MC33078 DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER www.ti.com SLLS633C - OCTOBER 2004 - REVISED NOVEMBER 2006 FEATURES * * * * * * * * * D (SOIC), DGK (MSOP), OR P (PDIP) PACKAGE (TOP VIEW) Dual-Supply Operation . . . 5 V to 18 V Low Noise Voltage . . . 4.5 nV/Hz Low Input Offset Voltage . . . 0.15 mV Low Total Harmonic Distortion . . . 0.002% High Slew Rate . . . 7 V/s High-Gain Bandwidth Product . . . 16 MHz High Open-Loop AC Gain . . . 800 at 20 kHz Large Output-Voltage Swing . . . 14.1 V to -14.6 V Excellent Gain and Phase Margins OUT1 IN1- IN1+ VCC - 1 8 2 7 3 6 4 5 VCC+ OUT2 IN2- IN2+ DESCRIPTION/ORDERING INFORMATION The MC33078 is a bipolar dual operational amplifier with high-performance specifications for use in quality audio and data-signal applications. This device operates over a wide range of single- and dual-supply voltages and offers low noise, high-gain bandwidth, and high slew rate. Additional features include low total harmonic distortion, excellent phase and gain margins, large output voltage swing with no deadband crossover distortion, and symmetrical sink/source performance. ORDERING INFORMATION PACKAGE (1) TA PDIP - P -40C to 85C SOIC - D VSSOP/MSOP - DGK (1) (2) ORDERABLE PART NUMBER Tube of 50 MC33078P Tube of 75 MC33078D Reel of 2500 MC33078DR Reel of 2500 MC33078DGKR Reel of 250 MC33078DGKT TOP-SIDE MARKING (2) MC33078P M33078 MY_ Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. DGK: The actual top-side marking has one additional character that designates the assembly/test site. SYMBOL (EACH AMPLIFIER) IN+ + IN - - OUT Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2004-2006, Texas Instruments Incorporated MC33078 DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER www.ti.com SLLS633C - OCTOBER 2004 - REVISED NOVEMBER 2006 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN MAX UNIT VCC+ Supply voltage (2) 18 V VCC- Supply voltage (2) -18 V VCC+ - VCC- Supply voltage 36 V Input voltage, either input (2) (3) VCC+ or VCC- 10 Input current (4) Duration of output short circuit (5) Unlimited D package JA Package thermal impedance, junction to free air (6) (7) TJ Operating virtual junction temperature Tstg Storage temperature range 97 DGK package 172 P package (1) (2) (3) (4) (5) (6) (7) V mA C/W 85 -65 150 C 150 C Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC-. The magnitude of the input voltage must never exceed the magnitude of the supply voltage. Excessive input current will flow if a differential input voltage in excess of approximately 0.6 V is applied between the inputs, unless some limiting resistance is used. The output may be shorted to ground or either power supply. Temperature and/or supply voltages must be limited to ensure the maximum dissipation rating is not exceeded. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TA)/JA. Operating at the absolute maximum TJ of 150C can affect reliability. The package thermal impedance is calculated in accordance with JESD 51-7. Recommended Operating Conditions VCC- VCC+ TA 2 Supply voltage Operating free-air temperature range Submit Documentation Feedback MIN MAX -5 -18 5 18 -40 85 UNIT V C MC33078 DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER www.ti.com SLLS633C - OCTOBER 2004 - REVISED NOVEMBER 2006 Electrical Characteristics VCC- = -15 V, VCC+ = 15 V, TA = 25C (unless otherwise noted) PARAMETER TEST CONDITIONS VIO Input offset voltage VO = 0, RS = 10 , VCM = 0 VIO Input offset voltage temperature coefficient VO = 0, RS = 10 , VCM = 0 IIB Input bias current VO = 0, VCM = 0 IIO Input offset current VO = 0, VCM = 0 VICR Common-mode input voltage range VIO = 5 mV, VO = 0 AVD Large-signal differential voltage amplification RL 2 k, VO = 10 V Maximum output voltage swing VID = 1 V kSVR (1) 2 3 TA = -40C to 85C 300 RL = 2k 25 14 TA = 25C 90 110 TA = -40C to 85C 85 VOM+ 10.7 VOM- -11.9 VO = 0 nA V dB 13.8 VOM- -13.2 -13.7 VOM+ 13.5 14.1 VOM- -14 -14.6 80 100 dB 80 105 dB 15 29 -20 -37 VCC+ = 5 V to 15 V, VCC- = -5 V to -15 V Supply current (per channel) nA 13.2 Supply-voltage rejection ratio ICC mV VOM+ VIN = 13 V |VID| = 1 V, Output to GND 150 175 13 Common-mode rejection ratio Output short-circuit current 750 800 TA = -40C to 85C UNIT V/C 2 TA = 25C IOS (1) MAX 0.15 TA = -40C to 85C RL = 10k CMMR TYP TA = -40C to 85C TA = 25C RL = 600 VOM MIN TA = 25C Source current Sink current TA = 25C 2.05 TA = -40C to 85C V mA 2.5 2.75 mA Measured with VCC differentially varied at the same time Operating Characteristics VCC- = -15 V, VCC+ = 15 V, TA = 25C (unless otherwise noted) PARAMETER TEST CONDITIONS SR Slew rate at unity gain AVD = 1, VIN = -10 V to 10 V, RL = 2 k, CL = 100 pF GBW Gain bandwidth product f = 100 kHz B1 Unity gain frequency Open loop Gm Gain margin RL = 2 k m Phase margin RL = 2 k Amp-to-amp isolation f = 20 Hz to 20 kHz CL = 0 pF MIN TYP 5 7 V/s 10 16 MHz 9 MHz -11 CL = 100 pF -6 CL = 0 pF 55 CL = 100 pF 40 Power bandwidth VO = 27 V(PP), RL = 2 k, THD 1% THD Total harmonic distortion VO = 3 Vrms, AVD = 1, RL = 2 k, f = 20 Hz to 20 kHz zo Open-loop output impedance VO = 0, f = 9 MHz rid Differential input resistance Cid Differential input capacitance Vn In MAX UNIT dB deg -120 dB 120 kHz 0.002 % 37 VCM = 0 175 k VCM = 0 12 pF Equivalent input noise voltage f = 1 kHz, RS = 100 4.5 nV/Hz Equivalent input noise current f = 1 kHz 0.5 pA/Hz Submit Documentation Feedback 3 MC33078 DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER www.ti.com SLLS633C - OCTOBER 2004 - REVISED NOVEMBER 2006 0.1 F 10 100 k 2.0 k 4.3 k + D.U.T. 1/2 MC33078 Scope x1 RIN = 1.0 M - 4.7 F 100 k Voltage Gain = 50,000 2.2 F 24.3 k 110 k 0.1 F NOTE: All capacitors are non-polarized. Figure 1. Voltage Noise Test Circuit (0.1 Hz to 10 Hz) 4 22 F Submit Documentation Feedback MC33078 DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER www.ti.com SLLS633C - OCTOBER 2004 - REVISED NOVEMBER 2006 TYPICAL CHARACTERISTICS INPUT BIAS CURRENT vs COMMON-MODE VOLTAGE INPUT BIAS CURRENT vs SUPPLY VOLTAGE 600 600 VCM = 0 V VCC+ = 15 V VCC- = -15 V TA = 25C 400 300 200 100 0 -15 TA = 25C 500 IIB - Input Bias Current - nA IIB - Input Bias Current - nA 500 400 300 200 100 0 -10 -5 0 5 10 5 15 7 8 9 10 11 12 13 14 15 16 17 18 VCC+/-VCC- - Supply Voltage - V VCM - Common Mode Voltage - V INPUT BIAS CURRENT vs TEMPERATURE INPUT OFFSET VOLTAGE vs TEMPERATURE 1000 2 VCC+ = 15 V 900 VCC- = -15 V 800 VCM = 0 V VCC+ = 15 V 1.5 VIO - Input Offset Voltage - mV IIB - Input Bias Current - nA 6 700 600 500 400 300 200 VCM = 0 V 1 0.5 0 -0.5 -1 -1.5 100 0 -55 -35 -15 VCC- = -15 V 5 25 45 65 85 105 125 -2 -55 -35 -15 TA - Temperature - C 5 25 45 65 85 105 125 TA - Temperature - C Submit Documentation Feedback 5 MC33078 DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER www.ti.com SLLS633C - OCTOBER 2004 - REVISED NOVEMBER 2006 TYPICAL CHARACTERISTICS (continued) INPUT COMMON-MODE VOLTAGE LOW PROXIMITY TO VCC- vs TEMPERATURE INPUT COMMON-MODE VOLTAGE HIGH PROXIMITY TO VCC+ vs TEMPERATURE 1.4 0 Input Common-Mode Voltage High Proximity to V CC+ - V Input Common-Mode Voltage Low Proximity to V CC- - V VCC+ = 3 V to 15 V 1.2 1 0.8 0.6 VCC+ = 3 V to 15 V 0.4 VCC- = -3 V to -15 V D e VIO = 5 mV 0.2 VO = 0 V 0 -55 -25 5 35 65 95 -0.2 VCC- = -3 V to -15 V D VIO = 5 mV -0.4 VO = 0 V -0.6 -0.8 -1 -1.2 -1.4 -55 125 -25 TA - Temperature - C 65 95 125 OUTPUT SATURATION VOLTAGE PROXIMITY TO VCC- vs LOAD RESISTANCE 10 0 9 -1 TA = 125C -2 8 TA = 25C -3 Output Saturation Voltage Proximity to V CC- - V Output Saturation Voltage Proximity to V CC+ - V 35 TA - Temperature - C OUTPUT SATURATION VOLTAGE PROXIMITY TO VCC+ vs LOAD RESISTANCE TA = -55C -4 -5 -6 -7 -8 -9 7 6 5 TA = 125C 4 TA = 25C 3 TA = -55C 2 1 -10 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 0 kW RL - Load Resistance - kh 6 5 Submit Documentation Feedback 0.5 1 1.5 2 2.5 3 3.5 kW RL - Load Resistance - k@ 4 4.5 MC33078 DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER www.ti.com SLLS633C - OCTOBER 2004 - REVISED NOVEMBER 2006 TYPICAL CHARACTERISTICS (continued) OUTPUT SHORT-CIRCUIT CURRENT vs TEMPERATURE SUPPLY CURRENT vs TEMPERATURE 70 10 60 VCC- = -15 V 9 VID = 1 V 8 50 40 Source Sink 30 20 ICC - Supply Current - mA IOS - Output Short-Circuit Current - mA VCC+ = 15 V VCM = 0 V RL = High Impedance VO = 0 V 7 6 VCC = 15 V 5 4 3 VCC = 10 V VCC = 5 V 2 1 10 -55 -35 -15 5 25 45 65 85 0 -55 105 125 TA - Temperature - C 90 80 5 25 45 65 85 105 125 PSSR vs FREQUENCY 120 VCC+ = 15 V VCC- = -15 V VCM = 0 V DVCM = 1.5 V TA = 25C VCC+ = 15 V VCC- = -15 V TA = 25C 110 100 90 80 60 PSRR - dB CMMR - dB 70 -15 TA - Temperature - C CMRR vs FREQUENCY 100 -35 50 40 70 T3P 60 50 T3N 40 30 30 20 20 10 10 0 100 10k 100k 1.0E+06 10M 1k 1M 1.0E+02 1.0E+03 1.0E+04 1.0E+05 1.0E+07 0 1.0E+02 1.0E+03 1.0E+04 1.0E+05 1.0E+07 100 10k 100k 1.0E+06 10M 1k 1M f - Frequency - Hz f - Frequency - Hz Submit Documentation Feedback 7 MC33078 DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER www.ti.com SLLS633C - OCTOBER 2004 - REVISED NOVEMBER 2006 TYPICAL CHARACTERISTICS (continued) GAIN BANDWIDTH PRODUCT vs SUPPLY VOLTAGE GAIN BANDWIDTH PRODUCT vs TEMPERATURE 30 GBW - Gain Bandwidth Product - MHz GBW - Gaind Bandwidth Product - MHz 30 25 20 15 10 5 6 7 8 20 15 10 5 0 -55 0 5 25 9 10 11 12 13 14 15 16 17 18 -35 -15 5 25 45 65 OUTPUT VOLTAGE vs SUPPLY VOLTAGE 30 VCC+ = 15 V VCC- = -15 V RL = 2 k W AV = 1 THD < 1% TA = 25C 15 25 VO - Output Voltage - V VO - Output Voltage - V RL = 10 kW 10 RL = 2 k W 5 0 -5 RL = 10 kW -10 RL = 2 kW -20 8 20 15 10 5 -15 7 9 10 11 12 13 14 15 16 17 18 0 100 10 10k 100k 1.E+06 10M 1k 1M 1.E+01 1.E+02 1.E+03 1.E+04 1.E+05 1.E+07 VCC+/-VCC- - Supply Voltage - V 8 125 OUTPUT VOLTAGE vs FREQUENCY 20 6 105 TA - Temperature - C VCC+/-VCC- - Supply Voltage - V 5 85 Submit Documentation Feedback f - Frequency - Hz MC33078 DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER www.ti.com SLLS633C - OCTOBER 2004 - REVISED NOVEMBER 2006 TYPICAL CHARACTERISTICS (continued) OPEN-LOOP GAIN vs SUPPLY VOLTAGE OPEN-LOOP GAIN vs TEMPERATURE 120 110 115 AV - Open-Loop Gain - dB AV - Open-Loop Gain - dB 105 100 95 90 RL = 2 kW f < 10 Hz DVO = 2/3(VCC+ - VCC-) TA = 25C 85 6 7 8 105 100 95 90 85 80 5 110 RL = 2 k W f < 10 Hz DVO = 2/3(VCC+ - VCC-) TA = 25C 80 -55 9 10 11 12 13 14 15 16 17 18 VCC+/-VCC- - Supply Voltage - V 200 VO = 1 Vrms 35 190 180 Crosstalk Rejection - dB ZO - Output Impedance - W VCC+ = 15 V VCC- = -15 V TA = 25C 30 25 20 15 AV = 1000 10 45 65 85 105 125 170 Drive Channel VCC+ = 15 V VCC- = -15 V RL = 2 kW VO = 20 VPP TA = 25C 160 150 140 130 120 AV = 100 AV = 10 AV = 1 110 5 0 1.0E+03 1k 25 CROSSTALK REJECTION vs FREQUENCY 50 40 5 TA - Temperature - C OUTPUT IMPEDANCE vs FREQUENCY 45 -35 -15 100 1.E+01 10 1.0E+04 10k 1.0E+05 100k 1.0E+06 1M 1.0E+07 10M 1.E+02 100 1.E+03 1k 1.E+04 10k 1.E+05 100k f - Frequency - Hz f - Frequency - Hz Submit Documentation Feedback 9 MC33078 DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER www.ti.com SLLS633C - OCTOBER 2004 - REVISED NOVEMBER 2006 TYPICAL CHARACTERISTICS (continued) TOTAL HARMONIC DISTORTION vs FREQUENCY TOTAL HARMONIC DISTORTION vs OUTPUT VOLTAGE 0.1 1 VCC+ = 15 V VCC- = -15 V VO = 1 Vrms AV = 1 RL = 2 kW TA = 25C THD - Total Harmonic Distortion - % THD - Total Harmonic Distortion - % 1 0.01 0.001 0.0001 10 1.E+01 AV = 1000 0.1 AV = 100 0.01 AV = 10 0.001 VCC+ = 15 V VCC- = -15 V f = 2 kHz RL = 2 kW TA = 25C AV = 1 0.0001 100 1.E+02 1k 1.E+03 10k 1.E+04 0 100k 1.E+05 1 2 f - Frequency - Hz 10 10 9 9 Falling Edge 8 7 Rising Edge 6 5 4 DV = 2/3(V - V ) IN CC+ CC- AV = 1 3 RL = 2 kW TA = 25C 2 5 6 7 8 9 10 11 12 13 14 15 16 17 18 SR - Slew Rate - V/s SR - Slew Rate - V/s 5 6 7 8 9 105 125 SLEW RATE vs TEMPERATURE Falling Edge 7 Rising Edge 6 5 4 3 VCC+ = 15 V VCC- = -15 V DVIN = 20 V AV = 1 RL = 2 kW 2 -55 VCC+/-VCC- - Supply Voltage - V 10 4 VO - Output Voltage - Vrms SLEW RATE vs SUPPLY VOLTAGE 8 3 Submit Documentation Feedback -35 -15 5 25 45 65 TA - Temperature - C 85 MC33078 DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER www.ti.com SLLS633C - OCTOBER 2004 - REVISED NOVEMBER 2006 TYPICAL CHARACTERISTICS (continued) GAIN AND PHASE vs FREQUENCY 12 70 Gain, TA = 25C -90 40 30 20 10 1.E+04 10k 20 Gain, TA = -55C 40 Phase, TA = 125C 50 70 Phase, TA = -55C 1.E+05 100k 