CPE series Signal Connector, Compact & Watertight Connecteur de signal, compact & etanche CPE Description Plug Fiche Nut Ecrou d'embase Seal Joint Receptacle Embase The CPE series is built around 3 shell sizes (4, 7 and 12 contacts) each one consisting of a plug and a receptacle. The particularity of the CPE series is that it offers a wide range of standard accessories to be used on both plug or receptacle. Easy to use, and quick to implement, this small connector is recommended for all types of control/command applications. La gamme CPE s'articule autour de 3 tailles de boitiers distincts (4, 7 et 12 contacts) comprenant chacune une fiche et une embase. La gamme se caracterise par un choix d'accessoires d'adaptation et de contacts pouvant se monter indifferement sur la fiche ou l'embase. De mise en oeuvre rapide, leger et de faible encombrement, ce connecteur est une interface efficace pour toutes applications de commande ne necessitant pas de caracteristiques mecaniques severes. Table of Contents Sommaire Presentation Presentation Technical characteristics...............................3 Arrangements..............................................3 Dimensions...................................................4 Part numbers................................................4 Contacts........................................................5 Crimping procedure.....................................5 Cable entry equipment................................6 Applications..................................................7 Caracteristiques techniques........................ 3 Arrangements............................................. 3 Encombrements.......................................... 4 References................................................... 4 Contacts....................................................... 5 Sertissage..................................................... 5 Equipement entree de cable...................... 6 Applications................................................. 7 2 Technical Characteristics Caracteristiques techniques CPE Electrical Electriques Nominal Current : 13 A Intensite nominale : 13 A Rated Operating Voltage : 380 V ~ classe 2 selon norme NF C 20-040 / VDE 0110-1 / EN 50124-1 Tension d'utilisation : 380 V ~ classe 2 selon norme NF C 20040 / VDE 0110-1 / EN 50124-1 Test Voltage : 2300 V eff. Tension de tenue : 2300 V eff. Contact Resistance : < 2 m Resistance de contact : < 2 m Insulation Resistance : > 5000 M Resistance d'isolement : > 5000 M Mechanical Mecaniques Plug & Receptacle : Black Polyamide halogene free Fiche & Embase : Polyamide noir sans halogene Flammability : I2F1 according to NF F 61-101 & 102 - UL94V0 Classement au feu : I2F1 suivant NF F 16-101 & 102 - UL94V0 Contact : Brass - Stainless steel spring (supplied in chain form) Contact : Laiton - ressort acier inoxydable (contact standard : decoupe / roule etame) Seal : Neoprene Seal : Neoprene Cable-gland (optional) : polyamide or polycarbonate Presse-etoupe (option) : polyamide ou polycarbonate Durability : 400 mating cycles Endurance : 400 manoeuvres Climatical Climatiques Operating Temperature Range : -40C +100C Operating Temperature Range : -40C +100C Protection Index with cable-gland : IP66 Protection Index with cable-gland : IP66 Mechanical resistance index : IK07 Mechanical resistance index : IK07 Arrangements Size / Taille 1 Size / Taille 2 Size / Taille 3 1 9 6 4 1 2 5 1 3 2 4 12 11 3 8 10 7 7 2 3 4 6 5 Front Plug / Avant fiche 3 Dimensions & Part Numbers Dimensions & References CPE Dimensions Plug + cable gland* Fiche + presse-etoupe* Receptacle + cable gland* Embase + presse-etoupe* B D maxi OC E accross corner/ sur angles OZ I accross flat / sur plats F G A H maxi * sold separately / vendu separement Panel cut out Percage cloison J Plug + Receptacle Fiche + Embase X K Size Taille Nbre contacts Y Backshell Raccord PG A B C D E F G H I J K 42 (1.65) 24 (0.94) 8 (0.31) 30 (1.18) 29,5 (1.16) 15,5 (0.61) 38 (1.50) 27 (1.06) ~ 74 (2.91) 51 (2.00) Y Z (+0,3/+0,1) (+0,3/+0,1) PG 22,5 (0.88) 9,5 (0.37) 16 X 1 4 9 ~ 65 (2.56) 