________________________________________________________________________________________________________________ XC62G Series Positive Voltage Regulators General Description Features Maximum Output Current: 150mA (within Maximum power dissipation, Vout=3.0V) Output Voltage Range: 2.1V to 5.0V in 0.1V increments Highly Accurate: Setup voltage 2% ( 1% for semi-custom products ) Low power consumption: TYP 13A [ Vout=3.0V ], TYP 23A [ Vout=3.0V semi-custom, high-speed versions ], TYP 0.1A [ Stand-by mode ] Output voltage temperature characteristics: TYP 100ppm/C Line regulation: TYP 0.2%/V Ultra small package: SOT-25 (150mW) mini-mold : SOT-89-5 (500mW) power-mini-mold The XC62G series are highly precise, low power consumption, positive voltage regulators, manufactured using CMOS and laser trimming technologies. The series achieves high output currents with low input-output voltage differentials, and consists of a high precision voltage reference, an error correction circuit, and an output driver with current limitation. With good transient responses, output remains stable even during load changes. Also, having high ripple rejection ratios, the series can be used with low power supply noise. The CE input enables the output to be turned off, resulting in reduced power consumption. SOT-25 (150mW) and SOT-89-5 (500mW) packages are available. With regards to the CE function, as well as the positive logic XC62GR series, a negative logic XC62GP series (custom) is also available. Pin Configuration Pin Assignment VOUT 5 (NC) 4 VOUT 5 DETAILS 3 2 1 VSS VIN CE 1 (NC) SOT-25 (TOP VIEW) VSS 4 PIN NUMBER SOT-25 SOT-89-5 PIN NAME FUNCTION 1 4 VSS Ground 2 2 VIN Supply Voltage Input 3 3 CE Chip Enable 4 1 (NC) No Connection 5 5 VOUT Regulated Output Voltage 2 3 CE VIN SOT-89-5 (TOP VIEW) Block Diagram VOUT VIN Current Limit + - Output Control Voltage Reference VSS Ordering Information XC62Gxxxxxxx a b cde f DESIGNATOR a b c d DESCRIPTION True Logic Level at CE Pin : R = Positive P = Negative ( Custom ) Output Voltage : 30 = 3.0V 50 = 5.0V Response : 1 = Standard 2 = High Speed ( Semi-Custom ) Output Voltage Accuracy : 1 = 1.0% ( Semi-Custom ) 2 = 2.0% DESIGNATOR DESCRIPTION e Package Type M = SOT-25 P = SOT-89-5 f Device Orientation : R = Embossed Tape ( Right ) L = Embossed Tape ( Left ) 25