DATA SHEET SKY65313-21: 900 MHz Transmit/Receive Front-End Module Applications Description Automated meter reading The Skyworks SKY65313-21 is a high-performance, transmit/receive (T/R) front-end module (FEM). The device provides a complete T/R chain with T/R switches. Advanced metering infrastructure ISM systems The device transmit chain features +30.5 dBm output power and a 40 percent power-added efficiency (PAE). GND 1 CTL1 VDD2 Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04-0074. The device package and pinout are shown in Figure 1. A block diagram of the SKY65313-21 is shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. 28 27 26 25 24 23 22 GND 2 21 GND CTL2 3 20 TX CTL3 4 19 GND VPC 5 18 RX3 GND 6 17 VCC_RX ANT 7 16 VDD1 GND 8 15 GND 9 10 11 12 13 14 GND Small footprint, MCM (28-pin, 6 x 6 mm) package (MSL3, 260 C per JEDEC J-STD-020) VCC_TX1 Shutdown mode The device is mounted in a 28-pin, 6 x 6 mm Multi-Chip Module (MCM) Surface-Mounted Technology (SMT) package, which allows for a highly manufacturable low-cost solution. RX2 All RF ports internally DC blocked VCC_TX2 Internal RF match and bias circuits The module also has a shut-down mode and LNA bypass mode to minimize power consumption. GND Integrated control logic VCC_TX3 LNA bypass mode GND Receive path NF <1.9 dB GND Analog power control RX1 High efficiency PA The device receive chain features a Low Noise Amplifier (LNA) with a 1.4 dB noise figure (NF) and 16.6 dB gain. The cascaded NF and gain, taking into account the 0.5 dB insertion loss transmit/receive antenna switch, are 1.9 dB and 16.1 dB, respectively, which makes the SKY65313-21 ideal for medium power microwave links such as 900 MHz Industrial, Scientific and Medical (ISM) band applications. GND Transmit output power > +30.5 dBm GND Features S2126 Figure 1. SKY65313-21 Pinout (Top View) Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 202121B * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * March 15, 2016 1 DATA SHEET * SKY65313-21: T/R FRONT-END MODULE Control Logic Digital Control VPC Matching Network PA Transmit Harmonic Filter Matching Network Antenna RX1 Matching Network LNA RX2 RX3 S2124 Figure 2. SKY65313-21 Block Diagram Table 1. SKY65313-21 Signal Descriptions Pin Name Description Pin Name Description 1 GND Ground 15 GND Ground 2 CTL1 Transmit/receive mode digital control input 16 VDD1 3.3 V power supply 3 CTL2 Shutdown mode digital control input 17 VCC_RX 3.3 V power supply 4 CTL3 Receive bypass mode digital control input 18 RX3 LNA and bypass switch output port. Internally matched to 50 . 5 VPC Transmit output power analog control voltage input 19 GND Ground 6 GND Ground 20 TX PA input port. Internally matched to 50 . 7 ANT Antenna switch common port. Internally matched to 50 . 21 GND Ground 8 GND Ground 22 GND Ground 9 GND Ground 23 VDD2 4.0 V power supply 10 RX1 Receive arm of antenna switch. Internally matched to 50 . 