SPEC NO: DSAH4236 REV NO: V.4 DATE: MAR/30/2009 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1201003997
3.5x2.8mm SURFACE MOUNT LED LAMP
PRELIMINARY SPEC
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Part Number: AA3528AQBC/D Blue
Features
zSingle color.
zSuitable for all SMT assembly and solder process.
zAvailable on tape and reel.
zIdeal for backlighting.
zPackage : 1500pcs / reel.
zMoisture sensitivity level : level 4.
zRoHS compliant.
Description
The Blue source color devices are made with AlGaInN on
Sapphire Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAH4236 REV NO: V.4 DATE: MAR/30/2009 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1201003997
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
AA3528AQBC/D Blue (AlGaInN) WATER CLEAR 70 200 120°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Blue 468 nm IF=20mA
λD [1] Dominant Wavelength Blue 470 nm IF=20mA
Δλ1/2 Spectral Line Half-width Blue 25 nm IF=20mA
C Capacitance Blue 100 pF VF=0V;f=1MHz
VF [2] Forward Voltage Blue 3.3 4 V IF=20mA
IR Reverse Current Blue 10 uA VR=5V
Parameter Blue Units
Power dissipation 120 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAH4236 REV NO: V.4 DATE: MAR/30/2009 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1201003997
Blue AA3528AQBC/D
SPEC NO: DSAH4236 REV NO: V.4 DATE: MAR/30/2009 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1201003997
AA3528AQBC/D
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Dimensions
(Units : mm)
SPEC NO: DSAH4236 REV NO: V.4 DATE: MAR/30/2009 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1201003997
PACKING & LABEL SPECIFICATIONS AA3528AQBC/D
