PRODUCT DATASHEET
BusBoard Prototype Systems
www.BusBoard.com "Faster ways to build prototypes"
REV 5
BPS-DAT-(SA)-0001 Rev 5 Datasheet
© 2015 BusBoard Prototype Systems Ltd. "BusBoard", "BPS" and the BPS logo are trademarks of BusBoard Prototype Systems. All rights reserved.
The SA120 and SA180 are low-profile adhesive standoffs with 0.120" and 0.180" standoff
heights, respectively. It securely attaches your PCB to a flat surface The post inserts into a 0.125”
mounting hole. The post includes a locking tab that secures the PCB when inserted. It can be used
with 1/16” or 1/32” thick PCBs.
The 0.6 x 0.6” square base is offset to allow the base to be underneath the board when the
mounting hole is close the to PCB edge. The offset base provides a large sticking surface while
permitting the PCB to be mounted in tight spaces or close to walls. This can be useful when
working with small enclosures.
High-quality 3M brand double-sided tape secures the standoff to a flat surface.
Adhesive Standoff Details:
Related Products:
PR2H1 ProtoBoard SB1660 Solderable
PC BreadBoard
SP3-100x100-G
Size 3 SMTpads
SB404 Solderable
PC BreadBoard