AY2 Series www.vishay.com Vishay BCcomponents Automotive Grade AC Line Rated Ceramic Disc Capacitors Class X1, 440 VAC, Class Y2, 300 VAC FEATURES * AEC-Q200 qualified * Withstands 85 / 85 / 1000 h test * Can pass 3000 temperature cycles (from -55 C to +125 C) * Complying with IEC 60384-14 4th edition * High reliability * Vertical (inline) kinked or straight leads * Singlelayer AC disc safety capacitors * PPAP (AIAG version) is available * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESIGN SUPPORT TOOLS click logo to get started * X1, Y2 according to IEC 60384-14.4 * Application as Y capacitors for AC line filter and primary-secondary coupling on battery chargers for PHEV/EV * Application as filter capacitors on DC/DC converters for PHEV/EV and HEV Models Available QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class 1 DESIGN 2 Ceramic Dielectric U2J U2J Y5S, Y5U Y5S, Y5U Voltage (VAC) 300 440 300 440 Min. Capacitance (pF) 10 Max. Capacitance (pF) 47 APPLICATIONS Mounting 68 4700 The capacitor consists of a ceramic disc which is silver plated on both sides. Connection leads are made of tin plated copper-clad steel having a diameter of 0.6 mm. The capacitors may be supplied with straight or kinked leads having a lead spacing of 5 mm, 7.5 mm, or 10.0 mm. Encapsulation is made of flame retardant epoxy resin in accordance with UL 94 V-0. Radial CAPACITANCE RANGE OPERATING TEMPERATURE RANGE 10 pF to 4700 pF -55 C to +125 C RATED VOLTAGE UR TEMPERATURE CHARACTERISTICS Class 1: N750 (U2J) Class 2: Y5S, Y5U SECTIONAL SPECIFICATIONS Climatic category (according to EN 60058-1) Class 1 and class 2: 40/125/21 COATING According to UL 94 V-0 Epoxy resin, isolating, flame retardant APPROVALS IEC 60384-14.4 UL 60384-14 DIN EN 60384-14 CSA E60384-1:03, CSA E60384-14:09 PACKAGING Bulk, tape and reel, taped ammopack IEC 60384-14.4: (X1): 440 VAC, 50 Hz (Y2): 300 VAC, 50 Hz 1000 VDC TEST VOLTAGE Component test (100 %): 2600 VAC, 50 Hz, 2 s Random sampling test (destructive test): 2600 VAC, 50 Hz, 60 s Voltage proof of coating (destructive test): 2600 VAC, 50 Hz, 60 s INSULATION RESISTANCE 10 000 M CAPACITANCE TOLERANCE 20 % (code M); 10 % (code K) DISSIPATION FACTOR Class 1: max. 0.3 % (1 MHz) Class 2: max. 2.5 % (1 kHz) Revision: 29-Mar-18 Document Number: 28550 1 For technical questions, contact: cdc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AY2 Series www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters F e = 3.0 max. e = 3.0 max. O 0.6 0.05 Dmax. Tmax. L = 30.0 5.0 Capacitors with 5.0 mm, 7.5 mm, or 10.0 mm lead spacing TECHNICAL DATA CAPACITANCE C (pF) CAPACITANCE TOLERANCE (%) U2J (N750) 10 15 22 33 47 Y5S (2C3) 68 100 150 220 330 470 Y5U (2E3) 680 1000 1500 2200 3300 3900 4700 BODY DIAMETER Dmax. (mm) 10 7.5 10 BODY THICKNESS Tmax. (mm) 5.0 7.5 5.0 LEAD SPACING F (mm) 1 mm PART NUMBER MISSING DIGITS SEE ORDERING CODE BELOW 5.0, 7.5, or 10.0 AY2100K29U2JS6### AY2150K29U2JS6### AY2220K29U2JS6### AY2330K29U2JS6### AY2470K29U2JS6### 5.0, 7.5, or 10.0 AY2680K29Y5SS6### AY2101K29Y5SS6### AY2151K29Y5SS6### AY2221K29Y5SS6### AY2331K29Y5SS6### AY2471K29Y5SS6### 5.0, 7.5, or 10.0 AY2681#29Y5US6### AY2102#29Y5US6### AY2152#31Y5US6### AY2222#35Y5US6### AY2332#41Y5US6### AY2392#43Y5US6### AY2472#49Y5US6### 7.5 8.5 9.5 11.0 11.5 13.0 20 5.0 Note (1) 10 % available on request ORDERING CODE # 7th digit Capacitance tolerance ### 15th to 17th digit Lead configuration Example AY2 221 Series Capacitance value K 29 Tolerance Size code code 10 % = K, 20 % = M Available configurations see below Y5S S Temperature coefficient Rated voltage 6 U Lead wire Packaging / diameter lead length 3 = bulk T = tape and reel U= ammopack Revision: 29-Mar-18 V 7 Lead style Lead spacing L= straight V = inline kinked 5 = 5.0 7 = 7.5 0 = 10.0 Document Number: 28550 2 For technical questions, contact: cdc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AY2 Series www.vishay.com Vishay BCcomponents LEADSPACING 5.0 mm and 7.5 mm PACKAGING CAPACITANCE VALUE SIZE CODE 10 pF to 4700 pF 29 to 49 PACKAGING QUANTITIES BODY DIAMETER Dmax. (mm) 13.0 BULK REEL AMMO 1000 1000 1000 BODY DIAMETER Dmax. (mm) 13.0 BULK REEL AMMO 1000 500 750 LEADSPACING 10.0 mm PACKAGING CAPACITANCE VALUE SIZE CODE 10 pF to 4700 pF 29 to 49 PACKAGING QUANTITIES Note * The capacitors are supplied in bulk packaging (cardboard boxes), in tape on reel in ammopack. STRAIGHT LEADS INLINE KINKED LEADS Dmax. Tmax. Tmax. Dmax. e SH 30 mm to 3.0 mm (R) 4.0 max. coating extension SH F F d = 0.6 mm G 0.6 mm Fig. 1 - The hole pitch 12.7 mm for lead spacing 5.0 mm (0.2"), and hole pitch 15.0 mm for lead spacing 7.5 mm (0.3") Revision: 29-Mar-18 Document Number: 28550 3 For technical questions, contact: cdc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AY2 Series www.vishay.com Vishay BCcomponents Fig. 2 - The hole pitch 12.7 mm for lead spacing 10.0 mm (0.4") DIMENSION OF TAPE SYMBOL PARAMETER D (1) d DIMENSIONS (mm) FIG. 1 (5 mm) FIG. 1 (7.5 mm) Body diameter 11.0 max. 14.0 max. FIG. 2 (10 mm) 16.0 max. Lead diameter 0.6 0.05 0.6 0.05 0.6 0.05 P Pitch of component 12.7 1 15.0 1 25.4 1 P0 (2) Pitch of sprocket hole 12.7 0.3 15.0 0.3 12.7 0.3 P1 (3) Distance, hole center to lead 3.85 0.7 3.75 0.7 7.7 1.0 P2 (3) Distance, hole to center of component 6.35 1.3 7.5 1.5 12.7 1.5 10.0 (+ 0.6/- 0.4) F Lead spacing 5.0 (+ 0.6/- 0.4) 7.5 (+ 0.6/- 0.4) h Average deviation across tape 1.0 max. 1.0 max. 1.0 max. P Average deviation in direction of reeling 1.0 max. 1.0 max. 1.0 max. 18.0 + 1/- 0.5 W Carrier tape width 18.0 + 1/- 0.5 18.0 + 1/- 0.5 W0 Hold-down tape width 5.0 min. 5.0 min. 5.0 min. W1 Position of sprocket hole 9.0 + 0.75/- 0.5 9.0 + 0.75/- 0.5 9.0 + 0.75/- 0.5 W2 Distance of hold-down tape 3.0 max. 3.0 max. 3.0 max. H1 Maximum component height 32 40 40 H0 Height to seating plane (for kinked leads) 16.0 0.5 16.0 0.5 16.0 0.5 H0 Height to seating plane (for straight leads) 20.0 0.5 20.0 0.5 20.0 0.5 L Length of cut leads 11.0 max. 11.0 max. 11.0 max. L1 Length of lead protrusion 1.0 max. 1.0 max. 1.0 max. D0 Diameter of sprocket hole 4.0 0.2 4.0 0.2 4.0 0.2 t Total tape thickness 0.9 max. 0.9 max. 0.9 max. t1 Maximum thickness of tape and wires 1.5 max. 1.5 max. 1.5 max. Notes (1) See "Technical Data" table (2) Cumulative pitch error: 1 mm/20 pitches (3) Obliquity maximum 3 Revision: 29-Mar-18 Document Number: 28550 4 For technical questions, contact: cdc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AY2 Series www.vishay.com Vishay BCcomponents REEL AND TAPE DATA in millimeters 51 max. 355.6 2.0 330 28 1.5 8.0 45 max. 360 55 Reel with capacitors on tape Ammopack with capacitors on tape APPROVALS IEC 60384-14.4 - Safety tests This approval together with CB test certificate substitutes all national approvals. CB Certificate Y2-capacitor: CB test certificate: US-26163-UL 10 pF to 4.7 nF 300 VAC X1-capacitor: CB test certificate: US-26163-UL 10 pF to 4.7 nF 440 VAC VDE Y2-capacitor: VDE marks approval: 40009669 10 pF to 4.7 nF 300 VAC X1-capacitor: VDE marks approval: 40009669 10 pF to 4.7 nF 440 VAC E183844 10 pF to 4.7 nF 300 VAC E183844 10 pF to 4.7 nF 440 VAC DIN EN 60384-14 VDE 0565-1-1:2006-04 - Safety tests Underwriters Laboratories Inc./Canadian Standards Association Y2-capacitor: UL-test certificate: X1-capacitor: UL-test certificate: UL 60384-14, CSA E60384-1:03 2nd edition, CSA E60384-14:09 2nd edition Across-the-line, antenna-coupling and line-by-pass component CQC Y2-capacitor: CQC test certificate: CQC05001012316 10 pF to 4.7 nF 300 VAC X1-capacitor: CQC test certificate: CQC05001012316 10 pF to 4.7 nF 440 VAC Revision: 29-Mar-18 Document Number: 28550 5 For technical questions, contact: cdc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AY2 Series www.vishay.com Vishay BCcomponents MARKING Sample (2 sides) 10 AY2 472M Y2 300 V~ X1 440 V~ XX Front XX - Year - Week Back PERFORMANCE NO. ITEMS SPECIFICATION TEST METHOD 1 Visual and mechanical examination No visible damage. The marking shall be legible. Dimensions are within specification. Capacitors shall be visually inspected for visible evidence of defect. Dimensions shall be measured with calipers or micrometers. 2 Capacitance Within the specified tolerance. The capacitance shall be measured at 25 C 3 C, 75 % RH maximum with 1.0 VRMS 0.2 VRMS, 1 kHz for Y5U, Y5S, and 1 MHz for U2J. 3 Dissipation factor (D.F.) U2J: 0.3 % max. Y5U, Y5S: 2.5 % max. The dissipation factor shall be measured at 25 C 3 C, 75 % RH maximum with 1.0 VRMS 0.2 VRMS, 1 kHz for Y5U, Y5S, and 1 MHz for U2J. 4 Insulation resistance (I.R.) 10 G min. Insulation resistance shall be measured within 60 s 5 s of charging at 500 VDC. 5 Dielectric strength (between lead wires) No damage. 2600 VAC are applied for 60 s. 50 mA max. (destructive test) 6 Temperature characteristic No visible damage. The marking shall be legible. The capacitance shall be measured at each step specified in table below. The capacitance change from the value of step 3 shall not exceed the limit specified. External appearance Capacitance change n/a Dissipation factor U2J: 0.5 % max. at 1 V, 1 MHz Y5U, Y5S: 5 % max. at 1 V, 1 kHz Insulation resistance Dielectric strength (between lead wires) Revision: 29-Mar-18 10 G min. at 500 VDC 60 s at 25 C and -40 C 500 M min. at 500 VDC 60 s at 125 C 5 s 250 % rated voltage Step Temperature 1 25 C 3 C 2 -40 C 3 C 3 25 C 3 C 4 125 C 3 C 5 25 C 3 C Document Number: 28550 6 For technical questions, contact: cdc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AY2 Series www.vishay.com Vishay BCcomponents PERFORMANCE NO. 7 ITEMS High temperature operation life SPECIFICATION TEST METHOD External appearance No visible damage. The marking shall be legible. Test voltage: 1.5 kVAC, 60 s Impulse voltage: each individual capacitor shall be subjected to a 5 kV impulse for three times. Before the capacitors are applied to life test. Capacitance change 15 % max. 100 % 90 % T1 = 1.2 s T2 = 50 s 50 % 30 % Dissipation factor U2J: 0.5 % max. at 1 V, 1 MHz Y5U, Y5S: 5 % max. at 1 V, 1 kHz t 0% T1 T2 8 Life Test Insulation resistance 3 G min. at 500 VDC, 60 s Dielectric strength (between lead wires) No failure at 1.5 kVAC, 60 s External appearance No visible damage. The marking shall be legible. Capacitance change 15 % max. The specimen capacitors shall be submitted to an endurance test of 1000 h + 48 h / - 0 h in a chamber at 125 C 3 C with a voltage of 550 VAC. Pre-treatment: capacitor shall be backed at 125 C 3 C for 1 h before initial measurements. Post-treatment: capacitors shall be placed at room condition for 24 h 2 h before measurements. Test voltage: 1.5 kVAC, 60 s Impulse voltage: each individual capacitor shall be subjected to a 5 kV impulse for three times. Before the capacitors are applied to life test. 100 % 90 % T1 = 1.2 s T2 = 50 s 50 % 30 % Dissipation factor U2J: 0.5 % max. at 1 V, 1 MHz Y5U, Y5S: 5 % max. at 1 V, 1 kHz t 0% T1 T2 Revision: 29-Mar-18 Insulation resistance 3 G min. at 500 VDC, 60 s Dielectric strength (between lead wires) No failure at 1.5 kVAC, 60 s The specimen capacitors shall be submitted to an endurance test of 1000 h + 48 h / - 0 h in a chamber at 125 C 3 C with a voltage of 550 VAC, except that once every hour the voltage shall be increase to 1000 VAC for 0.1 s. Pre-treatment: capacitor shall be backed at 125 C 3 C for 1 h before initial measurements. Post-treatment: capacitors shall be placed at room condition for 24 h 2 h before measurements. Document Number: 28550 7 For technical questions, contact: cdc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AY2 Series www.vishay.com Vishay BCcomponents PERFORMANCE NO. 9 10 11 12 ITEMS Humidity test (under steady state) Humidity test (under load state) Biased humidity Termination strength SPECIFICATION TEST METHOD External appearance No visible damage. Capacitance change U2J: 10 % Y5U, Y5S: 20 % Dissipation factor U2J: 0.5 % max. at 1 V, 1 MHz Y5U, Y5S: 5 % max. at 1 V, 1 kHz Insulation resistance 3 G min. at 500 VDC, 60 s Dielectric strength (between lead wires) No failure at 1.5 kVAC, 60 s Ambient temperature: 40 C 2 C Relative humidity: 90 % to 95 % RH Duration: 500 h + 48 h / - 0 h Without loading Pre-treatment: capacitor shall be stored at 40 C 2 C for 24 h 5 h before initial measurements. Post-treatment: capacitor shall be stored for 2 h at room conditions before final measurements. External appearance No visible damage. The marking shall be legible. Capacitance change U2J: 10 % Y5U, Y5S: 15 % Dissipation factor U2J: 0.5 % max. at 1 V, 1 MHz Y5U, Y5S: 5 % max. at 1 V, 1 kHz Insulation resistance 3 G min. at 500 VDC, 60 s Dielectric strength (between lead wires) No failure at 1.5 kVAC, 60 s External appearance No visible damage. The marking shall be legible. Capacitance change U2J: 10 % Y5U, Y5S: 15 % Dissipation factor U2J: 0.5 % max. at 1 V, 1 MHz Y5U, Y5S: 5 % max. at 1 V, 1 kHz Insulation resistance 3 G min. at 500 VDC, 60 s Dielectric strength (between lead wires) No failure at 1.5 kVAC, 60 s Pull test External appearance Lead wire should not be cut off, capacitor should not be broken. Capacitance change Within specification Dissipation factor Within specification Insulation resistance Within specification Ambient temperature: 40 C 2 C Relative humidity: 90 % to 95 % RH Duration: 500 h + 48 h / - 0 h Loading voltage: 440 VAC Pre-treatment: capacitor shall be stored at 40 C 5 C for 24 h 2 h before initial measurements. Post-treatment: capacitor shall be stored for 2 h at room conditions before final measurements. Loading voltage: 440 VAC Ambient temperature: 85 C 3 C Relative humidity: 85 % RH Duration: 1000 h + 48 h / - 0 h Pre-treatment: capacitor shall be stored at 40 C 5 C for 24 h 2 h, then place at room condition for 24 h 2 h before initial measurements. Post-treatment: capacitor shall be stored for 24 h at room conditions before final measurements. As a figure, fix the body of capacitor, apply a tensile weight gradually to each lead wire in the radial direction of capacitor up to 20 N, and keep it for 10 s 1 s. W Bending test Revision: 29-Mar-18 External appearance Lead wire should not be cut off, capacitor should not be broken. Bending each lead wire to 90 from the lead egress with 2.5 N force, then back to original position and bent again from the same direction. Totally 3 bends, 3 s each time. 1 bend: bending to 90 the return to normal position is one bend. Start from 1.6 mm to 3.2 mm from the part body. Document Number: 28550 8 For technical questions, contact: cdc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AY2 Series www.vishay.com Vishay BCcomponents PERFORMANCE NO. 13 ITEMS Resistance to solder heat SPECIFICATION TEST METHOD Visual No visible damage. The marking shall be legible. The lead wire shall be immersed into the melted solder of 260 C 5 C up to about 1.5 mm to 2 mm from the main body for 10 s 2 s. Inspect under 10 x magnification Capacitance change Within 10 % Capacitor Thermal screen Dissipation factor 1.5 mm to 2.0 mm U2J: 0.5 % max. at 1 V, 1 MHz Y5U, Y5S: 5 % max. at 1 V, 1 kHz Molten solder Insulation resistance 14 Solderability 1 G min. at 500 VDC, 60 s Dielectric strength (between lead wires) No failure at 1.5 kVAC, 60 s External appearance 95 % of terminations evenly covered with solder under 10 x magnification. Pre-treatment: Capacitor shall be stored at 125 C 5 C for 1 h, then placed at room condition for 24 h 2 h before initial measurements. Post-treatment: Capacitor shall be stored for 24 h 2 h at room condition. Method A at category 3, steam aging for 8 h 15 min. Solder and temperature: a) Lead (Pb)-free solder (Sn-3Ag-0.5Cu) 245 C 5 C b) H63 eutectic solder 235 C 5 C dip lead wire into an ethanol solution of 25 % 0.5 % rosin and then into molten solder for 5 s + 0 s / - 0.5 s. Depth of immersion within 1.25 mm, immerse and withdraw at 25 mm/s 6 mm/s 15 Vibration test Visual No visible damage. The marking shall be legible. Resin (adhesive) Revision: 29-Mar-18 Capacitance change Within 10 % Dissipation factor U2J: 0.5 % max. at 1 V, 1 MHz Y5U, Y5S: 5 % max. at 1 V, 1 kHz Insulation resistance 10 G min. at 500 VDC, 60 s Solder the capacitor and gum up the body to the test jig by resin (adhesive). The capacitor should be firmly soldered to the supporting lead wire. Vibration change from 10 Hz to 2000 Hz, then back to 10 Hz. Total amplitude: 1.5 mm with 5 g max., 12 cycles, 20 min for each mutually perpendicular directions, 3 directions. Document Number: 28550 9 For technical questions, contact: cdc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AY2 Series www.vishay.com Vishay BCcomponents PERFORMANCE NO. 16 ITEMS Mechanical shock SPECIFICATION External appearance TEST METHOD No visible damage. The marking shall be legible. Resin (adhesive) Capacitance change Within the specified tolerance. Dissipation factor U2J: 0.5 % max. at 1 V, 1 MHz Y5U, Y5S: 5 % max. at 1 V, 1 kHz Insulation resistance 10 G min. at 500 VDC, 60 s. Solder the capacitor and gum up the body to the test jig by resin (adhesive). 3 shocks in 2 directions should be applied, totally 3 mutually perpendicular axes, 18 shocks. Shock from: half-sine Duration: 6 ms Acceleration: 100 g 17 Resistance to solvents External appearance No visible damage. The marking shall be legible. Leave parts in solvent for 3 to 8 min at 25 C 5 C, 1 min air-drying Rub parts against wet bristle 10 times (3 x for marking, 10 x for part damage) Solvent 1: 1 part (by volume) of isopropyl alcohol, 3 parts (by volume) of mineral spirits Solvent 2: Terpene defluxer Solvent 3: 42 parts (by volume) of water, 1 part (by volume) of propylene glycol, 1 part (by volume) of monoethanolomine 18 Temperature cycle Capacitance change Within 10 % for U2J Within 20 % for Y5U and Y5S Dissipation factor U2J: 0.5 % max. at 1 V, 1 MHz Y5U, Y5S: 5 % max. at 1 V, 1 kHz Insulation resistance 3 G min at 500 VDC, 60 s Dielectric strength No failure at 1.5 kVAC, 60 s External appearance No visible damage. The marking shall be legible. The capacitor should be run 3000 temperature cycles. Step as below: Step 1 -55 C + 0 C / - 3 C, dwell time 30 min Step 2 Transition time 1 min Step 3 +125 C + 3 C / - 0 C, dwell time 30 min Step 4 Transition time 1 min Pre-treatment: capacitor shall be stored at 125 C 3 C for 1 h, then placed at room condition for 24 h 2 h before initial measurement. Post-treatment: capacitor shall be stored for 24 h 2 h at room condition. Note * 6800 pF and 10 000 pF only 1000 cycles 19 High temperature exposure (storage) Revision: 29-Mar-18 External appearance No visible damage. The marking shall be legible. Capacitance change Within 10 % for U2J Within 20 % for Y5U and Y5S Dissipation factor U2J: 0.5 % max. at 1 V, 1 MHz Y5U, Y5S: 5 % max. at 1 V, 1 kHz Insulation resistance 1 G min. at 500 VDC, 60 s Storage capacitor at 125 C 3 C for 1000 h + 48 h / - 0 h without loading. Pre-treatment: capacitor shall be stored at 125 C 3 C for 1 h, then placed at room condition for 24 h 2 h before initial measurement. Post-treatment: capacitor shall be stored for 24 h 2 h at room condition. Document Number: 28550 10 For technical questions, contact: cdc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AY2 Series www.vishay.com Vishay BCcomponents PERFORMANCE NO. ITEMS 20 ESD SPECIFICATION TEST METHOD External appearance No visible damage. The marking shall be legible. See chart "ESD Test Method" below Capacitance change Within 10 % Dissipation factor U2J: 0.5 % max. at 1 V, 1 MHz Y5U, Y5S: 5 % max. at 1 V, 1 kHz Insulation resistance 1 G min. at 500 VDC, 60 s. ESD TEST METHOD 6 kV Direct Contact FAIL PASS 2 kV Direct Contact FAIL PASS FAIL 1 kV Direct Contact 4 kV Direct Contact 8 kV Direct Contact FAIL FAIL FAIL PASS 500 V Direct Contact FAIL 12 kV Air Discharge 1 kV DC 2 kV DC PASS 4 kV DC 6 kV DC 16 kV Air Discharge PASS 8 kV DC PASS < 500 V DC PASS 500 V DC FAIL PASS 12 kV AD 25 kV Air Discharge FAIL 16 kV AD PASS 25 kV AD Notes * DC means "direct contact discharge". * AC means "air discharge". * Classify the components according to the highest ESD voltage level survived during ESD testing. Revision: 29-Mar-18 Document Number: 28550 11 For technical questions, contact: cdc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AY2 Series www.vishay.com Vishay BCcomponents LEAKAGE CURRENT VS. VOLTAGE (Typical) 120 3.5 60 Hz, 25 C 100 pF 4700 pF 2.5 60 Hz, 25 C 100 3900 pF 80 3300 pF Current I (A) Current I (mA) 3.0 2.0 1.5 2200 pF 1500 pF 1.0 1000 pF 680 pF 470 pF 330 pF 220 pF 150 pF 0.5 0.0 0 68 pF 60 47 pF 40 33 pF 22 pF 20 10 pF 0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 AC Voltage VRMS AC Voltage VRMS Z () IMPEDANCE VS. FREQUENCY (Typical) 100 10 0.1 nF 1.0 nF 0.68 nF 1 2.2 nF 4.7 nF 0.1 1 10 100 1000 f (MHz) Lead configuration: length = 30 mm, lead spacing: standard, lead diameter: standard, inline crimp Note * The capacitors meet the essential requirements of "EIA 198". Unless stated otherwise all electrical values apply at an ambient temperature of 25 C 3 C, at normal atmospheric conditions. RELATED DOCUMENTS General Information www.vishay.com/doc?28536 CB Test Certificate www.vishay.com/doc?22254 VDE Marks Approval www.vishay.com/doc?22256 UL Test Certificate www.vishay.com/doc?22253 CQC Test Certificate www.vishay.com/doc?22255 SAMPLE KIT Part Number Link Revision: 29-Mar-18 AY21-KIT-HF www.vishay.com/doc?28553 Document Number: 28550 12 For technical questions, contact: cdc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: AY2222M35Y5US63L7 AY21-KIT-HF AY2151K29Y5SS63L7 AY2330K29U2JS63L7 AY2681M29Y5US63L7 AY2102M29Y5US63L7 AY2680K29Y5SS63L7 AY2471K29Y5SS63L7 AY2472M49Y5US63L7 AY2221K29Y5SS63L7 AY2220K29U2JS63L7 AY2332M41Y5US63L7 AY2101K29Y5SS63L7 AY2331K29Y5SS63L7 AY2470K29U2JS63L7 AY2152M31Y5US63L7 AY2150K29U2JS63L7 AY2100K29U2JS63L7 AY2392M43Y5US63L7 AY2103M61Y5VS63L0