1.E+06 1M 0 -180 1.E+07 10M 1 10 80 1000 100 Cout - Output Load Capacitance - pF OVERSHOOT vs OUTPUT LOAD CAPACITANCE INPUT VOLTAGE AND CURRENT NOISE vs FREQUENCY 100 100 80 10 VCC+ = 15 V VCC+ = 15 V VCC- = -15 V VCC- = -15 V VIN = 100 mVPP TA = 25C nV/OHz Input Voltage Noise - nV/rtHz 90 70 Overshoot - % 60 Phase, TA = 25C f - Frequency - Hz 60 50 40 TA = 125C 30 20 30 6 3 -135 VCC+ = 15 V VCC- = -15 V RL = 2 k W TA = 25C 0 1.E+03 1k Gain Margin - dB Gain - dB Phase Shift - deg Gain 50 10 9 -45 60 0 VCC+ = 15 V VCC- = -15 V VO = 0 V Gain, TA = 125C Phase Margin - deg 0 Phase TA = 25C 10 1 Input Voltage Noise Input Current Noise pA/OHz Input Current Noise - pA/rtHz 80 GAIN AND PHASE MARGIN vs OUTPUT LOAD CAPACITANCE 10 TA = -55C 0 1 10 100 1000 10 Cout - Output Load Capacitance - pF Submit Documentation Feedback 100 1k 1000 10k 10000 0.1 100k 100000 f - Frequency - Hz 11 MC33078 DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER www.ti.com SLLS633C - OCTOBER 2004 - REVISED NOVEMBER 2006 TYPICAL CHARACTERISTICS (continued) INPUT REFERRED NOISE VOLTAGE vs SOURCE RESISTANCE GAIN AND PHASE MARGIN vs DIFFERENTIAL SOURCE RESISTANCE 1000 16 64 60 VCC- = -15 V f = 1 Hz TA = 25C 14 56 52 12 100 10 44 10 40 Gain Margin 36 8 32 28 6 4 2 VCC+ = 15 V 24 VCC- = -15 V 20 AV = 100 16 VO = 0 V 12 TA = 25C 8 Phase Margin - deg 48 Phase Margin Gain Margin - dB nV/OHz Input Referred Noise Voltage - nV/rtHz VCC+ = 15 V 4 0 1.E+02 100 1.E+03 1k 1.E+04 10k 1.E+05 100k 1.E+06 1M 1 00 e RS - Source Resistance - W 55 45 0 45 -10 35 VCC+ = 15 V VCC- = -15 V AV = 1 RL = 2 k W CL = 100 pF TA = 25C -20 -30 5 -40 -5 -15 -2 2 6 10 14 18 22 VO - Output Voltage - V 10 VI - Input Voltage - V VO - Output Voltage - V Input Output 0 1010k 0 0 0 10100k 0000 Input 10 0 35 15 -10 VCC+ = 15 V VCC- = -15 V AV = -1 RL = 2 k W CL = 100 pF TA = 25C 25 Output -20 -30 5 -40 -50 -5 -50 -60 -15 -60 -2 Time - s 12 101k 00 LARGE SIGNAL TRANSIENT RESPONSE (AV = -1) 55 15 100 10 0 RSD - Differential Source Resistance - W e LARGE SIGNAL TRANSIENT RESPONSE (AV = 1) 25 10 10 2 6 10 Time - s Submit Documentation Feedback 14 18 22 VI - Input Voltage - V 1 1.E+01 10 MC33078 DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER www.ti.com SLLS633C - OCTOBER 2004 - REVISED NOVEMBER 2006 TYPICAL CHARACTERISTICS (continued) LOW_FREQUENCY NOISE 0.6 0.2 400 0.5 0.1 300 0.4 0.0 -0.1 VCC+ = 15 V VCC- = -15 V AV = 1 RL = 2 k W CL = 100 pF TA = 25C 0.2 0.1 -0.2 -0.3 -0.4 0 Input Voltage Noise - nV Input 0.3 200 VI - Input Voltage - V VO - Output Voltage - V SMALL SIGNAL TRANSIENT RESPONSE 100 0 -100 -200 T3 VCC+ = 15 V -300 VCC- = -15 V BW = 0.1 Hz to 10 Hz TA = 25C Output -0.1 -0.2 -0.5 0.0 0.5 1.0 1.5 -0.5 -400 -0.6 -500 -5 Time - s -4 -3 -2 -1 0 1 2 3 4 5 Time - s Submit Documentation Feedback 13 MC33078 DUAL HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIER www.ti.com SLLS633C - OCTOBER 2004 - REVISED NOVEMBER 2006 APPLICATION INFORMATION Output Characteristics All operating characteristics are specified with 100-pF load capacitance. The MC33078 can drive higher capacitance loads. However, as the load capacitance increases, the resulting response pole occurs at lower frequencies, causing ringing, peaking, or oscillation. The value of the load capacitance at which oscillation occurs varies from lot to lot. If an application appears to be sensitive to oscillation due to load capacitance, adding a small resistance in series with the load should alleviate the problem (see Figure 2). PULSE RESPONSE (RL = 600 , CL = 380 pF) PULSE RESPONSE (RL = 2 k, CL = 560 pF) Maximum capacitance before oscillation = 380 pF PULSE RESPONSE (RL = 10 k, CL = 590 pF) Maximum capacitance before oscillation = 590 pF 0.25 V per Division 0.25 V per Division 0.25 V per Division Maximum capacitance before oscillation = 560 pF 250 ns per Division 250 ns per Division 250 ns per Division 0.25 V per Division PULSE RESPONSE (RO = 35 , CO = 1000 pF, RL = 2 k) 0.25 V per Division PULSE RESPONSE (RO = 4 , CO = 1000 pF, RL = 2 k) 0.25 V per Division PULSE RESPONSE (RO = 0 , CO = 1000 pF, RL = 2 k) 250 ns per Division 250 ns per Division 250 ns per Division 15 V RO VO 5V -5 V -15 V CL Figure 2. Output Characteristics 14 Submit Documentation Feedback RL = 2 k PACKAGE OPTION ADDENDUM www.ti.com 16-Aug-2012 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp MC33078D ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC33078DE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC33078DG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC33078DGKR ACTIVE VSSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC33078DGKRG4 ACTIVE VSSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC33078DGKT ACTIVE VSSOP DGK 8 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC33078DGKTG4 ACTIVE VSSOP DGK 8 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC33078DR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC33078DRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC33078DRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC33078P ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type MC33078PE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type (3) Samples (Requires Login) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 16-Aug-2012 Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF MC33078 : * Enhanced Product: MC33078-EP NOTE: Qualified Version Definitions: * Enhanced Product - Supports Defense, Aerospace and Medical Applications Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 16-Aug-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing MC33078DGKR VSSOP DGK 8 MC33078DGKT VSSOP DGK MC33078DR SOIC D MC33078DR SOIC D SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 2500 330.0 12.4 5.3 3.3 1.3 8.0 12.0 Q1 8 250 180.0 12.4 5.3 3.3 1.3 8.0 12.0 Q1 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 16-Aug-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) MC33078DGKR VSSOP DGK 8 2500 346.0 346.0 35.0 MC33078DGKT VSSOP DGK 8 250 220.0 205.0 50.0 MC33078DR SOIC D 8 2500 367.0 367.0 35.0 MC33078DR SOIC D 8 2500 340.5 338.1 20.6 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated