VWO 80 VWO 95 Three Phase AC Controller Modules IRMS = 80/95 A VRRM = 1200/1400 V Preliminary data 7 1 VRSM VDSM VRRM VDRM V V 1200 1400 1200 1400 14 1 Type 16 2 8 2 17 3 3 9 14 16 17 10 11 VWO 80-12io7 VWO 95-12io7 VWO 80-14io7 VWO 95-14io7 7 10 8 11 9 13 t 13 Symbol Conditions IRMS ITRMS ITAVM TC = 85C, 50 - 400 Hz (per phase) TVJ = TVJM TC = 85C; (180 sine) ITSM TVJ = 45C; VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1000 1100 1150 1230 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 900 1000 1000 1100 A A TVJ = 45C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 5000 5080 6600 6280 A2s A2s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 5000 5080 A2s A2s PGM TVJ = TVJM IT = ITAVM p TVJ = TVJM; VDR = 2/3 VDRM RGK = ; method 1 (linear voltage rise) u A A A -o TVJ = TVJM repetitive, IT = 150 A f =50 Hz, tP =200 s VD = 2/3 VDRM IG = 0.3 A non repetitive, IT = ITAVM diG/dt = 0.3 A/s (dv/dt)cr 96 69 44 e s 4050 4200 a (di/dt)cr 82 59 37 h I2t Maximum Ratings VWO 95 VWO 80 tP = 30 s tP = 300 s 100 A/s 500 A/s 1000 V/s PGAVM 10 5 0.5 W W W VRGM 10 V TVJ TVJM Tstg -40...+125 125 -40...+125 C C C 2500 3000 V~ V~ VISOL 50/60 Hz, RMS IISOL 1 mA t = 1 min t=1s Md Mounting torque (M5) Terminal connection torque (M3; M5) Weight typ. 5/4415 % 1.5/1315 % 250 Features * Thyristor controller for AC (circuit W3C acc. to IEC) for mains frequency * Package with metal base plate * Isolation voltage 3000 V~ * Planar passivated chips * UL applied Applications * Switching and control of three phase AC circuits * Softstart AC motor controller * Solid state switches * Light and temperature control Advantages * Easy to mount with two screws * Space and weight savings * Improved temperature and power cycling * High power density Nm/lb.in. Nm/lb.in. g Data according to IEC 60747 refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions (c) 2008 IXYS All rights reserved 20080828a 1-2 G VWO 80 VWO 95 Symbol Conditions Characteristic Values VWO 80 VWO 95 ID, IR TVJ = TVJM; VR = VRRM; VD = VDRM 5 5 VT IT 1.65 1.57 V VT0 rT For power-loss calculations only 0.85 5.2 0.85 4.8 V m VGT VD = 6 V; IGT VD = 6 V; VGD IGD TVJ = TVJM; IL = 150 A; TVJ = 25C mA 1.0 1.6 100 150 1.0 1.6 100 150 V V mA mA VD = 2/3 VDRM 0.2 5 0.2 5 V mA TVJ = 25C; tP = 10 s IG = 0.3 A; diG/dt = 0.3 A/s 200 200 mA IH TVJ = 25C; VD = 6 V; RGK = 150 150 mA tgd TVJ = 25C; VD = 1/2 VDRM IG = 0.3 A; diG/dt = 0.3 A/s 2 2 s tq TVJ = TVJM; IT = 20 A, tP = 200 s; di/dt = -10 A/s typ. VR = 100 V; dv/dt = 15 V/s; VD = 2/3 VDRM 150 150 s 0.81 0.135 1.0 0.167 0.66 0.11 0.93 0.155 u K/W K/W K/W K/W Creeping distance on surface Creepage distance in air Max. allowable acceleration 8.0 4.5 50 mm mm m/s2 s dS dA a thyristor; sine 180el module thyristor; sine 180el module -o RthJK per per per per e RthJC t TVJ = 25C TVJ = -40C TVJ = 25C TVJ = -40C h a Dimensions in mm (1 mm = 0.0394") p G IXYS reserves the right to change limits, test conditions and dimensions (c) 2008 IXYS All rights reserved 20080828a 2-2