!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. C09E6.pdf 03.3.10 EMI Suppression Filters (EMIFILr) for AC Power Lines Murata EMC Solutions : http://www.murata.co.jp/emc/ EMI SUPPRESSION FILTERS (EMIFILr) Murata Manufacturing Co., Ltd. Cat.No.C09E-6 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please C09E6.pdf 03.3.10 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CONTENTS 1 EMIFILr in this catalog is the trademark of Murata Manufacturing Co., Ltd. Part Numbering 2 Outline of EMI Suppression Filter (EMIFILr) for AC Power Lines 3 1 Common Mode Choke Coil PLA10 Series Standard Winding Type 5 PLA10 Series Sectional Winding Type 6 PLA10 Series (Safety Standard Recognized) Standard Winding Type 7 PLA10 Series (Safety Standard Recognized) Sectional Winding Type 7 PLH10 Series 9 PLH10 Series (Safety Standard Recognized) 2 5 Hybrid Choke Coil 10 11 PLY10 Series Standard Winding Type 11 PLY10 Series Sectional Winding Type 11 Noise Suppression Effect of PLY10 Series 13 !Caution /Notice 14 Packaging 16 Recycled Paper 2 C09E6.pdf 03.3.10 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. o Part Numbering structure of the "Global Part Numbers" that have been adopted since June 2001 and the meaning of each code are described herein. ( The ) If you have any questions about details, please inquire at your usual Murata sales office or distributor. AC Line Filters (Global Part Number) PL A q w e r t 10 A S 152 2R0 y u 2 B yInductance qProduct ID Product ID PL R i o !0 Common Mode Choke Coils wType Code Type A AC Standard Type H AC High-frequency Type Y AC Hybrid Choke Coils Type eApplications Expressed by three figures. The unit is micro-henry (H). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R". In this case, all figures are significant digits. If inductance is less than 0.1 H, the inductance code is expressed by a combination of two figures and capital letter "N", and the unit of inductance is nano-henry (nH). The capital letter "N" indicates the unit of "nH", and also expresses a decimal point. In this case, all figures are significant digits. uRated Current Code Applications 10 for AC Line rStructure Expressed by three figures. The unit is in amperes (A). A decimal point is expressed by the capital letter "R". In this case, all figures are significant digits. iWinding Mode Code Structure Code Winding Mode A Core Vertical Type D Sectional Winding Type tFeatures Code Features S Safety Recognized N General Use R Standard Type P Aligned Winding Type oLead Dimensions Code Lead Dimensions 2 3.5mm !0Packaging 2 Code Packaging B Bulk M Magazine Package Series All series C09E6.pdf 03.3.10 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Outline of EMI Suppression Filter (EMIFILr) for AC Power Lines performance of total filter block MURATA provides two types of common mode chokes. (Standard type, High-frequency type) Hybrid choke coil is high performance EMI suppression device which can suppress both common mode noise and differential mode noise at the same time. It is effective in AC power supplies with active device for higher harmonic countermeasure, which tend to emit relatively higher differential mode noise. EMI (Electro Magnetic Interference) suppression filter for AC power lines eliminate noise entering equipment from commercial power lines or noise generated from electronic equipment. Common mode chokes, line bypass capacitors, across the line capacitors are generally used as AC EMI suppression filter device. In suppressing common mode noise, common mode chokes are most important devices. Because the characteristics of common mode chokes influences Classification of EMI Suppression Filter for AC Power Lines Product Name Effective Frequency Range (Hz) Appearance 10k Common Mode Choke Coil 100k 1M 10M 100M Application 1G Standard Type Suppression of general common mode noise PLA10 High Frequency Type Suppression of common mode noise contains high-frequency noise above 10MHz PLH10 Hybrid Choke Coil Suppression of conduction noise in AC power line with active device for higher harmonic countermeasure. Suppression of AC power line noise which contains both PLY10 common mode noise and differential mode noise. 3 C09E6.pdf 03.3.10 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Outline of EMI Suppression Filter (EMIFILr) for AC Power Lines Common Mode Choke Coil Standard Winding and Sectional Winding Standard Winding End of Winding 36 19 18 1 35 20 17 2 34 21 16 3 33 22 15 4 32 23 14 5 31 24 13 6 30 25 12 7 29 26 11 8 28 27 10 9 Beginning of Winding High-frequency noise can pass through the Filter easily because both edges of coils are close as shown above Standard Winding Large inductance is available Highly Efficient in Low Frequency Sectional Winding Excellent performance in high frequency Stray capacity between windings is low 0 Sectional Winding 15 10 7 2 14 11 6 3 13 12 5 4 32 25 24 17 31 26 23 18 30 27 22 19 29 28 21 20 Beginning of Winding High-frequency noise can hardly pass through the Filter because both edges of coil are not close as shown above Insertion Loss (dB) 16 9 8 1 End of Winding 20 (Standard Winding) 40 (Sectional Winding) 60 80 0.01 0.1 1 Frequency (MHz) 10 100 Noise Measures for Switching Power Supply Common Mode Choke Coil suppresses Common Mode Noise Noise are generated from Common Mode Noise Switching Power Supply Differential Mode Noise Line Bypass Capacitor (Y Capacitor) suppresses Common Mode Noise Differential Mode Choke Coil suppresses Differential Mode Noise Switching Power Supply PLA10/PLH10 Across the Line Capacitor (X Capacitor) suppresses Differential Mode Noise 4 Differential Mode Choke Coil suppresses Differential Mode Noise Across the Line Capacitor (X Capacitor) suppresses Differential Mode Noise Load C09E6.pdf 03.3.10 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. EMI Suppression Filters (EMIFILr) for AC Power Lines 1 Common Mode Choke Coil 16 max. 18 max. 17.5 max. The PLA10 series is a compact size AC common mode choke coil. It can obtain a high inductance value in spite of its compact size. 1. Compact and light weight 2. Low profile in vertical core layout 3. Both a standard winding type and a sectional winding type for higher frequency noise are available. 3.51 Features 130.5 Standard Winding Type o0.9 max. 100.5 (1) (4) (4) (3) [(2)] [(3)] [(1)] [(2)] (in mm) 16 max. 3.51 17.5 max. 18 max. 130.5 Sectional Winding Type o0.9 max. 100.5 (1) (4) (4) (3) [(2)] [(3)] [(1)] [(2)] (in mm) PLA10 Series Standard Winding Type Common Mode Inductance (mH) Rated Current (A) Rated Voltage (V) Insulation Resistance (M ohm) PLA10AN1522R0R2 1.5 min. 2.0 300 100 min. PLA10AN1821R7R2 1.8 min. 1.7 300 100 min. PLA10AN2221R5R2 2.2 min. 1.5 300 100 min. PLA10AN3021R3R2 3.0 min. 1.3 300 100 min. PLA10AN3521R2R2 3.5 min. 1.2 300 100 min. PLA10AN5521R0R2 5.5 min. 1.0 300 100 min. PLA10AN7420R8R2 7.4 min. 0.8 300 100 min. PLA10AN1030R7R2 10.0 min. 0.7 300 100 min. PLA10AN1230R6R2 12.0 min. 0.6 300 100 min. PLA10AN2030R5R2 20.0 min. 0.5 300 100 min. PLA10AN3030R4R2 30.0 min. 0.4 300 100 min. PLA10AN4330R3R2 43.0 min. 0.3 300 100 min. Part Number Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise) : -25C to 120C Winding Temperature Rise (at Rated Current) : 60K max. 5 C09E6.pdf 03.3.10 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. 1 PLA10 Series Sectional Winding Type Common Mode Inductance (mH) Rated Current (A) Rated Voltage (V) Insulation Resistance (M ohm) PLA10AN9012R0D2 0.9 min. 2.0 300 100 min. PLA10AN1321R7D2 1.3 min. 1.7 300 100 min. PLA10AN1821R5D2 1.8 min. 1.5 300 100 min. PLA10AN2021R3D2 2.0 min. 1.3 300 100 min. PLA10AN3621R0D2 3.6 min. 1.0 300 100 min. PLA10AN7720R7D2 7.7 min. 0.7 300 100 min. PLA10AN1330R5D2 13.0 min. 0.5 300 100 min. PLA10AN2230R4D2 22.0 min. 0.4 300 100 min. PLA10AN3630R3D2 36.0 min. 0.3 300 100 min. Part Number Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise) : -25C to 120C Winding Temperature Rise (at Rated Current) : 60K max. Equivalent Circuit Diagram (1) (2) N1 N1 : N2 = 1 : 1 N2 (4) (3) Insertion Loss Characteristics (Typical) Standard Winding Type Sectional Winding Type 0 0 PLA10AN1522R0R2 PLA10AN1821R7R2 PLA10AN2221R5R2 PLA10AN3021R3R2 PLA10AN3521R2R2 PLA10AN5521R0R2 40 PLA10AN7420R8R2 PLA10AN1030R7R2 PLA10AN1230R6R2 PLA10AN2030R5R2 PLA10AN3030R4R2 PLA10AN4330R3R2 60 80 0.01 0.1 1 Frequency (MHz) 6 PLA10AN9012R0D2 PLA10AN1321R7D2 PLA10AN1821R5D2 PLA10AN2021R3D2 20 Insertion Loss (dB) Insertion Loss (dB) 20 10 40 PLA10AN3621R0D2 PLA10AN7720R7D2 PLA10AN1330R5D2 PLA10AN2230R4D2 PLA10AN3630R3D2 60 100 80 0.01 0.1 1 Frequency (MHz) 10 100 C09E6.pdf 03.3.10 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. 16 max. 18 max. Features 1 Applications 3.51 17.5 max. 1. Compact and light weight 2. Low profile in vertical core layout 3. Both a standard winding type and a sectional winding type for higher frequency noise are available. 4. Safety standards : EN60065 130.5 Switching power supply, electric ballast (AC-AC converter) Standard Winding Type o0.9 max. 100.5 (1) (4) (4) (3) [(2)] [(3)] [(1)] [(2)] (in mm) 16 max. 3.51 17.5 max. 18 max. 130.5 Sectional Winding Type o0.9 max. 100.5 (1) (4) (4) (3) [(2)] [(3)] [(1)] [(2)] (in mm) PLA10 Series (Safety Standard Recognized) Standard Winding Type Common Mode Inductance (mH) Rated Current (A) Rated Voltage (V) Insulation Resistance (M ohm) PLA10AS1522R0R2 1.5 min. 2.0 250 100 min. PLA10AS1821R7R2 1.8 min. 1.7 250 100 min. PLA10AS2221R5R2 2.2 min. 1.5 250 100 min. PLA10AS3021R3R2 3.0 min. 1.3 250 100 min. PLA10AS3521R2R2 3.5 min. 1.2 250 100 min. PLA10AS5521R0R2 5.5 min. 1.0 250 100 min. PLA10AS7420R8R2 7.4 min. 0.8 250 100 min. PLA10AS1030R7R2 10.0 min. 0.7 250 100 min. PLA10AS1230R6R2 12.0 min. 0.6 250 100 min. PLA10AS2030R5R2 20.0 min. 0.5 250 100 min. PLA10AS3030R4R2 30.0 min. 0.4 250 100 min. PLA10AS4330R3R2 43.0 min. 0.3 250 100 min. Part Number Operating Temperature Range : -25C to 60C Winding Temperature Rise (at Rated Current) : 60K max. PLA10 Series (Safety Standard Recognized) Sectional Winding Type Common Mode Inductance (mH) Rated Current (A) Rated Voltage (V) Insulation Resistance (M ohm) PLA10AS9012R0D2 0.9 min. 2.0 250 100 min. PLA10AS1321R7D2 1.3 min. 1.7 250 100 min. PLA10AS1821R5D2 1.8 min. 1.5 250 100 min. PLA10AS2021R3D2 2.0 min. 1.3 250 100 min. PLA10AS3621R0D2 3.6 min. 1.0 250 100 min. PLA10AS7720R7D2 7.7 min. 0.7 250 100 min. PLA10AS1330R5D2 13.0 min. 0.5 250 100 min. PLA10AS2230R4D2 22.0 min. 0.4 250 100 min. PLA10AS3630R3D2 36.0 min. 0.3 250 100 min. Part Number Operating Temperature Range : -25C to 60C Winding Temperature Rise (at Rated Current) : 60K max. 7 C09E6.pdf 03.3.10 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Equivalent Circuit Diagram (1) (2) N1 N1 : N2 = 1 : 1 N2 (4) (3) Insertion Loss Characteristics (Typical) Standard Winding Type Sectional Winding Type 0 0 PLA10AS1522R0R2 PLA10AS1821R7R2 PLA10AS2221R5R2 PLA10AS3021R3R2 PLA10AS3521R2R2 PLA10AS5521R0R2 40 PLA10AS7420R8R2 PLA10AS1030R7R2 PLA10AS1230R6R2 PLA10AS2030R5R2 PLA10AS3030R4R2 PLA10AS4330R3R2 60 80 0.01 0.1 1 Frequency (MHz) 8 PLA10AS9012R0D2 PLA10AS1321R7D2 PLA10AS1821R5D2 PLA10AS2021R3D2 PLA10AS3621R0D2 PLA10AS7720R7D2 20 Insertion Loss (dB) 20 Insertion Loss (dB) 1 10 40 60 PLA10AS1330R5D2 PLA10AS2230R4D2 PLA10AS3630R3D2 100 80 0.01 0.1 1 Frequency (MHz) 10 100 C09E6.pdf 03.3.10 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. 1 PLH10 Series 16 max. 18 max. 17.5 max. The PLH10 series is a common mode choke coil for high frequency use. The same dimensions as the PLA10 series enables flexible design. Features 1. High performance in high frequency range 2. Low profile in vertical core layout 3. Compact and light weight 3.51 o0.9 max. 130.5 100.5 (1) (4) (4) (3) [(2)] [(3)] [(1)] [(2)] (in mm) Common Mode Inductance (H) Rated Current (A) Rated Voltage (V) Insulation Resistance (M ohm) PLH10AN7003R6P2 70 min. 3.6 300 100 min. PLH10AN1112R6P2 110 min. 2.6 300 100 min. PLH10AN1612R1P2 160 min. 2.1 300 100 min. PLH10AN2211R5P2 220 min. 1.5 300 100 min. PLH10AN2911R2P2 290 min. 1.2 300 100 min. PLH10AN3711R0P2 370 min. 1.0 300 100 min. Part Number Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise) : -25C to 120C Equivalent Circuit Diagram Winding Temperature Rise (at Rated Current) : 60K max. Insertion Loss Characteristics (Typical) 0 PLH10AN7003R6P2 PLH10AN1112R6P2 PLH10AN1612R1P2 (1) N1 (2) N1 : N2 = 1 : 1 (4) N2 Insertion Loss (dB) 10 20 30 PLH10AN2211R5P2 PLH10AN2911R2P2 PLH10AN3711R0P2 (3) 40 50 0.1 1.0 10 100 1000 Frequency (MHz) 9 C09E6.pdf 03.3.10 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. PLH10 Series (Safety Standard Recognized) 16 max. 18 max. Features 17.5 max. 1. High performance in high frequency range 2. Low profile in vertical core layout 3. Compact and light weight 4. Safety standards : EN60065 Applications 3.51 o0.9 max. Suppressing radiation noise in switching power supply and inverter (AC-AC converter) 130.5 100.5 (1) (4) (4) (3) [(2)] [(3)] [(1)] [(2)] (in mm) Common Mode Inductance (H) Rated Current (A) Rated Voltage (V) Insulation Resistance (M ohm) PLH10AS7003R6P2 70 min. 3.6 250 100 min. PLH10AS1112R6P2 110 min. 2.6 250 100 min. PLH10AS1612R1P2 160 min. 2.1 250 100 min. PLH10AS2211R5P2 220 min. 1.5 250 100 min. PLH10AS2911R2P2 290 min. 1.2 250 100 min. PLH10AS3711R0P2 370 min. 1.0 250 100 min. Part Number Operating Temperature Range : -25C to 60C Winding Temperature Rise (at Rated Current) : 60K max. Equivalent Circuit Diagram Insertion Loss Characteristics (Typical) 0 PLH10AS7003R6P2 PLH10AS1112R6P2 PLH10AS1612R1P2 10 (1) N1 (2) N1 : N2 = 1 : 1 (4) N2 Insertion Loss (dB) 1 20 30 PLH10AS2211R5P2 PLH10AS2911R2P2 PLH10AS3711R0P2 (3) 40 50 0.1 1.0 10 Frequency (MHz) 10 100 1000 C09E6.pdf 03.3.10 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. EMI Suppression Filters (EMIFILr) for AC Power Lines Hybrid Choke Coil The PLY10 is a compact and high performance hybrid choke coil which can handle differential mode noise caused by the harmonics currents regulation circuit as well as common mode noise. It can handle noise problems much more compactly than a combination of a conventional common mode choke coil and differential mode choke coil. 17.5 max. 3.51 130.5 Features Standard Winding Type 1. PLY10 has both functions of a common mode choke coil and a differential mode choke coil in its compact body. 2. Low profile in vertical core layout 3. PLY10 has the same pin layout as a general type common mode choke coil which enables it to replace conventional components. o0.9 max. 100.5 (1) (4) (4) (3) [(2)] [(3)] [(1)] [(2)] (in mm) 16 max. 17.5 max. 18 max. 3.51 EMI Problem for harmonics currents regulation There are some methods meet harmonics currents regulations (IEC1000-3, EN60555-2) such as active filter type and one converter type. However, they cause new EMI problems of differential mode noise because they use active components. For that reason, additional filter components to meet differential mode noise must be applied. 2 16 max. 18 max. 130.5 Sectional Winding Type o0.9 max. 100.5 (1) (4) (4) (3) [(2)] [(3)] [(1)] [(2)] (in mm) PLY10 Series Standard Winding Type Part Number Common Mode Inductance (mH) Normal Mode Inductance (mH) Rated Current (A) Rated Voltage (Vac) PLY10AN1430R5R2 14.0 min. 1.0 min. 0.5 300 PLY10AN9920R6R2 9.9 min. 0.69 min. 0.6 300 PLY10AN8720R7R2 8.7 min. 0.53 min. 0.7 300 PLY10AN6220R8R2 6.2 min. 0.40 min. 0.8 300 PLY10AN4321R0R2 4.3 min. 0.30 min. 1.0 300 PLY10AN2821R2R2 2.8 min. 0.19 min. 1.2 300 PLY10AN2121R4R2 2.1 min. 0.15 min. 1.4 300 PLY10AN1521R6R2 1.5 min. 0.11 min. 1.6 300 PLY10AN1121R8R2 1.1 min. 0.09 min. 1.8 300 PLY10AN9012R0R2 0.9 min. 0.065 min. 2.0 300 Operating Temperature (Ambient Temperature Range + Winding Temperature Rise) : -25C to 120C Winding Temperature Rise (at Rated Current) : 60K max. PLY10 Series Sectional Winding Type Common Mode Inductance (mH) Normal Mode Inductance (mH) Rated Current (A) Rated Voltage (Vac) PLY10AN1130R5D2 11.0 min. 0.84 min. 0.5 300 PLY10AN9720R6D2 9.7 min. 0.67 min. 0.6 300 PLY10AN8720R7D2 8.7 min. 0.50 min. 0.7 300 PLY10AN4420R8D2 4.4 min. 0.32 min. 0.8 300 PLY10AN3521R0D2 3.5 min. 0.24 min. 1.0 300 Part Number Continued on the following page. 11 C09E6.pdf 03.3.10 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Common Mode Inductance (mH) Normal Mode Inductance (mH) Rated Current (A) Rated Voltage (Vac) PLY10AN2321R2D2 2.3 min. 0.16 min. 1.2 300 PLY10AN1421R4D2 1.4 min. 0.11 min. 1.4 300 PLY10AN1121R7D2 1.1 min. 0.065 min. 1.7 300 PLY10AN7012R0D2 0.7 min. 0.050 min. 2.0 300 Part Number Operating Temperature (Ambient Temperature Range + Winding Temperature Rise) : -25C to 120C Winding Temperature Rise (at Rated Current) : 60K max. 2 Equivalent Circuit Diagram Differential Mode Inductor (1) (2) (4) (3) Common Mode Inductor Common Mode Insertion Loss Characteristics (Typical) Standard Winding Type Sectional Winding Type 0 0 PLY10AN9012R0R2 PLY10AN1121R8R2 PLY10AN1521R6R2 PLY10AN2121R4R2 20 Insertion Loss (dB) Insertion Loss (dB) 20 40 PLY10AN2821R2R2 PLY10AN4321R0R2 PLY10AN6220R8R2 PLY10AN8720R7R2 PLY10AN9920R6R2 PLY10AN1430R5R2 60 80 0.01 0.1 1 PLY10AN7012R0D2 PLY10AN1121R7D2 PLY10AN1421R4D2 PLY10AN2321R2D2 PLY10AN3521R0D2 10 40 60 PLY10AN4420R8D2 PLY10AN8720R7D2 PLY10AN9720R6D2 PLY10AN1130R5D2 80 0.01 100 0.1 Frequency (MHz) 1 10 100 Frequency (MHz) Differential Mode Insertion Loss Characteristics (Typical) Standard Winding Type Sectional Winding Type 0 0 PLY10AN9012R0R2 PLY10AN1121R8R2 PLY10AN1521R6R2 PLY10AN7012R0D2 PLY10AN1121R7D2 PLY10AN1421R4D2 20 Insertion Loss (dB) Insertion Loss (dB) 20 40 60 80 0.01 PLY10AN2121R4R2 PLY10AN2821R2R2 PLY10AN4321R0R2 PLY10AN6220R8R2 PLY10AN8720R7R2 PLY10AN9920R6R2 PLY10AN1430R5R2 0.1 60 1 Frequency (MHz) 12 40 10 100 80 0.01 PLY10AN2321R2D2 PLY10AN3521R0D2 PLY10AN4420R8D2 PLY10AN8720R7D2 PLY10AN9720R6D2 PLY10AN1130R5D2 0.1 1 Frequency (MHz) 10 100 C09E6.pdf 03.3.10 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Noise Suppression Effect of PLY10 Series The data shows noise suppression effects comparison PLY10 with existing common mode choke coil. (In AC adaptor of note PC) 2 Common mode choke coil and differentical mode choke coil are used. 0.33F 0.1F 24mH 680H Hybrid choke coil PLY10 0.33F 1000pF 0.1F 1000pF PLY10A1130R5D * Noise Level The filter circuit with hybrid choke coil has suppressed conducted noise as well as conventional filter in spite of its compact composition. Hybrid choke coil PLY10 90 90 80 80 70 70 Noise Level (dBV) Noise Level (dBV) Common mode choke coil and differencial mode choke coil are used. 60 50 60 50 40 40 30 30 20 0.5 1 5 10 Frequency (MHz) 30 20 0.5 1 5 10 Frequency (MHz) 30 13 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please C09E6.pdf 03.3.10 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. !Caution /Notice !Caution (Rating) 2 1. Rated Current Operating current should not exceed the rated value. Even if operating current is under the rated value, adequate ventilation is required to avoid excessive heat generated within the product (choke coil) and from surrounding heat sources. If exceeding these conditions, excessive heat may cause fumes or permanent damage to the product. Please ensure that product (choke coil) is evaluated and confirmed against the specification when it is mounted in your final assembled product. -> Winding temperature should be less than 120 degree C. Maximum allowable temperature at the surface of coil (ambient temperature + winding temperature rise) is in accordance with each safety standard applicable to final assembeld product. When the temperature at winding exceeds maximum allowable temperature of safety standard, the rated current should be derated. 2. Inrush Current Inrush current should not exceed 10 times rated current within 1/4 cycle of 50/60Hz commercial power line. Inrush current should be limited to a minimum of 10 seconds after last inrush. If these conditions are exceeded, excessive heat may cause fumes or permanent damage to the component, or at worst cause ignition. Notice (Storage and Operating Condition) 1. Soldering Conditions (1) Flux, solder Rosin-based flux should be used. Do not use strong acidic flux with halide content exceeding 0.2%wt (chlorine conversion value) Use 63/37 solder (Sn 63%/Pb 37%) or 60/40 solder (Sn 60%/Pb 40%) (2) Flow soldering Products should be soldered by flow method under the following conditions: Soldering Temp. : 240 to 260 degree C Soldering Time : Less than 5 s 2. Cleaning Avoid cleaning product due to non-waterproof construction. 3. Storage and handling requirements Notice (Soldering and Mounting) Magnetic Flux Leakage Choke coils generate small amounts of magnetic flux leakage that may adversely affect equipment operation according to component arrangement. Testing should be completed on final assembly to ensure equipment performance is not affected. 14 (1) Storage period Product should be used within 12 months after receiving. Solderability should be checked if this period is exceeded. (2) Storage conditions Storage temperature : -10 to 40 degree C Relative humidity : 30 to 70% Avoid sudden changes in temperature and humidity. Don't keep products in corrosive gases such as sulfur, chlorine gas or acid, or it may cause oxidation of lead terminals resulting in poor solderability or corrosion of component windings. (3) Handling conditions Care should be taken when transporting or handling product to avoid excessive vibration or mechanical shock. catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please C09E6.pdf 03.3.10 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. !Caution /Notice Notice (Rating) Coil Humming Noise Magnetic flux generated between coil and core or between the choke coil windings creates repulsive power between the coil windings. This repulsive power causes the coil winding to vibrate and create a humming noise. The amount of hum produced by the coil is proportionate to the amount of harmonic distortion generated by the operating current. This does not influence the electrical performance of the coils, but it should be considered and tested in actual circuit application. 2 15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please C09E6.pdf 03.3.10 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Packaging Minimum Quantity Part Number 2 Minimum Quantity (pcs.) Magazine Package Box PLA10 30 210 PLH10 30 210 PLY10 30 200 16 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. C09E6.pdf 03.3.10 Note: 1. Export Control For customers outside Japan Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons. For customers in Japan For products which are controlled items subject to the "Foreign Exchange and Foreign Trade Law" of Japan, the export license specified by the law is required for export. < < > > 2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage to a third party's life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. q Aircraft equipment w Aerospace equipment e Undersea equipment r Power plant equipment t Medical equipment y Transportation equipment (vehicles, trains, ships, etc.) u Traffic signal equipment i Disaster prevention / crime prevention equipment o Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed in the above 3. Product specifications in this catalog are as of January 2003. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process. http://www.murata.com/ Head Office 2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111 International Division 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp