________________________________________________________________________________________________________________ ●
25
XC62G Series Positive Voltage Regulators
General Description Features
The XC62G series are highly precise, low power consumption,
positive voltage regulators, manufactured using CMOS and
laser trimming technologies. The series achieves high output
currents with low input-output voltage differentials, and con-
sists of a high precision voltage reference, an error correction
circuit, and an output driver with current limitation.
With good transient responses, output remains stable even
during load changes. Also, having high ripple rejection ratios,
the series can be used with low power supply noise.
The CE input enables the output to be turned off, resulting in
reduced power consumption.
SOT-25 (150mW) and SOT-89-5 (500mW) packages are avail-
able.
With regards to the CE function, as well as the positive logic
XC62GR series, a negative logic XC62GP series (custom) is
also available.
Maximum Output Current: 150mA
(within Maximum power dissipation, Vout=3.0V)
Output Voltage Range: 2.1V to 5.0V in 0.1V increments
Highly Accurate: Setup voltage ± 2%
( ± 1% for semi-custom products )
Low power consumption:
TYP 13
µ
A [ Vout=3.0V ],
TYP 23
µ
A [ Vout=3.0V semi-custom, high-speed versions ],
TYP 0.1
µ
A [ Stand-by mode ]
Output voltage temperature characteristics: TYP± 100ppm/°C
Line regulation: TYP 0.2%/V
Ultra small package: SOT-25 (150mW) mini-mold
: SOT-89-5 (500mW) power-mini-mold
Pin Configuration Pin Assignment
123
SOT-25
(TOP VIEW)
4
5
VOUT
VSS
(NC)
VIN CE
SOT-89-5
(TOP VIEW)
23
CE
VSS
VIN
1
54
(NC)
VOUT PIN NUMBER
SOT-25 SOT-89-5
PIN
NAME FUNCTION
14VSS Ground
22VIN Supply Voltage Input
3 3 CE Chip Enable
4 1 (NC) No Connection
55VOUT Regulated Output Voltage
Block Diagram
VOUT
VSS
Current
Limit +
-
VIN
ＣＥ Voltage
Reference
Output
Control
Ordering Information
XC62G×××××××
↑ ↑ ↑↑↑↑
abcdef
DESIGNATOR DESCRIPTION DESIGNATOR DESCRIPTION
a
True Logic Level at CE Pin :
R = Positive
P = Negative ( Custom )
b
Output Voltage :
30 = 3.0V
50 = 5.0V
e
Package Type
M = SOT-25
P = SOT-89-5
c
Response :
1 = Standard
2 = High Speed ( Semi-Custom )
d
Output Voltage Accuracy :
1 = ± 1.0% ( Semi-Custom )
2 = ± 2.0%
f
Device Orientation :
R = Embossed Tape ( Right )
L = Embossed Tape ( Left )
DETAILS
