IDS-15 Amphenol (R) VORTEX GT Power Connectors for Wind Energy Technologies Amphenol(R), which has been manufacturing connectors for more than 75 years, offers an extensive array of connector lines including rectangular, circular, fiber optic, EMI/EMP filter and a variety of special application connectors. With the introduction of its patented RADSOK (R) technology, Amphenol (R) Industrial Operations (AIO) revolutionized the connector Industry. RADSOK'S twisted grid configuration allows for 50% more current to pass through the same size pin, while providing increased reliability, ampacity and cycle durability as well as lower insertion force, T-rise and voltage drop. Features: * 1/4 Turn Mating * Crimp or Busbar Termination * Silver Plated Contacts * Finger Proof * Current: 800Amp * Voltage: DC 470/600V * Operation Temperature: -20~120F * Panel Mount Receptacle * Life cycles: >= 2000 www.amphenol-industrial.com The Vortex GT is a reverse bayonet connector which incorporates our patented RADSOK technology. It is designed to deliver high power from source to load. The plug contains an 18mm RADSOK socket and Receptacle contains an 18mm pin with the option of crimp, 2 hole busbar, or threaded busbar termination. When unmated personal safety is maintained through IP2X (touchproof) contact design. The RADSOK'S strongest benefit is its very low milli-volt drop and minimized temperature rise when transmitting high current. The 18mm Vortex GT is perfectly suited for high amperage applications such as electrical generators, fuel cells, load banks, and charging systems. Benefits: * Quick positive coupling * Audible, tactile and visual indication of full coupling * Environmental Applications * High Amperage Applications * Easily Adaptable * Better Conductivity where needed VORTEX CODE LOGIC V 1 2 3 4 5 N W X Y VORTEX GT 06 03C 03B 03T Plug with Crimp Contact Receptacle with Crimp Contact Receptacle with 2 Hole Busbar Receptacle with Threaded Busbar E Protective Cap Omit No Protective Cap M40 Metric M40 Cable Adapter M50 Metric M50 Cable Adapter Omit For Receptacle without Adapter CONNECTOR STYLES: 1 2 3 *4 5 Omit 180 Normal Rotation 120 Alternate Rotation 90 Alternate Rotation 210 Alternate Rotation 120 mm sq crimp wire well 150 mm sq crimp wire well 185 mm sq crimp wire well 200 mm sq crimp wire well obtained using supplied crimp sleeve 240 mm sq crimp wire well For Threaded or 2 Hole Busbar Option RECEPTACLE PLUG Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors. For further information on your individual application requirements, contact: Amphenol Corporation North America: Amphenol Industrial Operations 180 N. Freeport Drive, Plant 4 Nogales, AZ 85621 Tel: (520) 285-5130 Fax: (520) 285-5134 Europe: Amphenol Industrial Operations Europe Via Barbaiana 5 1-20020 Lainate (MI) Italy Tel: +39 02 93254.204 Fax: +39 02 93254.444 Middle East: Amphenol Middle East Enterprises FZE Office C-37 PO Box 21107 Ajman Free Zone, UAE Tel: +9716-7422494 Fax: +9716-7422941 Email: rpedrazzini@amphenol-aio.com Email: info@amphenol-aio.com Email: ameefze@eim.ae Asia: Amphenol Technology Shenzhen Ltd Block 5 Fuan 2nd Industrial Park Dayang Rd, Fuyong Baoan Baoan, Shenzhen, China 518103 Tel; +86 755 2881 8389 Fax; +86 755 2991 8310 Email: yb.zhu@amphenol-industrial.com