www.Amprobe.com PRM-6 Phase Sequence and Motor Rotation Tester Don't second guess three-phase systems If you install or connect 3-phase motors and systems, you recognize the importance of verifying the correct motor rotation and wiring phase sequence. Improper connections can cause motors to rotate in reverse direction, potentially damaging the motor and the equipment it is powering. The PRM-6 Phase Sequence and Motor Rotation Tester can test the motor rotation of 3-phase systems and verify 3-phase receptacle wiring and phase sequencing with test leads. An additional advanced feature is wireless motor rotation detection, which senses motor rotation direction without use of test leads. This is particularly useful for fast-running motors when the motor rotation cannot be visually determined or when the drive shaft is not visible. Durably constructed with a rubber outer casing, the PRM-6 has a bright, backlight LCD display, CAT IV 600 V rating, and conforms to EN 61010 and EN 61557 standards, making it an essential tool for motor rotation and phase sequence testing in commercial and industrial environments on electrical systems up to 700 V. PRM-6 Features * 3-phase wire sequence indication * Synchronous or asynchronous motor rotation direction Input terminals L1 (A), L2 (B), L3 (C) * Error displays (missing phase, one input connected to neutral or PE) * Non-contact, wireless motor rotation detection on running motors * Indicates motor rotation of disconnected motors when spinning the shaft by hand or other means * 3-phase to phase voltage up to 700 V Non-contact motor orientation symbol and sensor indicator Symbol for L1, L2, L3 inputs Warning symbol for error condition Symbol for left/counterclockwise motor rotation Symbol for right/clockwise motor rotation ON symbol indicates when "ON" button depressed and held ON button / backlight * Clear backlit LCD display with easy to read symbols * Durable, rubber casing for 3 ft. (1 m) drop-proof protection * Low battery warning * Safety: CAT IV 600 V Amprobe(R) | info@amprobe.com | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623) PRM-6 Motor and Phase Rotation Tester (c)2015 Amprobe(R) For detailed specifications and ordering go to www.Amprobe.com 6005288 A www.Amprobe.com PRM-6 Applications * Indicates the phase rotation in 3-phase systems for both power sources and motors. * Identifies faulty 3-phase wiring with de-energized phases or incorrectly wired receptacles. * Indicates motor rotation in disconnected motors using test leads and by spinning the shaft by hand or other means. * Tests for rotation direction on a running motor with the built-in noncontact, wireless sensor - specifically important for fast running motors or motors where the shaft is not visible. PRM-6 Detailed Specifications Feature PRM-6 3-Phase indication and open-phase check LCD Voltage range (frequency): 40 - 700 V (16 - 60 Hz) 50 - 700 V (60 - 400 Hz) Nominal test current: < 3.5 mA Phase rotation detection Non-contact, wireless motor rotation detection De-energized motor rotation test Frequency range: 16 - 400 Hz Voltage range: 1 V - 700 V Frequency range: 2 - 400 Hz General specifications Operating temperature 0C to 40C (32F to 104F) Operating altitude Up to 2000 m Power Dimensions (L x W x H) AAA battery (2) 5.43 in (13.7 cm) x 2.56 in (6.5 cm) x 1.3 in (3.3 cm) Weight Electrical safety 0.38 lb (0.17 kg) EN 61010-1, EN 61010-031, EN 61557-1 EN 61557-7, conforms to EN 61326-1 Safety rating CAT IV 600V Accessories Included: 3 test leads, 3 test probes, 3 alligator clips, user manual, carrying bag, 2 AAA batteries. Agency approval Amprobe(R) info@amprobe.com Fluke Corporation, Everett, WA 98203 Tel: 877-AMPROBE (267-7623) For complete information about Amprobe test tools, visitWA www.Amprobe.com | Specifications subject to change Printed In U.S.A. 6005288 (R) (R) Amprobe | info@amprobe.com | Fluke Corporation, Everett, 98203 | Tel: 877-AMPROBE (267-7623) (c) 2015 Amprobe (c)2015 Amprobe For detailed specifications andwithout orderingnotice. go to www.Amprobe.com 6005288AA