3MTM MetPakTM 2-FB Power Socket 2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail * * * * * MP2 Series 6.50 Amps per contact End-to-end stackable Press or heat stake peg (solder tail) Futurebus+(R) compatible See the Regulatory Information Appendix (RIA) in the "RoHS compliance" section of www.3M.com/ interconnects for compliance information (RIA E1 & C1 apply) Date Modified: August 21, 2009 TS-1125-B Sheet 1 of 4 Physical Insulation: Material: High Temperature LCP Flammability: UL 94V-0 Color: Beige Contact: Material: Copper Alloy Plating: Underplating: 50 " [1.27 m] Nickel Wiping Area: See Ordering Information Tails: See Ordering Information Electrical Current Rating: Power: 6.50 A per power socket contact at 70C Insulation Resistance: 103 M Withstanding Voltage: 1,500 VAC for 60 seconds Environmental Temperature Rating: -55 C to 125 C Process Temperature Rating: 260C (Profile per J-STD-020C) Moisture Sensitivity Level: 1 (per J-STD-020C) UL File No.: E68080 MetPak is a trademark of 3M Company. Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. (IEEE) 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM MetPakTM 2-FB Power Socket 2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail 11.95 .470 MP2 Series 12.45 .490 11.80 .465 21.00 .827 9.30 .366 3.00 .118 "A" TAIL LENGTH 13.50 .531 2.00 .079 TYP. POSITION 2 POSITION 1 "B" 6.00 .236 2.00 .079 5X 10.00 .394 9.50 .374 4 ROW PRODUCT FOR SPECIAL MONOBLOCKS CONTACT 3M SALES REPRESENTATIVE mm (Inch) Tolerance Unless Noted mm 0 3 0.0 0.3 0.00 0.13 ( ) Dimensions used for Reference Only 12.45 .490 ROW E D C B A 13.80 .543 23.00 .906 11.30 .445 5 ROW PRODUCT 8.00 .315 Note: 1. Refer to IEC 61076-4-104 Futurebus+(R) global standard. 2. "Press Fit" describes a contact tail having a compliant section designed to make a reliable electrical connection with a plated through-hole (PTH) in a printed circuit board, typically a "back plane." Ordering Information MP2-SPXX-X1XX- XXXXX SP = Power Socket Plating Options: (See Table 3) Contact Count (See Table 1) Rows 4 = 4 Rows 5 = 5 Rows Tail Length (See Table 2) Termination Style P = Press-Fit M = Solder Tail (Press Peg) S = Solder Tail (Heat Stake) 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects TS-1125-B Sheet 2 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM MetPakTM 2-FB Power Socket 2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail MP2 Series Table 1 Pin Count No of Rows 08 4 10 5 Table 2 - Tail & Post Lengths Contact-to-PC Board Tail Termination Option No. Dim. "A" Dim. "B" S1 2.72 [0.107] 5.20 [0.205] S2 3.53 [0.139] 6.00 [0.236] M1 2.72 [0.107] 3.57 [0.141] 3.53 [0.139] 3.57 [0.141] Solder M2 Press-Fit* P1 *Compliant-Pin Tail Table 3 - Plating Plating Suffix Press-Fit Tails* Solder Tails Plating Composition TG (RIA E2 & C2 apply) RIA E3 & C2 apply 0.25 m [10 "] Min. Au Contact Area 2.54 m [100 "] Min. SnPb Tail Area 1.27 m [50 "] Min. Ni all over TG30 (RIA E2 & C2 apply) RIA E3 & C2 apply 0.76 m [30 "] Min. Au Contact Area 2.54 m [100 "] Min. SnPb Tail Area 1.27 m [50 "] Min. Ni all over TR30 (RIA E2 & C2 apply) RIA E3 & C2 apply 0.08 m [3 "] Min. Au Contact Area 0.67 m [27 "] Min. PdNi Contact Area 2.54 m [100 "] Min. SnPb Tail Area 1.27 m [50 "] Min. Ni all over TR40B (RIA E2 & C2 apply) RIA E3 & C2 apply 0.13 m [5 "] Min. Hard Au Contact Area, Lubricated 1.02 m [40 "] Min. PdNi Contact Area 0.10 m [4 "] Min. Pd Contact Area 2.54 m [100 "] Min. SnPb Tail Area 1.27 m [50 "] Min. Ni all over FJ RIA E1 & C1 apply RIA E1 & C1 apply 0.25 m [10 "] Min. Au Contact Area 5.08 m [200 "] Min. Matt Whisker Mitigating Sn Tail Area 1.27 m [50 "] Min. Ni all over KR RIA E1 & C1 apply RIA E1 & C1 apply 0.76 m [30 "] Min. Au Contact Area 5.08 m [200 "] Min. Matt Whisker Mitigating Sn Tail Area 1.27 m [50 "] Min. Ni all over RF RIA E1 & C1 apply RIA E1 & C1 apply 1.27 m [50 "] Min. Au Contact Area, Lubricated 5.08 m [200 "] Min. Matt Whisker Mitigating Sn Tail Area 1.27 m [50 "] Min. Ni all over LR RIA E1 & C1 apply RIA E1 & C1 apply 0.08 m [3 "] Min. Au Contact Area 0.67 m [27 "] Min. PdNi Contact Area 5.08 m [200 "] Min. Matt Whisker Mitigating Sn Tail Area 1.27 m [50 "] Min. Ni all over RIA E1 & C1 apply 0.13 m [5 "] Min. Hard Au Contact Area, Lubricated 1.02 m [40 "] Min. PdNi Contact Area 0.10 m [4 "] Min. Pd Contact Area 5.08 m [200 "] Min. Matt Whisker Mitigating Sn Tail Area 1.27 m [50 "] Min. Ni all over PD RIA E1 & C1 apply *Compliant-Pin Tail TS-1125-B Sheet 3 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM MetPakTM 2-FB Power Socket 2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail 2.00 .079 MP2 Series 6.00 .236 3X 4.00 .157 2.00 .079 TYP. 1.00 .039 A1 4.00 .157 "B" 2.05 +.05 -.00 O 0.10 .081 +.002 -.000 UNPLATED THRU HOLE UNPLATED THROUGH-HOLE O O "D" PLATED THROUGH-HOLE 3.00 .118 O 0.10 1.50 .059 +.10 -.00 +.004 -.000 O 0.10 UNPLATED THROUGH-HOLE Recommended 4 Row PCB Hole Mounting Pattern 2.00 .079 4X 8.00 .315 Recommended 5 Row PCB Hole Mounting Pattern Table 4 -- HOLE PLATING for TG, TG30, TR30, TR40B FINISHES ONLY HOLE Finished Dia. mm [in] Cu Thickness mm [in] SnPb Thickness microns ["] Drilled Hole Dia. mm [in] "D" 0.65-0.80 [.0256-.0315] 0.025 [.001] min 15 [600] max 0.81-0.86 [.0319-.0339] Table 5 -- HOLE PLATING for FJ, KR, RF, LR and PD FINISHES ONLY HOLE Finished Dia. mm [in] Cu Thickness mm [in] Immersion Matte Sn Thickness microns ["] Electrolitic Au Thickness microns ["] OSP ENTEK Thickness microns ["] Drilled Hole Dia. mm [in] "D" 0.700-0.800 [.0276-.0315] 0.025-0.045 [0.001-0.002] 0.5 - 2.5 [20 - 100] 0.1 - 0.5 [4 - 20] 0.2 - 0.5 [8 - 20] 0.830-0.860 [.0330-.0340] or 0.85mm [ #66] TWIST DRILL TS-1125-B Sheet 4 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3m.com/interconnects Please recycle. Printed in USA. (c) 3M 2008. All rights reserved. RIA-2217B-E 3M is a trademark of 3M Company.