SH-7000
ROTARY CODED SWITCHES (SMD)
ポジション数
No. of positions
回転トルク
Adjustment torque
ステップ角度
Stepping angle
はんだ付け性
Solderability
固着性
Shear (adhesion)
耐基板曲げ性
Substrate bending
引きはがし強さ
Pull-off strength
10, 16
3 ~ 20 mN·m { 3~ 204 gf·cm}
36° (10 positions)
22.5° (16 positions)
245 ± 3 °C, 2 ~ 3 s
5 N {0.51 kgf} 10 s
手はんだ
Manual soldering:
350 ± 10 °C, 3 ~ 4 s
Width 90 mm, bend 3 mm, 5 s, 1 time
5 N {0.51 kgf} 10s
耐振性
Vibration
耐衝撃性
Shock
耐久性
Load life
耐湿性
Humidity
耐熱性
High temperature exposure
耐寒性
Low temperature exposure
温度サイクル
Thermal shock
振幅
(Amplitude) 1.5 mm
(全振幅)
or
加速度
(Acceleration) 98 m/s2,
10-500-10 Hz, 3 directions for 2 h each
490 m/s2, 11 ms
6 directions for 3 times each
10000 steps minimum, DC5 V, 100 mA
85 °C, 96 h
105 °C, 96 h (Gray code)
40 °C, 相対湿度Relative humidity 90 ~ 95 %,
240 h
−40 °C, 96 h
−40 (0.5 h) ~ 85 °C ( 0.5 h ), 5 cycles
−40 (0.5 h) ~ 105 °C ( 0.5 h ), 5 cycles (Gray code)
■機械的特性
MECHANICAL CHARACTERISTICS
■環境特性
ENVIRONMENTAL CHARACTERISTICS
〈はんだ耐熱性評価用リフロープロファイル
Reflow profile for soldering heat evaluation
〉
リフロー回数:2回 Reflow : two times maximum
Peak : 250
Over 230 °C
Pre Heating Zone
180 °C
(°C)
250
200
150
100
50
150 °C
90 ± 30 s
30 ± 10 s
Soldering Zone
Heating time
Temperature
°C
+5
0
はんだ耐熱性
Soldering heat
リフロー Reflow:255 °C (Peak temperature)
(詳細は下記プロファイル参照)
Reflow : Peak temperature 255 °C
(Please refer to the profile below.)
■外形寸法図
OUTLINE DIMENSIONS Unless otherwise specified, tolerance: ± 0.3 (Unit: mm)
OSH-7010A (Real code)
OSH-7030A (Complementary code)
OSH-7010B (Real code)
OSH-7030B (Complementary code)
7.1
7.3
0.7 W × 2.8 L × 1 D
コンプリメンタリコードのみ表示
Marking appears only with complementary code
⑧Ⓒ②
①Ⓒ④
製造年月記号
Production date code
6 – 0.6
t = 0.15
3.75
7.5
5.1
2.54 2.54
7.3
7.1
0.7 W × 2.8 L × 1D
製造年月記号
Production date code
コンプリメンタリコードのみ表示
Marking appears only with complementary code
①Ⓒ④
⑧Ⓒ②
10
0.65 min. 0.65 min.
3.75
6 – 0.6
t = 0.15
2.54 2.54
{ } :
参考値
Reference only
フロー:260±3°Cの槽内に端子
先端から基板の裏面まで 5
〜 6 秒間浸漬を 2 回
Flow : 260 ± 3 °C as the temperature in
a pot of molten solder, immer sion
from head of ter minal to backside
of board,5 ~ 6 s, two times
maximum