Aptina Medical Camera Products version 1.0
2H’13
700
400 500 600
Wavelength (nm)
700
0.2
0
0.4
0.6
0.8
400 500 600
Wavelength (nm)
APTINA
0.2
0
0.4
0.6
0.8
1.2
Relative
Spectral
Response
Luminance
SNR
1000400200 800600
Scene Light Level (Lux)
10
0
20
30
40
APTINA Luminance SNR*
APTINA
*
Conditions: 18% grey target, 670 nm IRCF, 6500K, 0.9 lens trans, 15fps, f/2.8, 100 saturation
350 750550 950
Wavelength (nm)
1150
10
0
20
30
40
50
60
Strong Quantum Eciency (QE) performance
in Both Visible and NIR Range
Quantum
Eciency
%
Aptina Medical
Imaging Solutions
MEDICAL IMAGING
Aptina’s portfolio of CMOS medical
imaging solutions combined with
unparalleled customer service enable
medical device manufacturers to
develop advanced tools for the market’s
challenging growth areas, such as Point
of Care (POC) devices, DNA sequencing,
endoscopy, etc.
Aptina’s advantages in extreme low light
sensitivity, small package size, low power
consumption and high speed sensing
allow our OEMs to lower costs while
increasing accuracy and performance.
Advances in DNA sequencing
technologies during the past two
decades have driven breathtaking break
throughs in our understanding of biology
and biomedicine. From human disease,
to microbial ecology, to evolution, Aptina
is excited to contribute powerful imaging
tools to scientists and researchers
bringing medical diagnostics to market.
Aptina pixels provide a spectral response which produces
higher color fidelity through lower cross talk.
Low Power
Consumption
High Noise
Immunity
High Speed
Sensing
Image
Brightness
and Clarity
Small
Pixel Size
Low Light
Sensitivity
700
400 500 600
Wavelength (nm)
700
0.2
0
0.4
0.6
0.8
400 500 600
Wavelength (nm)
APTINA
0.2
0
0.4
0.6
0.8
1.2
Relative
Spectral
Response
Luminance
SNR
1000400200 800600
Scene Light Level (Lux)
10
0
20
30
40
APTINA Luminance SNR*
APTINA
*
Conditions: 18% grey target, 670 nm IRCF, 6500K, 0.9 lens trans, 15fps, f/2.8, 100 saturation
350 750550 950
Wavelength (nm)
1150
10
0
20
30
40
50
60
Strong Quantum Eciency (QE) performance
in Both Visible and NIR Range
Quantum
Eciency
%
Aptina Pixel Size ranges from
1.1µm to 6.6µm allowing for
extremely small size pixels in
high resolution
With the increased quantum eciency, reduced average cross talk, and a large
improvement to spatial noise Aptina Sensor performance has 22% higher peak
luminance SNR and achieves the same luminance SNR with 37% less light
2.0 µm
7.5 µm
37% Less light for
same Lum-SNR
22% Higher
Peak Lum-SNR
2H’13 Page
Aptina Medical Imaging Solutions version 1.1
PRODUCT MT9M114 MT9V115 MT9V124 AS0260 MT9V024/34 AR0140CS AR0130
Sensor/SOC
SOC SOC SOC SOC Sensor Sensor Sensor
Resolution
1.2 MP VGA VGA 2.1 MP VGA 1.2 MP 1.2 MP
Optical Format
1/6" 1/13" 1/13" 1/6" 1/3" 1/4" 1/3"
Frame Rate*
1.2 MP
30 fps,
VGA 75 fps
30 fps 30 fps 30 fps 8 MP (4:3)
60 fps
1.2 MP 45 fps,
720p60
1.2 MP 45 fps,
720p60
Pixel Size
1.9 µm 1.75 µm 1.75 µm 1.4 µm 1.4 µm 3.0 µm 3.75 µm
Pixel Technology
––– A-Pix™
technology
A-PixHS™
technology
DR-Pix™
technology
DR-Pix™
technology
Shutter Type 2
ERS ERS ERS ERS GS ERS ERS
CFA
Color Color Color Color Color and Mono Color Color and Mono
CRA (Degree)
27.7 24 24 28 11.4 0 0
Dynamic
Range
70.8 dB 58 dB 58 dB 65 dB 100 dB
iHDR
96 dB
2 exposure
83.5 dB
Linear
Signal-to-Noise
37 dB 33.4 dB 33.4 dB 33 dB 36 dB 41 dB 44 dB
Responsivity
2.24 V/lux-sec 1.65 V/lux-sec 1.65 V/lux-sec 0.64 V/lux-sec 4.8 V/lux-sec 6.5 V/lux-sec 4.0 V/lux-sec
Input Clock
6 - 54 MHz 18 - 44 MHz 18 - 44 MHz 6-54 MHz 6 - 27 MHz 6-50 MHz 6-50 MHz
Output Clock
96 MHz 22 MHz N/A 96 MHz 336 MP/s
74.25 MHz
(parallel),
148.5 MP/s
(HiSPi™)
74.25 MHz
(parallel),
148.5 MP/s
(HiSPi™)
Interface
1-lane MIPI,
8-bit parallel 8-bit parallel 12-bit LVDS 2-lane MIPI,
12-bit parallel 10-bit LVDS 4-lane HiSPI,
12-bit parallel
4-lane HiSPI,
12-bit parallel
Operating Temp.
–30ºC to
+70ºC –30ºC to +70ºC –30ºC to +70ºC –
30ºC to +70ºC
–
30ºC to +70ºC
–
30ºC to +85ºC
–
30ºC to +85ºC
Package(s)
4.65x3.85 mm2
55-ball CSP
2.69x2.69 mm2
25-ball CSP
2.69x2.69 mm2
25-ball CSP
6.005 mm
2
4.158 mm
2
CSP
10x10 mm
2
48-pin CLCC
9x9 mm
2
63-ball iBGA,
10x10 mm
2
48-pin iLCC
9x9 mm
2
63-ball iBGA,
10x10 mm
2
48-pin iLCC
2
2ERS: Rolling Shutter GS: Global Shutter GRR: Global Reset Release
Aptina Medical Imaging Solutions version 1.1
Page
2H’13
PRODUCT AR0134 AR0331 AR0330 MT9P004 MT9P006 MT9J003
Sensor/SOC
Sensor Sensor Sensor Sensor Sensor
Sensor
Resolution
1.2 MP 3.1 MP 3.5 MP 5 MP 5 MP
10 MP
Optical Format
1/3" 1/3" 1/3" 1/3.2" 1/2.5"
1/2.3”
Frame Rate*
1.2 MP 54 fps,
720p60 1080p60 1080p60 5 MP 15 fps,
1080p30
5MP 15 fps,
720p60
10 MP 15 fps
1080p60,
Pixel Size
3.75 µm 2.2 µm 2.2 µm 1.75 µm 2.2 µm
1.67
µm
Pixel Technology
DR-Pix™
technology
A-Pix™
technology
A-Pix™
technology
A-Pix™
technology –
–
Shutter Type GS ERS, GRR ERS, GRR ERS, GRR ERS, GRR ERS, GRR
CFA
Color, Mono Color Color Color Color
Color,
Mono
CRA (Degree)
0.25 0 0, 12, 21 11.4, 25 7, 27
0, 13.4
Dynamic
Range
64 dB 100 dB
2 exp. ALTM 69.5 dB 65.4 dB 67.74 dB
65.2 dB
Signal-to-Noise
38 dB 39 dB 39.6 dB 38 dB 38.5 dB
34 dB
Responsivity
6.1 V/lux-sec 1.9 V/lux-sec 2.0 V/lux-sec 0.85 V/lux-sec 1.8 V/lux-sec
0.31V/lux-sec
Input Clock
6-50 MHz 6-48 MHz 6-27 MHz 2-64 MHz 6-96 MHz
6-48 MHz
Output Clock
74.25 MHz
(parallel),
148.5 MP/s
(HiSPi™)
74.25 MHz
(parallel),
148.5 MP/s
(HiSPi™)
96 MP/s (parallel),
196 MP/s
(HiSPi™)
96 MHz 96 MP/s
80 MP/s
Interface
12-bit parallel 4-lane HiSPi,
12-bit parallel
2-lane MIPI, 12-
bit parallel
2-lane MIPI,
12-bit parallel 12-bit parallel
4-lane HiSPi,
12-bit parallel
Operating Temp.
–30ºC to +70ºC –30ºC to +85ºC –30ºC to +70ºC –30ºC to +70ºC –30ºC to +70ºC –
30C to +70C
Package(s)
10x10
mm
2
48-pin iLCC,
11.43x11.43 mm2
48-pin PLCC
9.5x9.5 mm
2
iBGA,
10x10 mm
2
48-pin iLCC
11.43x11.43 mm
2
48-pin CLCC,
6.3x6.6 mm
2
CSP
6.63 mm
2
6.22 mm
2
CSP
10x10 mm
2
48-pin iLCC
10x10 mm
2
48-pin iLCC,
12x12 mm
2
48-pin PLCC
3
*Frame rate is at full resolution, unless otherwise noted.
Please contact medical@aptina.com for additional product information.
2H’13
Aptina Medical Imaging Solutions version 1.1
©2013 Aptina Imaging Corporation. All rights reserved. Products are warranted only to meet Aptina’s production data sheet specifications.
Products and specifications are subject to change without notice. Aptina, the Aptina logo, A-Pix, A-PixHS, DR-Pix, Clarity+, and HiSPi are
trademarks of Aptina Imaging Corporation. All other trademarks are the property of their respective owners.
About Aptina
Aptina is a global provider of intelligent imaging solutions. Aptina has created
unique innovations with image sensor technologies such as Aptina Clarity+™ to
deliver high-quality, rich images in challenging environments. Aptina patented
imaging solutions are in leading consumer electronics devices like smartphones,
tablets, laptops and digital cameras, as well as industry-specific solutions for
automotive, surveillance, video conferencing, scanning, medical and gaming.
Learn more at www.aptina.com.
3080 North 1st Street
San Jose, CA 95134
medical@aptina.com
www.aptina.com
GETTING STARTED WITH APTINA
DevSuite
1. Register on www.aptina.com.
a. To register, visit our site, click on the top right button
that states “Register”.
b. Submit your contact information. If you have an NDA
please note this.
c. Shortly, an Aptina representative will grant you access
to Aptina website collateral.
Demo Kit Contents Include:
1. Aptina headboard
2. Demo camera board with
USB 3.0 connector
3. USB 3.0 cable
4. Tripod stand and camera
tripod
Demo Kit Headboard
Headboard Contents Include:
1. Aptina sensor
2. Lens mount and lens
DevSuite includes the tools for
1. Live image tuning
2. Real-Time register access
3. Image and video capture
4. Image analysis
2. If the sensor you are interested in is not on the website:
a. Contact your local Aptina sales representative or
distributor for information.
b. Our distributors and sales representatives are listed
on our main webpage under the section “How to Buy”.
3. To evaluate, purchase an Aptina “Demo Kit” or “Head-
board” from your distributor.
4. Please contact medical@aptina.com for more
information.