24 VCC_TX1 4.0 V power supply 11 GND Ground 25 VCC_TX2 4.0 V power supply 12 GND Ground 26 VCC_TX3 4.0 V power supply 13 RX2 LNA and bypass switch input port 27 GND Ground 14 GND Ground 28 GND Ground Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 2 March 15, 2016 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 202121B DATA SHEET * SKY65313-21: T/R FRONT-END MODULE Technical Description Receive Path The SKY65313-21 consists of a complete T/R chain with T/R switches contained in the module. A single-pole, double-throw (SPDT) switch selects between the receive and transmit paths. The module has a shut-down mode to minimize power consumption. The receive path contains an LNA with bypass switch. The LNA impedance matching networks are internal to the module and have been optimized for a low NF while maintaining good return losses into a 50 source and load impedance. The receive arm of the SPDT switch and the LNA input are connected to module pins to allow an external filter to be inserted into the receive path. Three digital input pins (CTL1, CTL2, and CTL3) are used to select between transmit, receive, receive bypass, or shutdown mode. Operation Mode Control Transmit Path The four SKY65313-21 operating modes are controlled by the three digital pins: CTL1, CTL2, and CTL3 (pins 2, 3, and 4, respectively). The control logic truth table is provided in Table 2. The transmit path contains a power amplifier (PA) optimized for saturated performance. The PA output is internally matched for optimum output power and efficiency into a 50 load impedance. The PA output is passed through an harmonic filter before being fed through the SPDT switch. The PA input provides a good return loss into a 50 source impedance. Electrical and Mechanical Specifications The absolute maximum ratings of the SKY65313-21 are provided in Table 3. Recommended operating conditions are specified in Table 4. Electrical specifications are provided in Tables 5, 6, and 7. Transmit output power is controlled by the VPC pin, which is normally set to 2.25 V DC voltage. The nominal DC input impedance into the VPC pin is 50 k. Typical performance characteristics of the SKY65313-21 are illustrated in Figures 3 through 22. Table 2. SKY65313-21 Operating Modes Truth Table1 Control Voltage Internal States CTL1 (Pin 2) CTL2 (Pin 3) CTL3 (Pin 4) PA LNA LNA Bypass Switch T/R Switch Transmit 1 1 X On Off Open Transmit Receive 0 1 0 Off On Open RX1 Receive Bypass 0 1 1 Off Off Through RX1 Shutdown (Note 2) X 0 X Off Off Open RX1 Operating Mode 1 See Recommended Operating Conditions Table for logic 0 and 1 characteristics. "X" = don't care state, defined as a valid state of logic 1 or 0. 2 In the high state, CTL1, CTL2, and CTL3 have an input current of 33 A due to an internal 100 k pulldown. In the shutdown mode, for the lowest leakage current, the high state is not recommended for CTL1 and CTL3. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 202121B * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * March 15, 2016 3 DATA SHEET * SKY65313-21 T/R FRONT-END MODULE Table 3. SKY65313-21 Absolute Maximum Ratings1 Parameter Symbol Minimum Maximum Units -0.3 +5.0 V 20 mA -0.3 +5.0 V 1.6 A LNA supply voltage VCC_RX LNA supply current ICC1 PA supply voltage VCC_TX1/2/3 PA supply current ICC2 Digital supply voltage VDD1 -0.5 +5.5 V Digital supply voltage VDD2 -0.5 +5.5 V Digital control voltage (CTL1, CTL2, CTL3) VCTL -0.5 VDD1 + 0.3 V Transmit output power control voltage (VPC) VPC -0.3 +5.0 V Receive RF input power (RX2) PIN_RX2 +5 dBm Receive RF input power (ANT) PIN_ANT +33 dBm Transmit RF input power PIN_TX +15 dBm Operating case temperature TC -40 +85 C Storage temperature TSTG -55 +150 C Junction temperature TJ +150 C T/R port load VSWR in transmit mode VSWR 10:1 - 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Nominal thermal resistance, junction to case, is 18 C/W. CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 4. SKY65313-21 Recommended Operating Conditions Parameter Frequency range Symbol Minimum f 860 LNA supply voltage VCC_RX 3.0 Digital supply voltage1 VDD1 3.3 Maximum Units 960 MHz 3.6 VCC_RX PA supply voltage VCC_TX1/2/3 Digital supply voltage1 VDD2 Digital input voltage, logic 0 (CTL1, CTL2, CTL3) VCTL 0 Digital input voltage, logic 1 (CTL1, CTL2, CTL3) VCTL 1.6 Transmit output power control voltage (VPC) VPC 0 Receive RF input power (RX2) PIN_RX2 Transmit RF input power (TX) PIN_TXIN Transmit duty cycle Typical 3.0 4.0 4.4 VCC_TX1/2/3 2.25 +10 V V 0.7 V VDD1 V 2.50 V -15 dBm +13 dBm 50 % 1 VDD1 and VDD2 are diode-coupled together with a typical turn-on voltage of 3.2 V. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 4 V V March 15, 2016 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 202121B DATA SHEET * SKY65313-21: T/R FRONT-END MODULE Table 5. SKY65313-21 DC Electrical Specifications1 (VCC_RX = VDD1 = 3.0 V to 3.6 V, VCC_TX1/2/3 = VDD2 = 3.6 V to 4.4 V, TC = -40 C to +85 C, No RF Input Power, Unless Otherwise Noted) Parameter Symbol Quiescent current, receive mode2 IQ_RX Quiescent current, receive bypass mode2 IQ_BYP Test Condition Min Typical Max Units 7.5 12.6 20.0 mA 46 90 A VDD1 quiescent current, transmit mode IQ_VDD1 25 30 mA VCC_TX1/2/3/quiescent current, transmit mode IQ_TXIN TC = 25 C, VCC_TX1/2/3 = 4 V, VPC = 2.25 V 55 88 mA VCC_TX1/2/3/ operating current, transmit mode IOP_TXIN PIN = +10 dBm, @ 902 to 928 MHz, VPC = 2.25 V 655 826 mA VCC_RX quiescent current, shudown mode2, 3 IQ_SDVCC_RX 0.01 A VCC_TX1/2/3 quiescent current, shutdown mode2, 3 IQ_SDVCC_TX1, IQ_SDVCC_TX2, IQ_SDVCC_TX3 0.03 A Digital input current, logic3 IH 33 A Digital input current, logic 03 IL 0 A 1 Performance is guaranteed only under the conditions listed in this table. 2 Total module power supply current. 3Not production tested. Table 6. SKY65313-21 Electrical Specifications: Receive and Receive Bypass Mode (1 of 2)1 (VCC_RX = VDD1 = 3.0 V to 3.6 V, VCC_TX1/2/3 = VDD2 = 3.6 V to 4.4 V, TC = -40 C to +85 C, f = 902 to 928 MHz, 50 Source and Load Impedance, CW Input, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units 15.6 16.6 18.3 dB 1.4 1.8 dB Receive Mode: RX2 to Receive Output Path Small signal gain GLNA Noise figure NFLNA TC = 25 C, VCC_RX = 3.3 V Noise figure variation over temperature NFTEMP 0.25 dB 1 dB input compression point IP1dBLNA 1 dB gain compression -13 -11 dBm Third order input intercept point IIP3LNA PIN = -30 dBm/tone, 200 kHz spacing -3.5 0 dBm Input return loss |S11|LNA 8.0 10.7 dB Output return loss |S22|LNA 10.0 13.6 dB Reverse isolation |S12|LNA 20 22 dB Non-harmonic spurious2, 3 PSPUR_LNA Transition time2 TLNA VSWR 10:1, all phases -50 dBm s 0.5 Receive Bypass Mode: RX2 to Receive Output Path Insertion loss LBYP 3 4 dB 1 dB input compression point IP1dBBYP 1 dB gain compression +15 +16 dBm Third order input intercept point IIP3BYP PIN = -30 dBm/tone, 200 kHz spacing +27 +30 dBm Input return loss |S11|BYP 12 15 dB Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 202121B * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * March 15, 2016 5 DATA SHEET * SKY65313-21 T/R FRONT-END MODULE Table 6. SKY65313-21 Electrical Specifications: Receive and Receive Bypass Mode (2 of 2)1 (VCC_RX = VDD1 = 3.0 V to 3.6 V, VCC_TX1/2/3 = VDD2 = 3.6 V to 4.4 V, TC = -40 C to +85 C, f = 902 to 928 MHz, 50 Source and Load Impedance, CW Input, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units Receive Bypass Mode: RX2 to Receive Output Path (continued) Output return loss |S22|BYP Transition time2 TBYP 12 22 dB 0.5 s Receive and Receive Bypass Mode: ANT to RX1 Path Insertion loss LANT 0.5 0.9 dB 1 dB input compression point2 IP1dBANT 1 dB gain compression +35 dBm Third order input intercept point2 IIP3ANT PIN = -30 dBm/tone, 200 kHz spacing +50 dBm Input return loss |S11|ANT 12 15 dB Output return loss |S22|ANT 12 15 dB Transition time (Note 2) TANT 0.5 s 1 Performance is guaranteed only under the conditions listed in this table. 2 Not production tested. 3 Measurement performed with spectrum analyzer RBW = 100 kHz for frequencies < 1 GHz and RBW = 1 MHz for frequencies between 1 GHz and 10 GHz. Table 7. SKY65313-21 Electrical Specifications: Transmit Mode (1 of 2)1 (VCC_RX = VDD1 = 3.0 V to 3.6 V, VCC_TX2 = VDD2 = 3.6 V to 4.4 V, TC = -40 C to +85 C, f = 902 to 928 MHz, 50 Source and Load Impedance, CW Input, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units +30.0 +30.5 dBm TXIN to ANT Path Saturated output power POUT PIN = +10 dBm, TC = 25 C, VCC_TX1/2/3 = 4.0 V, VPC = 2.25 V Output power variation over supply voltage PIN = +10 dBm, VPC = 2.25 V 0.8 dB Output power variation over temperature PIN = +10 dBm, VPC = 2.25 V 0.15 dB 50 dB % 40 Output power control PCTL PIN = +10 dBm, VPC = 0 V to 2.7 V (Note 2) Power-added efficiency PAE PIN = +10 dBm 41 2 harmonic 2fo PIN = +10 dBm -36 -20 dBc 3rd harmonic 3fo PIN = +10 dBm -62 -58 dBc 4fo PIN = +10 dBm -76 -66 dBc 5 harmonic 5fo PIN = +10 dBm -78 -70 dBc 6th - 10th harmonics3 6fo - 10fo PIN = +10 dBm -70 dBc Input return loss |S11|TX PIN = +10 dBm, TC = 25 C, VCC_TX1/2/3 = 4.0 V, VPC = 2.25 V Output impedance4 ZOUT_TX PIN = +10 dBm Non-harmonic spurious4, 5 PSPUR_TX VSWR 10:1, all phases Transition time4 TTX nd th 4 harmonic th 10 16 dB 39-j46 -50 0.5 Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 6 March 15, 2016 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 202121B dBm s DATA SHEET * SKY65313-21: T/R FRONT-END MODULE Table 7. SKY65313-21 Electrical Specifications: Transmit Mode (2 of 2)1 (VCC_RX = VDD1 = 3.0 V to 3.6 V, VCC_TX2 = VDD2 = 3.6 V to 4.4 V, TC = -40 C to +85 C, f = 902 to 928 MHz, 50 Source and Load Impedance, CW Input, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical 18 23 Max Units ANT to RX1 Path Isolation |S21|ANT dB 1 Performance is guaranteed only under the conditions listed in this table. 2 Output power control is the difference between the output power at VPC = 2.25 V and VPC = 0 V. 3 Only the 2nd to 5th harmonics have been production tested. The 6th to 10th harmonics are characterized only. 4 Not production tested. 5 Measurement performed with spectrum analyzer RBW = 100 kHz for frequencies < 1 GHz and RBW = 1 MHz for frequencies between 1 GHz and 10 GHz. Typical Performance Characteristics +31.5 PA Saturated Output Power (dBm) PA Saturated Output Power (dBm) +31.5 -40 C +25 C +85 C +31.0 +30.5 +30.0 +29.5 902 915 3.6 V 4.0 V 4.4 V +31.0 +30.5 +30.0 +29.5 902 928 915 Frequency (MHz) Figure 3. PA Saturated Output Power vs Frequency Over Temperature (VCC_TX/1/2/3 = VDD2 = 4.0 V, VDD1 = VCC_RX = 3.3 V, PIN = +10 dBm, VPC = 2.25 V) Figure 4. PA Saturated Output Power vs Frequency Over VCC_TX/1/2/3 (VDD1 = VCC_RX = 3.3 V, TC = 25 C, PIN = +10 dBm, VPC = 2.25 V) 32 PA Output Power (dBm) -40 C +25 C +85 C 30 PA Gain (dB) 28 26 24 22 20 18 +18 +20 +22 +24 +26 928 Frequency (MHz) +28 +30 +32 PA Output Power (dBm) Figure 5. PA Gain vs Output Power Over Temperature (VCC_TX/1/2/3 = VDD2 = 4.0 V, VDD1 = VCC_RX = 3.3 V, f = 915 MHz, VPC = 2.25 V) +35 +30 +25 +20 +15 +10 +5 0 -5 -10 -15 -20 -25 -40 C +25 C +85 C 0 0.5 1.0 1.5 2.0 2.5 VPC (V) Figure 6. PA Output Power vs VPC Over Temperature (VCC_TX/1/2/3 = VDD2 = 4.0 V, VDD1 = VCC_RX = 3.3 V, f = 915 MHz, PIN = +10 dBm) Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 202121B * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * March 15, 2016 7 800 800 700 700 600 500 400 300 -40 C +25 C +85 C 200 PA Operating Current (mA) PA Operating Current (mA) DATA SHEET * SKY65313-21: T/R FRONT-END MODULE 100 500 400 300 0 +10 +12 +14 +16 +18 +20 +22 +24 +26 +28 +30 +32 0 +10 +12 +14 +16 +18 +20 +22 +24 +26 +28 +30 +32 PA Output Power (dBm) PA Output Power (dBm) Figure 8. PA Operating Current vs Output Power Over VCC_TX/1/2/3 (VDD1 = VCC_RX = 3.3 V, TC = 25 C, f = 915 MHz, VPC = 2.25 V) -26 -58 3.6 V 4.0 V 4.4 V -30 -32 -34 -36 -38 -40 -42 -44 -46 902 915 -60 -61 -62 -63 -64 -65 -66 -67 -68 902 928 Frequency (MHz) 915 Figure 10. PA 3rd Harmonic vs Frequency Over VCC_TX1/2/3 (VDD1 = VCC_RX = 3.3 V, TC = 25 C, PIN = +10 dBm VPC = 2.25 V) -71 -73 3.6 V 4.0 V 4.4 V -73 -74 -75 -76 -77 -78 -79 915 3.6 V 4.0 V 4.4 V -74 PA 5th Harmonic (dBc) -72 928 Frequency (MHz) Figure 11. PA 4th Harmonic vs Frequency Over VCC_TX1/2/3 (VDD1 = VCC_RX = 3.3 V, TC = 25 C, PIN = +10 dBm VPC = 2.25 V) -75 -76 -77 -78 -79 -80 -81 -82 -83 902 915 928 Frequency (MHz) Figure 12. PA 5th Harmonic vs Frequency Over VCC_TX1/2/3 (VDD1 = VCC_RX = 3.3 V, TC = 25 C, PIN = +10 dBm VPC = 2.25 V) Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 8 928 Frequency (MHz) Figure 9. PA 2nd Harmonic vs Frequency Over VCC_TX1/2/3 (VDD1 = VCC_RX = 3.3 V, TC = 25 C, PIN = +10 dBm VPC = 2.25 V) -80 -81 902 3.6 V 4.0 V 4.4 V -59 PA 3rd Harmonic (dBc) -28 PA 4th Harmonic (dBc) 3.6 V 4.0 V 4.4 V 200 100 Figure 7. PA Operating Current vs Output Power Over Temperature (VCC_TX/1/2/3 = VDD2 = 4.0 V, VDD1 = VCC_RX = 3.3 V, f = 915 MHz, VPC = 2.25 V) PA 2nd Harmonic (dBc) 600 March 15, 2016 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 202121B DATA SHEET * SKY65313-21: T/R FRONT-END MODULE 18.0 18.0 -40 C +25 C +85 C 17.0 16.5 16.0 15.5 15.0 902 17.0 16.5 16.0 15.5 915 15.0 902 928 Frequency (MHz) +3 -40 C +25 C +85 C +2 +1 LNA IIP3 (dBm) LNA IIP3 (dBm) +2 0 -1 -2 3.0 V 3.3 V 3.6 V +1 0 -1 -2 915 -3 902 928 Frequency (MHz) 928 Figure 16. LNA IIP3 vs Frequency Over VCC_RX (VCC_TX/1/2/3 = VDD2 = 4.0 V, TC = 25 C) 1.8 1.8 -40 C +25 C +85 C 1.7 915 Frequency (MHz) Figure 15. LNA IIP3 vs Frequency Over Temperature (VCC_TX/1/2/3 = VDD2 = 4.0 V, TC = 25 C) 3.0 V 3.3 V 3.6 V 1.7 1.6 LNA Noise Figure (dB) LNA Noise Figure (dB) 928 Figure 14. LNA Gain vs Frequency Over VCC_RX (VCC_TX/1/2/3 = VDD2 = 4.0 V, TC = 25 C) +3 1.5 1.4 1.3 1.2 1.1 1.0 902 915 Frequency (MHz) Figure 13. LNA Gain vs Frequency Over Temperature (VCC_TX/1/2/3 = VDD2 = 4.0 V, VDD1 = VCC_RX = 3.3 V) -3 902 3.0 V 3.3 V 3.6 V 17.5 LNA Gain (dB) LNA Gain (dB) 17.5 1.6 1.5 1.4 1.3 1.2 1.1 915 928 Frequency (MHz) Figure 17. LNA Noise Figure vs Frequency Over Temperature (VCC_TX/1/2/3 = VDD2 = 4.0 V, VCC_RX = VDD1 = 3.3 V) 1.0 902 915 928 Frequency (MHz) Figure 18. LNA Noise Figure vs Frequency Over VCC_RX (VCC_TX/1/2/3 = VDD2 = 4.0 V, TC = 25 C) Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 202121B * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * March 15, 2016 9 DATA SHEET * SKY65313-21: T/R FRONT-END MODULE 1.0 Antenna Switch Insertion Loss (dB) Antenna Switch Insertion Loss (dB) 1.0 -40 C +25 C +85 C 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 902 915 928 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 902 Figure 19. Antenna Switch Insertion Loss vs Frequency Over Temperature (VCC_TX/1/2/3 = VDD2 = 4.0 V, VDD1 = VCC_RX = 3.3 V) 3.5 3.3 Bypass Switch Insertion Loss (dB) -40 C +25 C +85 C 3.4 3.2 3.1 3.0 2.9 2.8 2.7 915 928 Frequency (MHz) Figure 21. Bypass Switch Insertion Loss vs Frequency Over Temperature (VCC_TX/1/2/3 = VDD2 = 4.0 V, TC = 25 C) 3.0 V 3.3 V 3.6 V 3.4 3.3 3.2 3.1 3.0 2.9 2.8 2.7 2.6 2.5 902 915 928 Frequency (MHz) Figure 22. Bypass Switch Insertion Loss vs Frequency Over VCC_RX (VCC_TX/1/2/3 = VDD2 = 4.0 V, TC = 25 C) Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 10 928 Figure 20. Antenna Switch Insertion Loss vs Frequency Over VCC_RX (VCC_TX/1/2/3 = VDD2 = 4.0 V, TC = 25 C) 3.5 Bypass Switch Insertion Loss (dB) 915 Frequency (MHz) Frequency (MHz) 2.6 2.5 902 3.0 V 3.3 V 3.6 V 0.9 March 15, 2016 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 202121B DATA SHEET * SKY65313-21: T/R FRONT-END MODULE Evaluation Board Description Package and Handling Information The SKY65313-21 Evaluation Board is used to test the performance of the SKY65313-21 T/R FEM. A typical application schematic diagram is provided in Figure 23. An Evaluation Board schematic diagram is provided in Figure 24. An assembly drawing for the Evaluation Board is shown in Figure 25. Since the device package is sensitive to moisture absorption, it is baked and vacuum packed before shipping. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. Package Dimensions The SKY65313-21 is rated to Moisture Sensitivity Level 3 (MSL3) at 260 C. It can be used for lead or lead-free soldering. For additional information, refer to Skyworks Application Note, PCB Design and SMT Assembly/Rework Guidelines for MCM-L Packages, document number 101752. A typical part marking is shown in Figure 26. The PCB layout footprint for the SKY65313-21 is provided in Figure 27. Package dimensions are shown in Figure 28, and tape and reel dimensions are provided in Figure 29. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. 220 pF 28 7 8 VCC_RX 17 VDD1 16 VDD2 GND VCC_TX1 RX3 VCC_TX2 VPC GND GND ANT GND 9 10 11 12 GND 6 CTL3 19 RX2 Antenna 6800 pF 20 CTL2 GND 5 TX VCC_TX3 Transmit Output Power Analog Control 4 13 470 pF 4700 pF 0.047 F 4.0 V Power Supply 23 21 GND 3 24 GND CTL1 RX1 Shutdown Mode Digital Control Receive Bypass Digital Control 25 22 GND 2 T/R Digital Control 26 GND GND GND 1 27 GND PA Input LNA and Bypass Switch Output 18 3.3 V Power Supply 220 pF 470 pF 15 14 Antenna Receive LNA and Bypass Switch Input S2127 Figure 23. SKY65313-21 Typical Application Schematic Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 202121B * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * March 15, 2016 11 DATA SHEET * SKY65313-21: T/R FRONT-END MODULE P1 14 13 12 11 10 9 8 7 6 5 4 3 2 1 C12 C6 C1 C8 Supply Sense Line (Narrow Trace) C1 C5 C9 C10 C7 28 C13 J1 7 8 GND VCC_RX 17 ANT VDD1 16 GND 9 50 Line VDD2 RX3 VCC_TX1 VPC VCC_TX2 GND VCC_TX3 CTL3 19 GND 20 10 11 12 GND 6 50 Line TX RX2 5 23 CTL2 GND 4 24 21 GND C2 25 GND CTL1 RX1 3 26 22 GND 2 27 GND GND GND 1 13 GND 50 Line 50 Line 18 C3 J5 J4 C4 15 14 50 Line C14 J3 J2 S2139 Figure 24. SKY65313-21 Evaluation Board Schematic Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 12 March 15, 2016 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 202121B GND GND GND VDD1 GND VDD2_SENSE VDD2 GND_SENSE CTL1 CTL2 CTL3 VPC KEY GND DATA SHEET * SKY65313-21: T/R FRONT-END MODULE P1 C8 C9 C10 C12 C5 C11 TX J5 RX3 J4 C6 C7 C2 C1 ANT C13 C14 J1 C3 C4 RX1 RX2 J2 J3 S2138 Figure 25. SKY65313-21 Evaluation Board Assembly Diagram Pin 1 Location 65313-21 XXXXXXX YYWW CC 202121-026 Skyworks Part Number Lot Code Date/Country Code: YY = Year WW = Work Week CC = Country Code Figure 26. Typical Part Marking Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 202121B * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * March 15, 2016 13 DATA SHEET * SKY65313-21: T/R FRONT-END MODULE 6.3 Stencil Aperture Size for Center Ground Pad Should be 80 to 100% (by Area) of the Solder Mask Opening 0.5 0.4 0.05 0.05 0.15 8X 0.188 6.3 16X 0.625 0.8 0.9 Stencil and Metallization Package Outline Soldermask Opening SMT Pad Detail Scale: 2X Package Outline 6X This Rotation 6X Rotated 180 6X Rotated 90 CW 6X Rotated 90 CCW 8X 0.188 16X 0.625 Stencil Aperture Top View 0.9 0.9 0.8 0.8 Package Outline 0.05 0.05 0.05 0.05 0.15 0.15 0.85 Stencil and Metallization Package Outline Stencil and Metallization Soldermask Opening Soldermask Opening SMT Pad Detail Scale: 2X SMT Pad Detail Scale: 2X 1X This Rotation 1X Rotated 180 1X This Rotation 1X Rotated 180 (6.3) Pin 28 0.85 0.75 0.75 (1.5) 0.25 Typ. Pin 1 The cross-hatched area represents the merger of the center ground pad +13 individual I/O ground pads. All I/O ground pads should have at least one via connected to internal ground planes for optimum electrical performance. 6.4 (10X 0.75 Pitch) 8X 0.188 (1.5) (6.3) 0 4X 0.375 6.4 16X 0.625 4X 1.125 4X 1.875 Package Outline 2X 2.75 Package Outline (10X 0.725 Pitch) Metallization Top View Thermal via array O0.25 mm on 0.5 mm pitch. Additional vias in common ground pad will improve thermal and electrical performance. NOTE: thermal vias should be tented and filled with solder mask, 30-35 m Cu plating recommended. 8X 0.188 16X 0.625 Solder Mask Opening Top View All dimensions are in millimeters S2431 Figure 27. SKY65313-21 PCB Layout Footprint Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 14 March 15, 2016 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 202121B 4X 1.813 4X 1.088 4X 0.363 C 8X 0.5 Pin 1 Indicator 16X 2.9 B 6 8X 1.5 DATA SHEET * SKY65313-21: T/R FRONT-END MODULE Pin 28 Pin 1 Pin 1 Indicator See Detail E 28X SMT Pad 0.1 A B C 8X 1.5 8X 0.5 6 0 4X 0.375 A 4X 1.125 4X 1.875 16X 2.9 A B C 0 See Detail D 0.9 0.1 0.05 A B C 16X Solder Mask Opening 0.2 A B C 0.1 Top View Side View 0.55 0.1 0.55 0.1 0.55 0.1 3X Solder Mask Edge 0.5 0.05 Bottom View (0.1) Solder Mask Edges (0.1) (0.1) Solder Mask Edges 0.4 0.05 0.5 0.1 0.5 0.1 3X Metal Pad Edge (0.1) Metal Pad Edges (0.1) Metal Pad Edges Detail A Detail B Detail C Pad Scale: 2X 6X This Rotation 6X Rotated 180 6X Rotated 90 CW 6X Rotated 90 CCW Pad Scale: 2X 1X This Rotation 1X Rotated 180 Pad Scale: 2X 1X This Rotation 1X Rotated 180 0.2 X 0.2 0.875 4X Solder Mask Edges 5X Solder Mask Edges 0.875 0.875 0.875 15X Detail D Detail E Scale: 2X Scale: 2X All measurements are in millimeters. Dimensioning and tolerancing according to ASME Y14.5M-1994. S2125 Figure 28. SKY65313-21 Package Dimensions Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 202121B * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * March 15, 2016 15 DATA SHEET * SKY65313-21: T/R FRONT-END MODULE 1.50 0.10 0.25 0.02 (T) 4.00 0.10 2.00 0.10 1.75 0.10 6.35 0.10 (Bo) A A B 1.30 0.10 (Ko) 12.00 0.20 B 5.50 0.10 Pin 1 Indicator 1.55 0.05 8.00 0.10 Section B 6.35 0.10 (Ao) Notes: 1. 2. 3. 4. 5. Carrier tape: black conductive polycarbonate or polystyrene. Cover tape material: transparent conductive PSA. Cover tape size: 9.3 mm width. All dimensions are in millimeters. ESD-surface resistivity is 1 x 1010 Ohms/square per EIA, JEDEC TNR Specification. Section A Figure 29. SKY65313-21 Tape and Reel Dimensions Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 16 March 15, 2016 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 202121B 202120-029 DATA SHEET * SKY65313-21: T/R FRONT-END MODULE Ordering Information Model Name SKY65313-21: T/R Front-End Module Manufacturing Part Number SKY65313-21 Evaluation Board Part Number TW21-D300 Copyright (c) 2012, 2016 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 202121B * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * March 15, 2016 17