase
Gain
0
3
6
9
12
1 10 100 1000
Cout – Output Load Capacitance – pF
Gain Margin – dB
0
10
20
30
40
50
60
70
80
Phase Margin – deg
Gain, T = 125°C
A
Gain, T = 25°C
A
Gain, T = –55°C
A
Phase, T = 125°C
A
Phase, T = 25°C
A
Phase, T = –55°C
A
V = 15 V
V = –15 V
CC+
CC–
V = 0 V
O
0
10
20
30
40
50
60
70
80
90
100
10 100 1000
Cout – Output Load Capacitance – pF
Overshoot – %
VCC+ = 15 V
VCC– = –15 V
VIN = 100 mVPP
T = 125°C
A
T = 25°C
A
T = –55°C
A
1
10
100
10 100 1000 10000 100000
f – Frequency – Hz
Input Voltage Noise – nV/rtHz
0.1
1
10
Input Current Noise – pA/rtHz
VCC+ = 15 V
VCC– = –15 V
TA= 25°C
Input Voltage Noise
Input Current Noise
10 100 1k 10k 100k
pA/ÖHz
nV/ÖHz
MC33078DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER
SLLS633C – OCTOBER 2004 – REVISED NOVEMBER 2006
TYPICAL CHARACTERISTICS (continued)
GAIN AND PHASE GAIN AND PHASE MARGINvs vsFREQUENCY OUTPUT LOAD CAPACITANCE
OVERSHOOT INPUT VOLTAGE AND CURRENT NOISEvs vsOUTPUT LOAD CAPACITANCE FREQUENCY
11Submit Documentation Feedback
www.ti.com
1
10
100
1000
1.E+01 1.E+02 1.E+03 1.E+04 1.E+05 1.E+06
RS– Source Resistance – è
Input Referred Noise Voltage – nV/rtHz
VCC+ = 15 V
VCC– = –15 V
f = 1 Hz
TA= 25°C
W
10 100 1k 10k 100k
nV/ÖHz
1M
0
2
4
6
8
10
12
14
16
0 1 10 10 0 10 0 0 10 0 0 0 10 0 0 0 0
RSD – Differential Source Resistance – è
Gain Margin – dB
0
4
8
12
16
2 0
2 4
2 8
3 2
3 6
4 0
4 4
4 8
5 2
5 6
6 0
6 4
Phase Margin – deg
VCC+ = 15 V
VCC– = –15 V
AV= 100
VO= 0 V
TA= 25°C
Phase Margin
Gain Margin
W
1k 10k 100k
1000 110
-15
-5
5
15
25
35
45
55
-2 2 6 10 14 18 22
Time – µs
VO– Output Voltage – V
-60
-50
-40
-30
-20
-10
0
10
VI– Input Voltage – V
V = 15 V
V = –15 V
A = 1
R = 2 k
C
T = 25°C
CC+
CC–
V
L
A
W
L= 100 pF
Input
Output
-15
-5
5
15
25
35
45
55
-2 2 6 10 14 18 22
Time – µs
VO– Output Voltage – V
-60
-50
-40
-30
-20
-10
0
10
VI– Input Voltage – V
V = 15 V
V = –15 V
A = –1
R = 2 k
C
T = 25°C
CC+
CC–
V
L
A
W
L= 100 pF
Input
Output
MC33078
DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER
SLLS633C – OCTOBER 2004 – REVISED NOVEMBER 2006
TYPICAL CHARACTERISTICS (continued)
INPUT REFERRED NOISE VOLTAGE GAIN AND PHASE MARGINvs vsSOURCE RESISTANCE DIFFERENTIAL SOURCE RESISTANCE
LARGE SIGNAL TRANSIENT RESPONSE LARGE SIGNAL TRANSIENT RESPONSE(A
V
= 1) (A
V
= –1)
12
Submit Documentation Feedback
www.ti.com
-0.2
-0.1
0
0.1
0.2
0.3
0.4
0.5
0.6
-0.5 0.0 0.5 1.0 1.5
Time – µs
VO– Output Voltage – V
-0.6
-0.5
-0.4
-0.3
-0.2
-0.1
0.0
0.1
0.2
VI– Input Voltage – V
V = 15 V
V = –15 V
A = 1
R = 2 k
C
T = 25°C
CC+
CC–
V
L
A
W
L= 100 pF
Input
Output
-500
-400
-300
-200
-100
0
100
200
300
400
-5 -4 -3 -2 -1 0 1 2 3 4 5
Time – s
Input Voltage Noise – nV
T3
VCC+ = 15 V
VCC– = –15 V
BW = 0.1 Hz to 10 Hz
TA= 25°C
MC33078DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER
SLLS633C – OCTOBER 2004 – REVISED NOVEMBER 2006
TYPICAL CHARACTERISTICS (continued)
SMALL SIGNAL TRANSIENT RESPONSE LOW_FREQUENCY NOISE
13Submit Documentation Feedback
www.ti.com
APPLICATION INFORMATION
Output Characteristics
0.25 V per Division
250 ns per Division
Maximum capacitance
before oscillation = 380 pF
250 ns per Division
0.25 V per Division
Maximum capacitance
before oscillation = 560 pF
250 ns per Division
