MMBTRC101SS ... MMBTRC106SS MMBTRC101SS ... MMBTRC106SS Surface Mount Bias Resistor Transistors SMD Transistoren mit Eingangsspannungsteiler NPN NPN Version 2011-02-10 Power dissipation - Verlustleistung 1.1 2.9 0.1 0.4 Plastic case Kunststoffgehause 1 1.30.1 2.5 max 3 Type Code 200 mW SOT-23 (TO-236) Weight approx. - Gewicht ca. 0.01 g Plastic material has UL classification 94V-0 Gehausematerial UL94V-0 klassifiziert 2 1.9 Standard packaging taped and reeled Standard Lieferform gegurtet auf Rolle Dimensions - Mae [mm] 1 = In 2 = Gnd 3 = Out Maximum ratings and characteristics (TA = 25C) Grenz- und Kennwerte (TA = 25C) Resistor combinations - Widerstandskombinationen R1 [k] R2 [k] MMBTRC101SS 4.7 4.7 MMBTRC102SS 10 10 MMBTRC103SS 22 22 MMBTRC104SS 47 47 MMBTRC105SS 2.2 47 MMBTRC106SS 4.7 47 Input-voltage - Eingangs-Spannung VI MMBTRC101SS -10 ... +20 V MMBTRC102SS -10 ... +30 V MMBTRC103SS -10 ... +40 V MMBTRC104SS -10 ... +40 V MMBTRC105SS -5 ... +12 V MMBTRC106SS -5 ... +20 V Output voltage - Ausgangs-Spannung VO 50 V Output current - Ausgangs-Strom IO 100 mA Power dissipation - Verlustleistung Ptot 200 mW 1) Junction temperature - Sperrschichttemperatur Storage temperature - Lagerungstemperatur Tj TS -55...+150C -55...+150C 3 Output R1 R2 Input 1 1 2 Ground Valid, if leads are kept at ambient temperature at a distance of 2 mm from case Gultig wenn die Anschlussdrahte in 2 mm Abstand vom Gehause auf Umgebungstemperatur gehalten werden (c) Diotec Semiconductor AG http://www.diotec.com/ 1 MMBTRC101SS ... MMBTRC106SS Characteristics (Tj = 25C) Kennwerte (Tj = 25C) Min. Typ. Max. MMBTRC101SS 30 - - MMBTRC102SS 50 - - MMBTRC103SS 70 - - MMBTRC104SS 80 - - MMBTRC105SS 80 - - MMBTRC106SS 80 - - IO(off) - - 500 nA MMBTRC101SS - - 1.8 mA MMBTRC102SS - - 0.88 mA MMBTRC103SS - - 0.36 mA MMBTRC104SS - - 0.18 mA MMBTRC105SS - - 3.6 mA MMBTRC106SS - - 1.8 mA VO(on) - - 0.3 V MMBTRC101SS - - 2V MMBTRC102SS - - 2.4 V MMBTRC103SS - - 3V MMBTRC104SS - - 5V MMBTRC105SS - - 1.1 V MMBTRC106SS - - 1.3 V ..C101...C104.. 1V - - ..C105...C106.. 0.5 V - - R1 -30% +30% MMBTRC101SS 0.8 1.2 MMBTRC102SS 0.8 1.2 MMBTRC103SS 0.8 1.2 MMBTRC104SS 0.8 1.2 MMBTRC105SS 0.026 0.087 MMBTRC106SS 0.055 0.185 fT - DC current gain - Kollektor-Basis-Stromverhaltnis 1) VO = 5 V, IO = 10 mA Output cutoff current - Ausgangs-Reststrom VO = 50 V Input current - Eingangsstrom GI II VI = 5 V Output voltage - Ausgangs-Spannung IO = 10 mA, II = 0.5 mA Input voltage (on) - Eingangsspannung (Ein) VO = 0.2 V, IO = 5 mA Input voltage (off) - Eingangs-Spannung (Aus) VO = 5 V, IO = 0.1 mA VI(on) VI(off) Input resistor tolerance - Toleranz Eingangswiderstand Resistance ratio - Widerstandsverhaltnis R2/R1 Transition Frequency - Transitfrequenz (Transistor) VO = 10 V, IO = 5 mA 1 2 200 MHz - Tested with pulses tp = 300 s, duty cycle 2% - Gemessen mit Impulsen tp = 300 s, Schaltverhaltnis 2% http://www.diotec.com/ (c) Diotec Semiconductor AG