2 7 13 ~ 72 (2.83) 43 (1.69) 29 (1.14) 8 (0.31) 36 (1.42) 30 (1.18) 16 (0.63) 45 (1.77) 32 (1.26) ~ 81 (3.19) 52 (2.04) 28,5 (1.12) 12 (0.47) 21 3 12 21 ~ 78 (3.07) 46 (1.81) 38 (1.50) 8 (0.31) 51 (2.00) 31,5 (1.24) 16,5 (0.65) 48,5 (1.91) 46 (1.81) ~ 87 (3.42) 55 (2.16) 37 (1.46) 16,5 (0.65) 29 mm / (inch) mm / (inch) The dimension for A, J and H are only given for information Les encombrements A, J et H sont donnes a titre indicatif PG according to NF C 68-311 PG selon norme NF C 68-311 Part Numbers & Weight / References & Masses Size / Taille 1 4 contacts Weight Poids Size / Taille 2 7 contacts Weight Poids Size / Taille 3 12 contacts Weight Poids Plug Fiche CPE1631F0000 10,2 g CPE1632F0000 14,8 g CPE1633F0000 24,5 g Receptacle Embase CPE1631E0000 13,9 g CPE1632E0000 20,2 g CPE1633E0000 37,1 g Supplied without contact and without accessory / Livre sans contact et sans accessoire Seal and nut are supplied with receptacle / Les embases sont livrees avec le joint et l'ecrou 4 CPE Contacts Contacts Cross-section Section Part Numbers References P 0,65 - 1,64 mm2 DPE0405-0053AS S 0,65 - 1,64 mm2 DPE0405-0054AS Contacts Stamped & formed P : Pin / Broche - S : Socket / Douille Nota : Other section, contact us / Autres sections, nous contacter Possibility of machined contacts / Possibilite de contacts decolletes Crimping Procedure Sertissage - Strip the cable of a length of 0.236 inches (6 mm) - Denuder le cable d'une longueur de 6 mm - Insert pin or socket contact into crimping tool and place the cable positioner into the contact bucket as shown on schema 1 - The contact bucket will then be correctly placed - Positionner le contact male ou femelle dans la pince a sertir de telle sorte que la lame de positionnement soit dans la fente du contact (schema 1). Les pattes sertissables sont alors en face des machoires de la pince. - Insert stripped wire into contact as shown on schema 2 - Introduire le cable denude dans le contact (schema 2) Crimp the contact until the tool dies are closed and the ratchet releases. Check terminal to ensure that all strands are contained - Sertir en fermant la pince jusqu'au relachement de la cremaillere - Schema 1 Contact positioner Fente de positionnement Contact Cable positioner Lame de positionnement Schema 2 5 Tools Outillages Part Numbers References Crimping tool for all contacts Pince a sertir pour tous contacts Ref. : AMP 584 95-1 OUT0405-0064AS Extraction tool Outil d'extraction OUT0405-0063AS Cable Entry Equipment Equipements entree de cable CPE Cable gland / Presse-etoupe IP66 Material / Matiere : Polyamide E D A P P C Size Taille A E C P OD Part Number Reference 1 PG9 8 (0.314) 19 (0.748) 19 (0.748) 2-6 (0.078 to 0.236) STD0401-0452AS 1 PG9 8 (0.314) 19 (0.748) 19 (0.748) 4-8 (0.157 to 0.314) STD0401-0451AS 2 PG13,5 9 (0.354) 24 (0.944) 24 (0.944) 4-9 (0.157 to 0.354) STD0401-0453AS 2 PG13,5 9 (0.354) 24 (0.944) 24 (0.944) 7 - 12 (0.275 to 0.472) STD0401-0173AS 3 PG21 11 (0.433) 33 (1.299) 33 (1.299) 9 - 16 (0.354 to 0.629) STD0401-0454AS 3 PG21 11 (0.433) 33 (1.299) 33 (1.299) 13 - 18 (0.511 to 0.708) STD0401-0174AS mm / (inch) The glands threads conform to standard NF C 68-311 or DIN 40430. Les PG repondent a la norme des filetages suivant NF C 68-311 ou DIN 40430. 6 Applications Engine / Moteur Robotic / Robotique Remote surveillance camera / Camera de surveillance Remote control gates / Commande de portail and others ... / et autres ... ZAC Le Monne - Rue du Champ du Verger - CS 30009 - 7 2 705 ALLONNES C E D E X - F R A N C E Tel : +33 (0)2 43 61 45 45 - Fax : +33 (0)2 43 61 45 00 - E - m a i l : r a i l w a y @ d e u t s c h . n e t - w w w . d e u t s c h . n e t DEUTSCH reserves the right to alter the specifications of the products described in this document without prior notice. Overall dimensions and specifications are given for guidance only. For further details, please contact us. February 2011 C ARRIER KHEOPS BAC Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: CPE1631E0000 CPE1632F0000 CPE1631F0000 CPE1633F0000 CPE1633E0000 CPE1632E0000 DPE04050053AS DPE0405-0054AS