0.25 V per Division
Maximum capacitance
before oscillation = 590 pF
250 ns per Division
0.25 V per Division
250 ns per Division
0.25 V per Division
250 ns per Division
0.25 V per Division
5V
–5V
15V
–15V
ROVO
R = 2 k
LΩ
CL
MC33078
DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER
SLLS633C – OCTOBER 2004 – REVISED NOVEMBER 2006
All operating characteristics are specified with 100-pF load capacitance. The MC33078 can drive highercapacitance loads. However, as the load capacitance increases, the resulting response pole occurs at lowerfrequencies, causing ringing, peaking, or oscillation. The value of the load capacitance at which oscillationoccurs varies from lot to lot. If an application appears to be sensitive to oscillation due to load capacitance,adding a small resistance in series with the load should alleviate the problem (see Figure 2 ).
PULSE RESPONSE PULSE RESPONSE PULSE RESPONSE(R
L
= 600 Ω, C
L
= 380 pF) (R
L
= 2 k Ω, C
L
= 560 pF) (R
L
= 10 k Ω, C
L
= 590 pF)
PULSE RESPONSE PULSE RESPONSE PULSE RESPONSE(R
O
= 0 Ω, C
O
= 1000 pF, R
L
= 2 k Ω) (R
O
= 4 Ω, C
O
= 1000 pF, R
L
= 2 k Ω) (R
O
= 35 Ω, C
O
= 1000 pF, R
L
= 2 k Ω)
Figure 2. Output Characteristics
14
Submit Documentation Feedback
PACKAGE OPTION ADDENDUM
www.ti.com 16-Aug-2012
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
MC33078D ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC33078DE4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC33078DG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC33078DGKR ACTIVE VSSOP DGK 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC33078DGKRG4 ACTIVE VSSOP DGK 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC33078DGKT ACTIVE VSSOP DGK 8 250 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC33078DGKTG4 ACTIVE VSSOP DGK 8 250 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC33078DR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC33078DRE4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC33078DRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
MC33078P ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
MC33078PE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
PACKAGE OPTION ADDENDUM
www.ti.com 16-Aug-2012
Addendum-Page 2
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF MC33078 :
•Enhanced Product: MC33078-EP
NOTE: Qualified Version Definitions:
•Enhanced Product - Supports Defense, Aerospace and Medical Applications
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
MC33078DGKR VSSOP DGK 8 2500 330.0 12.4 5.3 3.3 1.3 8.0 12.0 Q1
MC33078DGKT VSSOP DGK 8 250 180.0 12.4 5.3 3.3 1.3 8.0 12.0 Q1
MC33078DR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
MC33078DR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 16-Aug-2012
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
MC33078DGKR VSSOP DGK 8 2500 346.0 346.0 35.0
MC33078DGKT VSSOP DGK 8 250 220.0 205.0 50.0
MC33078DR SOIC D 8 2500 367.0 367.0 35.0
MC33078DR SOIC D 8 2500 340.5 338.1 20.6
PACKAGE MATERIALS INFORMATION
www.ti.com 16-Aug-2012
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All
semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time
of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated
