REVISIONS PART NO. ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE APPRVD DATE - A RELEASED Ramya 06/9/07 Suresh 06/9/07 G. C 21/9/07 13-30 DGN Specifications: Bodies : Brass per JIS-C3604. Centre Contact : Brass per JIS-C3604. Connector interface per MIL-STD-348A. Part to be clean and free of burrs. Dimensions : Millimetres (Inches) Specification Table Number Description Material Finish Part Number 1 Shell Zinc Nickel 100" Minimum 2 Insulation POM 3 Gasket Rubber 4 Spring Washer SK-5 5 Washer 6 Body 7 Centre Contact Gold 8 Washer Nickel 100" Minimum None 13-30 DGN Nickel 100" Minimum http://www.farnell.com Brass This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC MULTICOMP is the registered trademark of the Group. (c) Premier Farnell plc 2007. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. http://www.newark.com http://www.cpc.co.uk DRAWING TITLE: DRAWN BY: Ramya DATE: 06/09/07 CHECKED BY: DATE: 06/09/07 SIZE DATE: 21/09/07 SCALE: NTS Suresh APPROVED BY: G.Cook A DWG NO. 13-30 DGN M10000586 U.O.M.: mm (Inches) REV ELECTRONIC FILE A 1169740_DWG SHEET: 1 OF 1