2.5MHz 4-, 8-, 10- & 12-Channel Rail-to-Rail Buffers Features General Description * 2.5MHz -3dB bandwidth * Supply voltage = 4.5V to 16.5V * Low supply current (per buffer) = 120A * High slew rate = 1.5V/s * Rail-to-rail input/output swing * Ultra-small packages The EL5127C, EL5227C, EL5327C, and EL5427C are low power, high voltage rail-to-rail input/output buffers designed for use in reference voltage buffering applications in small LCD displays. They are available in quad (EL5127C), octal (EL5227C), 10-channel (EL5327C), and 12-channel (EL5427C) topologies. All buffers feature a -3dB bandwidth of 2.5MHz and operate from just 120A per buffer. This family also features a continuous output drive capability of 30mA (sink and source). Applications * * * * * * TFT-LCD drive circuits Electronic games Touch-screen displays Personal communication devices Personal digital assistants (PDA) Portable instrumentation The quad channel EL5127C is available in the 10-pin MSOP package. The 8-channel EL5227C is available in both the 20-pin TSSOP and 24-pin LPP packages, the 10-channel EL5327C in the 24-pin TSSOP and 24-pin LPP packages, and the 12-channel EL5427C in the 28-pin TSSOP and 32-pin LPP packages. All buffers are specified for operation over the full -40C to +85C temperature range. Ordering Information Part No Package Tape & Reel Outline # EL5127CY 10-Pin MSOP MDP0043 EL5227CL 24-Pin LPP MDP0046 EL5227CR 20-Pin TSSOP MDP0044 EL5327CL 24-Pin LPP MDP0046 EL5327CR 24-Pin TSSOP MDP0044 EL5427CL 32-Pin LPP MDP0046 EL5427CL 28-Pin TSSOP MDP0044 Connection Diagrams 1 VIN1 VOUT1 20 2 VIN2 VOUT2 19 3 VIN3 VOUT3 18 4 VIN4 VOUT4 17 VIN1 1 10 VOUT1 5 VS+ VS- 16 VIN2 2 9 VOUT2 6 VS+ VS- 15 VS+ 3 7 VIN5 VOUT5 14 VIN3 4 7 VOUT3 8 VIN6 VOUT6 13 VIN4 5 6 VOUT4 9 VIN7 VOUT7 12 10 VIN8 VOUT8 11 8 VS- Connection Diagrams are continued on page 5 Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a "controlled document". Current revisions, if any, to these specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation. October 24, 2001 EL5127C (10-Pin MSOP) EL5227C (20-Pin TSSOP Top View) (c) 2001 Elantec Semiconductor, Inc. EL5127C, EL5227C, EL5327C, EL5427C - Product Brief EL5127C, EL5227C, EL5327C, EL5427C - Product Brief EL5127C, EL5227C, EL5327C, EL5427C - Product Brief EL5127C, EL5227C, EL5327C, EL5427C - Product Brief 2.5MHz 4-, 8-, 10- & 12-Channel Rail-to-Rail Buffers General Disclaimer Specifications contained in this data sheet are in effect as of the publication date shown. Elantec, Inc. reserves the right to make changes in the circuitry or specifications contained herein at any time without notice. Elantec, Inc. assumes no responsibility for the use of any circuits described herein and makes no representations that they are free from patent infringement. October 24, 2001 WARNING - Life Support Policy Elantec, Inc. products are not authorized for and should not be used within Life Support Systems without the specific written consent of Elantec, Inc. Life Support systems are equipment intended to support or sustain life and whose failure to perform when properly used in accordance with instructions provided can be reasonably expected to result in significant personal injury or death. Users contemplating application of Elantec, Inc. Products in Life Support Systems are requested to contact Elantec, Inc. factory headquarters to establish suitable terms & conditions for these applications. Elantec, Inc.'s warranty is limited to replacement of defective components and does not cover injury to persons or property or other consequential damages. Elantec Semiconductor, Inc. 675 Trade Zone Blvd. Milpitas, CA 95035 Telephone: (408) 945-1323 (888) ELANTEC Fax: (408) 945-9305 European Office: +44-118-977-6020 Japan Technical Center: +81-45-682-5820 2 Printed in U.S.A.