2W005G - 2W10G 2W005G - 2W10G Features * Glass passivated junction. * Ideal for printed circuit board. * Reliable low cost construction technique results in inexpensive product. * High surge current capability. * ~ UL certified, UL #E96005. ~ - + WOB Bridge Rectifiers (Glass Passivated) Absolute Maximum Ratings* Symbol TA = 25C unless otherwise noted Value Parameter Units 005G 01G 02G 04G 06G 08G 10G VRRM Maximum Repetitive Reverse Voltage 50 100 200 400 600 800 1000 VRMS Maximum RMS Bridge Input Voltage 35 70 140 280 420 560 700 V VR DC Reverse Voltage 50 100 200 400 600 800 1000 V IF(AV) Average Rectified Forward Current, @ TA = 50C IFSM Tstg Non-repetitive Peak Forward Surge Current 8.3 ms Single Half-Sine-Wave Storage Temperature Range -55 to +150 C TJ Operating Junction Temperature -55 to +150 C (Rated VR) V 2.0 A 60 A *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Thermal Characteristics Symbol Parameter Value PD Power Dissipation RJA Thermal Resistance, Junction to Ambient,* per leg Thermal Resistance, Junction to Lead,* per leg RJL Units 3.13 W 40 C/W 15 C/W *Device mounted on PCB with 0.375" (9.5 mm) lead length. Electrical Characteristics Symbol TA = 25C unless otherwise noted Parameter Device Units VF Forward Voltage, per bridge @ 2.0 A 1.1 V IR Reverse Current, per leg @ rated VR TA = 25C TA = 125C I2t rating for fusing t < 8.3 ms 5.0 500 A A 10 A2s Total Capacitance, per leg VR = 4.0 V, f = 1.0 MHz 19 pF CT 2001 Fairchild Semiconductor Corporation 2W005G -2W10G, Rev. C (continued) 2 1.5 1 0.5 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD .375" (9.0mm) LEAD LENGTHS 0 25 50 75 100 125 150 Ambient Temperature [C] 175 Figure 1. Forward Current Derating Curve Peak Forward Surge Current, IFSM [A] Average Rectified Forward Current, IF [A] Typical Characteristics 40 30 20 10 1 2 5 10 20 50 Number of Cycles at 60Hz 100 100 Reverse Current, IR [mA] Forward Current, IF [A] 50 Figure 2. Non-Repetitive Surge Current 10 1 TA = 25 C s Pulse Width = 300 2% Duty Cycle 0.1 0.01 60 0 0.2 0.4 0.6 0.8 1 Forward Voltage, VF [V] 1.2 1.4 Figure 3. Forward Voltage Characteristics 2001 Fairchild Semiconductor Corporation TA = 125 C 10 1 TA = 25 C 0.1 0 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage [%] Figure 4. Reverse Current vs Reverse Voltage 2W005G -2 W10G, Rev. C 2W005G - 2W10G Bridge Rectifiers (Glass Passivated) TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM BottomlessTM CoolFETTM CROSSVOLTTM DenseTrenchTM DOMETM EcoSPARKTM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM FAST FASTrTM FRFETTM GlobalOptoisolatorTM GTOTM HiSeCTM ISOPLANARTM LittleFETTM MicroFETTM MicroPakTM MICROWIRETM OPTOLOGICTM OPTOPLANARTM PACMANTM POPTM Power247TM PowerTrench QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM SILENT SWITCHER SMART STARTTM STAR*POWERTM StealthTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM TruTranslationTM UHCTM UltraFET VCXTM STAR*POWER is used under license DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant into support device or system whose failure to perform can the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life failure to perform when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. H4