MBR1020VL Surface Mount Schottky Power Rectifier Features * * * * * * Ultra Thin Profile - Maximum Height of 1.08 mm High Surge Capacity UL Flammability 94V-0 Classification MSL 1 Green Mold Compound These Devices are Pb-Free, Halogen Free Free and are RoHS Compliant www.onsemi.com 1 Cathode 2 Anode Schottky Power Rectifier Specifications ABSOLUTE MAXIMUM RATINGS (TA = 25C unless otherwise noted) Symbol Parameter Value Unit VRRM Peak Repetitive Reverse Voltage 20 V IF(AV) Average Rectified Forward Current 1.0 A IFSM Non-Repetitive Peak Surge Current: Surge Applied at Rated Load Conditions, Half Wave, Single Phase, 60Hz 45 A dv/dt Voltage Rate of Change TJ TSTG SOD-123F CASE 425AD MARKING DIAGRAM &Y &ZRL&G 1000 V/ms Operating Junction Temperature Range -55 to +125 C Storage Temperature Range -55 to +125 C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Band Indicates Cathode &Y &Z RL &G = Binary Calendar Year Coding Scheme = Assembly Plant Code = Specific Device Code = Single Digit Weekly Data Code ORDERING INFORMATION See detailed ordering and shipping information on page 2 of this data sheet. (c) Semiconductor Components Industries, LLC, 2015 June, 2018 - Rev. 2 1 Publication Order Number: MBR1020VL/D MBR1020VL THERMAL CHARACTERISTICS (TA = 25C unless otherwise noted) Symbol Value Unit RqJA Typical Thermal Resistance, Junction-to-Ambient (Note 1) Characteristic 200 C/W YJL Typical Thermal Characteristics, Junction-to-Lead (Note 2) 70 C/W 1. Mounted with minimum recommended pad size, PC board FR4. 2. Mounted on a FR4 PCB, single-sided copper, with 10 cm * 10 cm copper pad area. ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Parameter Min Typ Max Unit IF = 0.1 A - - 0.275 V IF = 0.1 A, TA = 85C - - 0.205 IF = 0.5 A - - 0.315 IF = 0.5 A, TA = 85C - - 0.270 IF = 1.0 A - - 0.340 IF = 1.0 A, TA = 85C - - 0.300 Instantaneous Reverse Current at Rated DC Voltage (Note 3) TA = 25C - - 0.60 TA = 85C - - 15 Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A - 12.4 - Symbol VF IR Trr Instantaneous Forward Voltage (Note 3) Conditions mA ns Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 3. Pulse test: pulse width = 300 ms, duty cycle < 2% ORDERING INFORMATION Part Number Top Mark Package Shipping MBR1020VL RL SOD-123F (Pb-Free/Halogen Free) 3000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. www.onsemi.com 2 MBR1020VL TYPICAL PERFORMANCE CHARACTERISTICS 100 IR, Reverse Current (mA) IF, Instantaneous Forward Current (A) 10 TJ = 125C 1 TJ = 85C TJ = 25C 0.1 0.0 TJ = 100C 10 CJ, Junction Capacitance (pF) TJ = 50C 0.1 TJ = 25C 0.01 0 0.1 0.2 0.3 0.4 0.5 VF, Instantaneous Forward Voltage (V) 500 300 200 100 4 6 8 10 12 14 16 10 15 20 Figure 2. Typical Reverse Characteristics 400 2 5 VR, Reverse Voltage (V) TJ = 25C 0 TJ = 85C 1 Figure 1. Typical Forward Characteristics 0 TJ = 125C 18 20 VR, Reverse Voltage (V) Figure 3. Capacitance www.onsemi.com 3 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SOD-123FL CASE 425AD ISSUE A DATE 04 AUG 2017 SCALE 4:1 DOCUMENT NUMBER: STATUS: 98AON13725G ON SEMICONDUCTOR STANDARD NEW STANDARD: (c) Semiconductor Components Industries, LLC, 2002 October, DESCRIPTION: 2002 - Rev. 0 SOD-123FL http://onsemi.com 1 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped "CONTROLLED COPY" in red. Case Outline Number: PAGE 1 OFXXX 2 DOCUMENT NUMBER: 98AON13725G PAGE 2 OF 2 ISSUE REVISION DATE O RELEASED FOR PRODUCTION FROM FAIRCHILD MA02B TO ON SEMICONDUCTOR. REQ. BY B. NG. 31 AUG 2016 A CONVERTED TO ONSEMI FORMAT AND ADDED BACKSIDE FOOT LENGTH. REQ. BY H. ALLEN. 04 AUG 2017 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. (c) Semiconductor Components Industries, LLC, 2017 August, 2017 - Rev. A Case Outline Number: 425AD ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative