Document Number: 60031
Revision 23-Nov-05
www.vishay.com
52
M
Vishay Thin Film
SURFACE MOUNT
SURFACE MOUNT
CHIPS
VISHAY THIN FILM • FRANCE +33.4.93.37.28.24 FAX: +33.4.93.37.27.31 • GERMANY +49.9287.710 FAX: +49 9287.70435 • ISRAEL +972.3.557.0945 FAX: +972.3.558.9121
• ITALY + 39.2.300.11919 FAX: +39.2.300.11999 • JAPAN +81.3.5464.6411 FAX: +81.3.5464.6433 • SINGAPORE +65.788.6668 FAX: +65.788.0988
• SWEDEN +46.8.594.70590 FAX: +46.8.594.70581 • UK +44 1953 451 274 FAX: +44 1953 457 722 • USA: (610) 407-4800 FAX: (610) 640-9081
For technical questions contact: thin-film@vishay.com
FEATURES
•Lead (Pb)-Free available
•High purity alumina substrate for high power
dissipation
•Wraparound terminations featuring a thin film
adhesion layer covered with a leach resistant
nickel barrier layer for + 150°C operating conditions
• High speed laser trimming for high volume requirements
•Ruthenium based cermet thick film for dependable
performance
• Fired-on glass passivation
•Tape & reel packaging standard; static-free waffle pack
available
•Active trim and zero ohm chips
Commercial Thick Film Chip Resistors
Actual Size
0502
CONSTRUCTION
Utilizing proven expertise in thick and thin film resistors to
satisfy your manufacturing needs, VISHAY provides a high
rel chip with the same reliability and stability found in military
grade resistors. These chips are available in the widest range
of sizes, values, and performance characteristics. High value,
high stability chips are available up to 200M ohm; consult
factory.
Resistor Overglaze
Alumina Substrate
Inner Electrode
Nickel Barrier
Solderable Coating
CASE RATING WORKING MINIMUM
SIZE (mW) VOLTAGE RESISTANCE (OHMS)
1005 250 75 10 - 25M
1010 500 75 10 - 25M
1206 330 100 10 - 25M
1505 350 100 10 - 25M
2010 1000 175 10 - 25M
2208 750 150 10 - 25M
2512 2000 200 10 - 25M
CASE RATING WORKING MINIMUM
SIZE (mW) VOLTAGE RESISTANCE (OHMS)
0402 100 25 10 - 10M
0502 100 25 10 - 25M
0504 125 40 10 - 25M
0505 125 40 10 - 25M
0603 150 40 10 - 25M
0705 200 50 10 - 25M
1002 150 50 10 - 25M
Consult factory for nominals above 25M Ohms.
TEST SPECIFICATIONS CONDITIONS
MATERIAL RUTHENIUM
Resistance Range 10 ohms to 25M ohms
Absolute TCR ± 100ppm/°C- 55°C to + 125°C
Tolerance ± 1%, ± 2%, ± 5%, ± 10%
Stability: ∆R Ratio 0.15% 2000 hrs. @ + 70°C
Operating Temperature Range - 55°C to + 150°C
STANDARD ELECTRICAL SPECIFICATIONS
ABS
TCR 100
TOL 1
TYPICAL PERFORMANCE
Available
Pb-free
RoHS*
COMPLIANT
* Pb containing terminations are not RoHS compliant, exemptions may apply
SURFACE MOUNT
www.vishay.com
53
M
Vishay Thin Film
Document Number: 60031
Revision 23-Nov-05
SURFACE MOUNT
CHIPS
VISHAY THIN FILM • FRANCE +33.4.93.37.28.24 FAX: +33.4.93.37.27.31 • GERMANY +49.9287.710 FAX: +49 9287.70435 • ISRAEL +972.3.557.0945 FAX: +972.3.558.9121
• ITALY + 39.2.300.11919 FAX: +39.2.300.11999 • JAPAN +81.3.5464.6411 FAX: +81.3.5464.6433 • SINGAPORE +65.788.6668 FAX: +65.788.0988
• SWEDEN +46.8.594.70590 FAX: +46.8.594.70581 • UK +44 1953 451 274 FAX: +44 1953 457 722 • USA: (610) 407-4800 FAX: (610) 640-9081
For technical questions contact: thin-film@vishay.com
DIMENSIONS in inches
D
W
L
T
E
Commercial Thick Film Chip Resistors
CASE SIZE TERM L W T D E
0402 B 0.042 ± 0.006 0.022 ± 0.005 0.010 to 0.033 0.010 ± 0.005 0.010 ± 0.005
0502 B 0.050 ± 0.006 0.025 ± 0.005 0.020 Max. 0.010 ± 0.005 0.010 ± 0.005
0504 B 0.050 ± 0.006 0.040 ± 0.005 0.020 Max. 0.010 ± 0.005 0.010 ± 0.005
0505 B 0.055 ± 0.006 0.050 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.015 ± 0.005
0603 B 0.064 ± 0.006 0.032 ± 0.005 0.010 to 0.033 0.010 ± 0.005 0.010 ± 0.005
0805*, 0705* B 0.080 ± 0.006 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005
1002 B 0.100 ± 0.006 0.025 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005
1005 B 0.105 ± 0.007 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005
1010 B 0.105 ± 0.007 0.100 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005
1206 B 0.126 ± 0.008 0.063 ± 0.005 0.015 to 0.033 0.020 + 0.005,- 0.010 0.020 + 0.005, - 0.010
1505 B 0.155 ± 0.007 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005
2010 B 0.209 ± 0.009 0.098 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005
2208 B 0.230 ± 0.007 0.075 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005
2512 B 0.259 ± 0.009 0.124 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005
TEST 10Ω ∆R ± (%) 100KΩ ∆R ± (%)
Thermal Shock 0.02 0.03
Short Term Overload 0.02 0.02
Low Temperature Operation 0.03 0.04
Resistance to Solder Heat 0.06 0.02
Moisture Resistance 0.10 0.08
High Temperature Exposure 0.02 0.02
100
80
60
40
20
0
0 70 125 150
Percent of Rated Power
Ambient Temperature °C
DERATING CURVE
ENVIRONMENTAL TEST
STYLE CASE SIZE TCR CHARACTERISTIC OHMIC VALUE TOLERANCE TERMINATION PACKAGE
M = High Rel 0402 K = ± 100 PPM/°CThe first 3 digits F = ± 1.0% B = Solderable T = Tape
Cermet 0502 are significant G = ± 2.0% (Solder coated &
Thick Film 0504 L = ± 200 PPM/°Cfigures and the J = ± 5.0% w/ nickel barrier) Reel
Wraparound 0505 last digit specifies K = ± 10.0%
0603 M = ± 300 PPM/°Cthe number of S = Special E = Electro- W= Waffle
0805* zeros to follow. plated Gold (Au) Pack
T = Topside 1005 S = Special e.g. N = Not
1010 0000 = zero ohms Trimmed G = Epoxy/
1206 (Specify Solderable
1505 “R” designates Limits) (Au over Ni)
2010 the decimal point.
2208 10R0 = 10 ohms W = Wirebond-
2512 able Gold (Au)
S = Lead (Pb)-Free
96.5% Sn
3.0% Ag
0.5% Cu
How to Order
Example: M0505K1003JBT is a thick film cermet wraparound chip resistor, 50 mil square, with a TCR of ±100 ppm/°C, a
value of 100K ohms, ±5% tolerance and solder coated nickel barrier terminations, on tape and reel packaging.
Lead (Pb)-Free Example:
M1206KXXXXFST
* 0705 and 0805 are the same (only use 0805 when ordering)
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
