RF Coax Connectors BNC Connectors (50 ohm/75 ohm) Product Facts Bayonet lock coupling for quick connect/disconnect Various connectors available in 50 and 75 ohm versions Fully intermateable with comparable BNC UG/U connectors Full range of Hex Crimp and O Crimp Products for common coaxial cables. Low VSWR Single crimp connectors offer one crimping operation for fast application Twist-on connectors require no special tooling for application to the cable Field serviceable (Category A) connectors qualified to MIL-C-39012 Field replaceable (Category C) plugs with captivated center contact Field replaceable plugs can be terminated with industry standard tooling Tarnish resistant Nickel finish available Choice of different dielectrics Listed under the Component Program of Underwriters Laboratories Inc., File No. E81956 R PC Board soldered connectors are recognized under the Component Program of Underwriters Laboratories Inc., File No. E81956 The Tyco Electronics BNC RF connector family with bayonet locking coupling provides highly reliable, quick connect/disconnect coaxial connections. Exclusive single and O crimp terminations allow positive insulation grip and require no soldering, providing terminations at a very low overall applied cost. Available in both 50 and 75 ohm versions, these con- nectors feature numerous styles including cable plugs and jacks, adapters and printed circuit board connectors. In addition to a variety of crimp type terminations, connectors are furnished in field replaceable and twist-on styles. These connectors accept a wide range of coaxial cables and are intermateable with industry standard connectors designed to MIL-C39012 specifications. Tyco Electronics can also supply low cost alternatives with an extensive commercial type product line. A lower cost consumer series product offers the capability to supply center contacts in strip form and allow for automated center contact crimp technology. All connectors are designed around the mil-specifications, but utilize low-cost materials, offering comparable mechanical and electrical performance. 108-12002 -- BNC Commercial T Adapter 108-12095 -- BNC Commercial 75 Ohm Connectors 108-12096 -- BNC Commercial FeedThru and Bulkhead Adapters 108-12079 -- BNC Commercial 50 Ohm Solder Jacks 108-12103 -- BNC Commercial PCB Press Fit Jacks Application Specifications -- 114-12001 -- BNC Commercial PCB Jack Press Fit Performance Specifications -- Page 45 Material Specifications -- Page 46 Tooling -- Pages 266-268 Military Category -- All MIL type O crimp connectors are Category B Type (Tyco Electronics Crimp Tooling), unless otherwise noted. Packaging -- All MIL Type connectors are packaged individually, all O crimp connectors are bulk packaged and all Hex crimp connectors are individually packaged unless otherwise noted. R Certified by Canadian Standards Association File No. LR 7189 R Between Series Adapters For BNC Between Series Adapters, see pages 251-260. Related Product Data Product Specifications -- 108-1275 -- BNC Ohm Terminators 108-12020 -- BNC O Crimp Connectors 108-12044 -- BNC Commercial Hex Crimp 108-12047 -- BNC Commercial and Hex Crimp Connectors 108-12074 -- BNC Solder Jacks 108-12075 -- BNC Connectors (Category A) 108-12078 -- BNC Commercial PCB Panel-Mount Jacks 44 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors (50 ohm/75 ohm) Performance Specifications Characteristics Electrical Impedance, Nom. (Ohms) Working Voltage (Volts RMS) Contact Resistance (Milliohms) Initial Insulation Resistance (Megohms) Dielectric Withstanding Voltage (VAC) Corona Level at 70,000 ft. (Volts, RMS) RF Leakage, Max. (dB) RF Insertion Loss, Max. (dB) Frequency Range (GHz) VSWR in Frequency Range Max. Mechanical Force to Engage (lbs. [N])/couple, (in-lbs. [N-M]) max. Coupling Nut Retention, Min. N [lbs.] Cable Retention, N [lbs.] Durability (Cycles) Jam Nut Mounting Torque, Max. [N*m] (in. lbs.) Environmental Temperature Range, Operating (C) Vibration Physical Shock Single Crimp (MIL Type) Category B O Crimp (MIL Type) Straight Solder Clamp Right-Angle Solder Clamp Commercial O Crimp & Hex Crimp 50 Ohms Commercial O Crimp & Hex Crimp 75 Ohms Commercial PC Board 50 & 75 Ohms Commercial Solder 50 Ohm Jacks 50 50 50 50 50 75 50 & 75 50 & 75 500 500 500 500 500 500 500 500 Inner: 1.5 Outer: 0.3 Inner: 1.5 Outer: 0.2 Inner: 1.5 Outer: .20 Inner: 1.5 Outer: .20 Inner: 2.0 Outer: 1.0 Inner: 2.0 Outer: 2.0 Inner: 6/1.5 Outer: 3/0.2 Inner: 2.75 Outer: 1.0 5000 5000 5000 5000 5000 5000 5000 5000 1500 1500 1500 1500 1500 1500 1500 1500 375 375 375 375 375 375 -- 375 -- -55 at 2-3 GHz 0.2 at 3 GHz -55 at 2-3 GHz 0.3 at 3 GHz -55 at 2-3 GHz 0.2 at 3 GHz -55 at 1-2 GHz 0.15 at 2 GHz -- -- -- -55 at 2-3 GHz 0.2 at 3 GHz -- -- 0-2.5 0-4 0-4 0-4 0-4 0-2 0-4 and 0-2 0-4 1.35 1.30 1.30 1.35 1.30 1.30 -- -- 13.3/11.12 [3/2.5] 444.8 [100] 266.9 [60] (RG58C/U) 500 25 [2.8] 13.3/11.12 [3/2.5] 444.8 [100] 266.9 [60] (RG58C/U) 500 25 [2.8] 13.3/.028 [3/2.5] 444.8 [100] 177.9 [40] (RG58C/U) 500 25 [2.8] 13.3/.028 [3/2.5] 444.8 [100] 177.9 [40] (RG58C/U) 500 26.7/26.69 [6/6.0] 266.9 [60] 266.9 [60] (RG58C/U) 500 25 [2.8] 26.7/26.69 [6/6.0] 266.9 [60] 266.9 [60] (RG58C/U) 500 25 [2.8] -- -- -- -- 266.9 [60] (PCB Ret) 500 253/124 [2.8/1.4] 500 25 [2.8] -55 to +85 -65 to +165 MIL-STD-202 Method 201A -65 to +1651 -55 to +852 MIL-STD-202 MIL-STD-202 Method 204 Method 204 Cond. B Cond. B MIL-STD-202 MIL-STD-202 Method 213 Method 213 Cond. G, 50 G's Cond. G, 50 G's -65 to +85 -- -65 to +165 -65 to +165 -55 to +85 -55 to +85 MIL-STD-202 Method 204 Cond. B MIL-STD-202 Method 213 Cond. G MIL-STD-202 Method 204 Cond. B MIL-STD-202 Method 213 Cond. G MIL-STD-1344 Method 2005 Cond. III MIL-STD-1344 Method 2004 Cond. G, 100 G's MIL-STD-1344 Method 1003 Cond. A MIL-STD-1344 Method 1002 Type II MIL-STD-1344 Method 1001 Cond. B 108-12044 108-12047 MIL-STD-202 Method 204 Cond. B MIL-STD-202 Method 213 Cond. I, 100 G's MIL-STD-202 Method 213 Cond. I or A, 50 G's MIL-STD-202 Method 204 Cond. B MIL-STD-202 Method 213 Cond. I, 100 G's MIL-STD-202 Method 107 MIL-STD-202 Method 107 MIL-STD-202 Method 107 MIL-STD-202 Method 106 MIL-STD-202 Method 106 MIL-STD-202 Method 106 MIL-STD-202 Method 101 Cond. B MIL-STD-202 Method 101 Cond. B MIL-STD-202 Method 101 Cond. B 108-12095 108-12078 108-12079 Thermal Shock MIL-STD-202 Method 107 MIL-STD-202 Method 107 MIL-STD-202 Method 107 MIL-STD-202 Method 107 Moisture Resistance MIL-STD-202 Method 106 MIL-STD-202 Method 106 MIL-STD-202 Method 106 MIL-STD-202 Method 106 Salt Spray MIL-STD-202 Method 101 Cond. B MIL-STD-202 Method 101 Cond. B MIL-STD-202 Method 101 Cond. B MIL-STD-202 Method 101 Cond. B 108-12002 108-12020 -- -- Product Specification -- 1Assembled to cable with polytetrafluorethylene dielectric. to cable with polyethylene dielectric. 3For Metal Threads 4For Polyester Threads 2Assembled 45 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors (50 ohm/75 ohm) Performance Specifications (Continued) Connector Component Single Crimp (MIL Type) Category B&C O Crimp (MIL Type) Straight Solder Clamp Right-Angle Solder Clamp Commercial O Crimp Hex Crimp & Terminators Commercial PCB Solder Commercial PCB Press Fit Commercial Solder Ohm Jacks Brass QQ-B-626 Brass QQ-B-626 Beryl. Copper QQ-C-530 Brass QQ-B-626 Brass Brass Brass QQ-B-626 Zinc QQ-Z-363 -- -- -- Phos. Bronze QQ-B-750 Brass Brass Brass MIL-C-21768 -- -- -- Zinc QQ-Z-363 Zinc Zinc QQ-Z-363 Adapters Connector Material Collar Outer Contact (Plug) Shell (Jack) Brass QQ-B-626 Brass QQ-B-626 Brass -- Zinc QQ-Z-363 Dielectric TEFLON MIL-P-19468 Polypropylene Gen. Purpose TEFLON MIL-P-19468 TEFLON TEFLON Polyethylene Polypropylene Polymethylpentene Gen. Purpose Center Contact (Plug) Brass QQ-B-626 Brass QQ-B-626 Brass Brass Brass QQ-B-626 -- -- -- Center Contact (Jack) Beryl. Copper ASTM-B-643 QQ-C-530 Beryl. Copper ASTM-B-643 QQ-C-530 Beryl. Copper Beryl. Copper Beryl. Copper QQ-C-530 Phos. Bronze QQ-B-750 Beryl. Copper QQ-C-530 Phos. Bronze QQ-B-570 Beryl. Copper QQ-C-530 Silicon Rubber QQ-R-765 Copper Ferrule QQ-C-576 Connector Primary Finishes2 Silicon Rubber QQ-R-765 Copper QQ-C-576 Silicon Rubber Silicon Rubber -- -- -- -- -- Silicon Rubber QQ-R-765 Copper QQ-C-576 TEFLON MIL-P-19468 Polypropylene, Gen. Purpose Brass QQ-B-626 Beryl. Copper QQ-C-530 Phos. Bronze QQ-B-570 Beryl. Copper QQ-C-530 Silicon Rubber QQ-R-765 -- -- -- -- Silver/ Bright Nickel Silver/ Bright Nickel Bright Nickel QQ-N-290 -- -- -- -- Tin Lead ASTM-B-545 -- -- -- Gasket Collar Silver QQ-S-365 Bright Nickel QQ-N-290 Silver QQ-S-365 Bright Nickel QQ-N-290 Silver QQ-S-365 Bright Nickel QQ-N-290 Outer Contacts (Plug & Jack) QQ-S-365 Gold Center Contacts (Plug & Jack) MIL-G-45204 Silver Gold MIL-G-45204 Gold Ferrule3 QQ-S-365 Silver QQ-S-365 Tin Lead ASTM-B-545 -- Silver/ Bright Nickel Polymethylpentene TEFLON MIL-P-19468 Gen. Purpose1 QQ-Z-363 Brass QQ-B-626 TEFLON MIL-P-19468 Polyester PBT MIL-P-24519 Brass QQ-B-626 Brass QQ-B-626 Beryl. Copper QQ-C-530 Brass QQ-B-626 Silver QQ-S-365 Bright Nickel QQ-N-290 Silver Bright or Silver/ Bright Nickel Bright Nickel Bright Nickel QQ-S-365 Matte Nickel Bright Nickel QQ-N-290 QQ-N-290 QQ-N-290 Bright Nickel QQ-N-290 QQ-N-290 Tin Lead Tin Lead Tin Lead Silver ASTM-B-545 ASTM-B-545 Gold ASTM-B-545 QQ-S-365 Gold Silver, QQ-S-365 Silver, QQ-S-365 MIL-B-45204 Silver, QQ-S-365 Gold Gold, MIL-G-45204 Gold, MIL-G-45204 Gold, MIL-G-45204 MIL-G-45204 -- 1Several pc board connectors have an outer polyester PBT insulator per MIL-P-24519. more than one finish is listed, refer to individual catalog page(s) or customer drawings for exact specification. 3Ferrules with tin-lead finish are used with nickel plated outer contacts. 2If TEFLON is a trademark of E.I. Dupont de Nemours and Company. 46 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm Plugs, Crimp Single Crimp Hex and O Crimp L Max. 14.53 [.572] Dia. Max. 14.53 [.572] Dia. Max. L Max. CERTI-CRIMP Hand Tool with Integral Die Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 -- 69471- RG/U Cable Termination Type Body Plating Dielectric Style Dim. L 178, 178A, 178B, 196, 196A Single Crimp Silver TEFLON MIL Type 33.33 1.312 69245-4 Hex Crimp Nickel Polyethylene Commercial -- 58436-3 -- 2-5221128-1 O Crimp Nickel Polyethylene Commercial 220009-5 318450-2 220217-3 1-5227079-6 O Crimp Nickel TEFLON MIL Type -- 1424050-1 220026-1 5225395-7 Single Crimp Silver TEFLON MIL Type 69245-2 -- 69422- 2-5330061-1 Hex Crimp Nickel Polyethylene Commercial -- 2-5221128-3 O Crimp Nickel Polyethylene Commercial O Crimp Nickel TEFLON MIL Type 174, 188, 188A, 316 179, 179A, 179B, 161, 187, 187A, BELDEN 9221 RD 316, 188, Double Braid BELDEN 8219 BELDEN 9907, 89907 COMM/ SCOPE 2104 BELDEN 8218 Part No. 5330876-0 Hex Crimp Nickel Polyethylene Commercial O Crimp Nickel Polyethylene Commercial 33.53 1.320 27.69 1.090 30.18 1.188 33.33 1.312 33.53 1.320 27.69 1.090 -30.18 1.188 33.33 1.312 27.69 1.090 33.53 1.320 27.69 1.090 O Crimp Nickel Polyethylene Commercial 27.69 1.090 220187-1 318452-2 220217-1 6-5227079-84 O Crimp Nickel Polyethylene Commercial 69477-4 58539-1 58376-1 1-5227079-9 O Crimp Nickel TEFLON MIL Type 27.69 1.090 30.18 1.188 -- 91904-1 69669-2 1-5225395-0 Single Crimp Silver TEFLON MIL Type O Crimp Nickel Polyethylene Commercial -- 58436-3 -- 1424050-1 220217-3 2-5227079-2 -- -- 220026-1 5225395-8 -- 91910-1 69408- 2-5329446-1 69477-4 58539-1 -- 8-5227079-2 -- 58436-12 -- 2-5221128-7 220187-1 58435-11 220217-1 6-5227079-73 1Order Tyco Electronics PRO-CRIMPER Coaxial "O" Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. use with BELDEN 9907 cable, COMM/SCOPE 3104 cable, and BELDEN 8219 cable only. 4For use with BELDEN 89907 cable, and COMM/SCOPE 2104 cable only. 2Order 3For BELDEN is a trademark of Belden Wire and Cable Company. COMM/SCOPE is a trademark of Commscope, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 47 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Plugs, Crimp (Continued) Single Crimp Hex and O Crimp L Max. 14.53 [.572] Dia. Max. RG/U Cable 58, 58A, 58B, 58C BELDEN 88240, BERK-TEK BTDC-58, COMM/ SCOPE 2135 223, 55, 55A, 55B 142, 142A, 142B, 400 Termination Type Body Plating Dielectric Style Dim. L Hex Crimp Nickel Polyethylene Commercial O Crimp Nickel Polyethylene Commercial 33.53 1.320 27.69 1.090 33.74 1.328 33.33 1.312 33.53 1.320 33.33 1.312 33.33 1.312 27.69 1.280 43.64 1.718 33.33 1.312 27.69 1.090 30.18 1.188 33.33 1.312 O Crimp Nickel TEFLON MIL Type Single Crimp Silver TEFLON MIL Type Hex Crimp Nickel Polyethylene Commercial O Crimp Nickel Polyethylene Commercial O Crimp Nickel TEFLON MIL Type O Crimp Nickel Polyethylene Commercial O Crimp Nickel TEFLON MIL Type Single Crimp Silver TEFLON MIL Type O Crimp Nickel Polyethylene Commercial O Crimp Nickel TEFLON MIL Type Single Crimp Silver TEFLON MIL Type 14.53 [.572] Dia. Max. CERTI-CRIMP Hand Tool with Integral Die Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 L Max. Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 Part No. -- 58436-12 -- 5221128-13 220187-1 58435-11 220217-1 5227079-5 269478-1 220189-3 69727- 5225395-1 2-- 91904-4 69223-1 2-5329444-1 -- 58436-12 -- 1-5221128-0 220217-1 4-5227079-3 69727- 4-5225395-2 220187-1 58435-11 269478-1 220189-3 220187-1 58435-11 269478-1 -- 220217-1 5227079-6 220189-3 69727- 5225395-3 91904-3 69424- 2-5329444-2 220217-1 6-5227079-1 220187-1 58435-11 269478-1 220189-3 69727- 269331-1 -- 69429-1 5225395-6 2-5330358-2 Consult Tyco Electronics for recommended crimp tooling. 1Order Tyco Electronics PRO-CRIMPER Coaxial "O" Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. 2Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. 3Bulk packaged. BELDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. COMM/SCOPE is a trademark of Commscope, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 48 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Plugs, Crimp (Continued) Single Crimp Hex and O Crimp L Max. 14.53 [.572] Dia. Max. RG/U Cable 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269 Termination Type Body Plating Dielectric Style Dim. L Hex Crimp Nickel Polyethylene Commercial 14.53 [.572] Dia. Max. L Max. CERTI-CRIMP Hand Tool with Integral Die Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 Part No. -- 58436-12 -- 1-5221128-1 220187-2 58435-11 220217-2 5227079-7 220187-2 58435-11 220217-2 1-5227079-1 -- 58537-1 -- 5225395-2 69141-1 -- -- 2-5329445-1 O Crimp Nickel Polyethylene Commercial O Crimp Nickel Polyethylene Commercial O Crimp Nickel TEFLON MIL Type Single Crimp Silver TEFLON MIL Type 33.53 1.320 27.69 1.090 27.69 1.090 30.18 1.188 33.33 1.312 Nickel Polyethylene Commercial 33.53 1.320 -- 58436-12 -- 1-5221128-1 Nickel TEFLON MIL Type 34.14 1.344 69477-1 58537-1 69669-1 4-5225395-1 Nickel Polyethylene Commercial 33.33 1.312 -- 58537-1 -- 5-5227079-3 Nickel Polyethylene Commercial 33.53 1.320 -- 58436-12 -- 1-5221128-7 Nickel TEFLON MIL Type 30.94 1.218 -- 258537-1 69669-1 2-5225395-0 Silver Polypropylene MIL Type 41.50 1.634 69652- -- 220000-1 5330878 Silver TEFLON MIL Type 27.31 1.075 47.63 1.875 47.63 1.875 47.63 1.875 52.38 2.062 220015-1 -- -- 5225886-1 220015-1 -- -- 5225886-4 220015-1 -- -- 5225886-7 220015-1 -- -- 220015-1 -- -- 302, BELDEN 88241, 89269, Hex Crimp Hi-Temp 62A, Times PL62, BERK-TEK, BTDC-59, O Crimp BTDC-62 Hi-Temp 59, Times PL59, O Crimp PLF59 (20 AWG C.C.) BELDEN 9104, 9240, Hex Crimp 9112, 9167, 9259, 9266, Times O Crimp FM-59 BELDEN 8281, 9141, 9231, Single Crimp Western Electric 724, 728, 3049 8, 8A, O Crimp 213 11, 11A O Crimp Silver TEFLON MIL Type BELDEN 9914, Times FM-8 Alpha 9847, BELDEN 8213, 9292 9, 9A, 9B, 214 O Crimp Silver TEFLON MIL Type O Crimp Silver TEFLON MIL Type O Crimp Silver TEFLON MIL Type 225886-5 5225886-1 1Order Tyco Electronics PRO-CRIMPER Coaxial "O" Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. 2Tyco Electronics PRO-CRIMPER II Hand Tool Frame without dies Part No. 354940-1 2Order BELDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 49 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Plugs, Twist-On Related Product Data Twist-On plugs must be used with cable that has a solid conductor. These plugs are not recommended for applications where the cable frequently moves or flexes. 38.10 [1.500] 14.53 [.572] Dia. Max. RG/U Cable 59, 59A, 59B Mating Twist-On Jack -- Page 52 Right-Angle Plugs, Crimp Contact Plating Body Plating Dielectric Style Part No. Nickel Polymethylpentene Commercial 5414265-3 Gold Single Crimp Hex and O Crimp 26.57 [1.046] 26.57 [1.046] L Max. L Max. 14.53 [.572] Dia. Max. RG/U Cable 174, 188, 188A, 316 179, 179A, 179B, 161, 187, 187A, BELDEN 9221 180, 180A, 180B, 195, 195A BELDEN 9907, 89907, 8219, COMM/SCOPE 2104, 3104 58, 58A, 58B, 58C 55, 55A, 55B, 223 142, 142A, 142B, 400 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269 14.53 [.572] Dia. Max. CERTI-CRIMP Hand Tool with Integral Die Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 Part No. -- 58436-3 -- 5413959-3 -- 91910-1 69422- 5331178-0 39.45 1.553 -- 58436-3 -- 5413959-4 Commercial 39.45 1.553 -- 58436-3 -- 5413959-5 Polymethylpentene Commercial 39.45 1.553 -- 58436-1 -- 5413959-6 Nickel Polymethylpentene Commercial -- 58436-1 -- 5413959-1 Gold Nickel TEFLON MIL Type 69478-1 220189-3 69727-1 5225974-1 Single Crimp Gold Silver TEFLON MIL Type -- 91904-1 69223-1 5331175-0 O Crimp Gold Nickel TEFLON MIL Type 69478-1 220189-3 69727-1 5225974-2 Single Crimp Gold Silver TEFLON MIL Type -- 91904-3 69429-1 5331182-0 Single Crimp Gold Silver TEFLON MIL Type 39.45 1.553 37.29 1.468 44.45 1.750 37.29 1.468 44.45 1.750 44.45 1.750 69331-1 -- 69429-1 5331182-0 O Crimp Gold Nickel TEFLON MIL Type 37.29 1.468 -- 58537-1 69669-1 5225974-5 Termination Type Center Contact Plating Body Plating Dielectric Style Dim. L Hex Crimp Gold Nickel Polymethylpentene Commercial Single Crimp Gold Silver TEFLON MIL Type 39.45 1.553 44.45 1.750 Hex Crimp Gold Nickel Polymethylpentene Commercial Hex Crimp Gold Nickel Polymethylpentene Hex Crimp Gold Nickel Hex Crimp Gold O Crimp BELDEN is a trademark of Belden Wire and Cable Company. COMM/SCOPE is a trademark of Commscope, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 50 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Jacks, Crimp Single Crimp Hex and O Crimp 11.1 [.437] Dia. Max. RG/U Cable 174, 188, 188A, 316 179, 179A, 179B, 161, 187, 187A, BELDEN 9221 58, 58A, 58B, 58C 223, 55, 55A, 55B 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269 1Order 11.08 [.436] Dia. Max. L Max. CERTI-CRIMP Hand Tool with Integral Die Termination Type Center Contact Plating Body Plating Dielectric Style Dim. L Hex Crimp Gold Nickel Commercial O Crimp Gold Nickel Polymethylpentene Polypropylene Commercial O Crimp Gold Nickel TEFLON MIL Type Single Crimp Gold Silver TEFLON MIL Type 33.02 1.300 30.48 1.200 -30.48 1.200 33.33 1.312 Hex Crimp Gold Nickel Polymethylpentene Commercial -33.02 1.300 -- O Crimp Gold Nickel Polypropylene Commercial O Crimp Gold Nickel TEFLON MIL Type Single Crimp Gold Silver TEFLON MIL Type 30.48 1.200 30.48 1.200 33.33 1.312 O Crimp Gold Nickel Polypropylene Commercial O Crimp Gold Nickel TEFLON MIL Type Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 -- 58436-3 -- L Max. Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 Part No. -- 5413779-3 1424050-1 220217-3 5228979-7 -- 1424050-1 220026-1 5225396-7 -- -- 69422- 2-5330062-1 58436-3 -- 2-5413779-4 220187-1 58435-11 220217-1 5228979-5 2-- 91901-1 69727- 5225396-11 69140-2 91904-3 69424- 30.48 1.200 220187-2 58435-11 220217-2 5228979-6 30.48 1.200 -- 58537-1 269669-1 5225396-2 2-5329452-2 Tyco Electronics PRO-CRIMPER Coaxial "O" Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 51 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Jacks, Twist-On Related Product Data Twist-on jacks must be used with cable that has a solid conductor. These jacks are not recommended for applications where the cable frequently moves or flexes. 40.14 Max. [1.580] Mating Twist-On Plug -- Page 50 RG/U Cable 59, 59A, 59B Center Contact Gold Body Plating Nickel Dielectric Style Part No. Acetal Commercial 222428-1 Panel Jacks, Crimp 11.2 [.441] Dia. 12.7 0.1 [.500 .004] 17.84 Max. [.702] 12.7 0.1 [.500 .004] 28.96 [1.140] Max. 2.77 Dia. [.109] Recommended Panel Cutout RG/U Cable Termination Type Center Contact Plating 174, 188, 188A, 316 58, 58A, 58B, 58C 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269, 89269 O Crimp O Crimp Gold Gold Nickel Nickel TEFLON TEFLON MIL Type MIL Type -- -69478-1 Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 1424050-1 91901-1 O Crimp Gold Nickel TEFLON MIL Type -69477-1 258537-1 Body Plating Dielectric Style CERTI-CRIMP Hand Tool with Integral Die Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 220026-1 69727- 5225397-7 5225397-1 269669-1 5225397-2 Part No. BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 52 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Bulkhead Jacks, Crimp Single Crimp Hex and O Crimp Note: Panel Insulating Bushings -- Page 54 H H L Max. L Max. +0.13 12.83 -0.00 Dia. [.505 +.005 ] 12.82 [.505] Dia. Min. Recommended Panel Cutouts -.000 11.04 [.435] Min. Maximum Panel Thickness 3.18 [.125] +0.08 5.54 -0.00 [.218 +.003 ] -.000 H = 11/16" across flats, 20.32 [.800] Max. across points RG/U Cable 174, 188, 188A, 316 Termination Type Center Contact Plating Body Plating Dielectric Style Dim. L Hex Crimp Gold Nickel Commercial O Crimp Gold Nickel Polymethylpentene Polypropylene Commercial O Crimp Gold Nickel TEFLON MIL Type Single Crimp Gold Silver TEFLON MIL Type 36.83 1.450 34.93 1.375 35.71 1.406 32.13 1.265 35.71 1.406 32.13 1.265 35.71 1.406 179, 179A, 179B, 161, 187, 187A, BELDEN 9221 O Crimp Gold Nickel TEFLON MIL Type Single Crimp Gold Silver TEFLON MIL Type Times RD316 O Crimp Gold Nickel TEFLON MIL Type CERTI-CRIMP Hand Tool with Integral Die -- Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 58436-3 Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 Part No. -- 5413771-3 -- -- 220217-3 5228980-7 -- -- 220026-1 5225398-7 -- -- 69422- -- 1424050-1 220026-1 -- 91910-1 69408- 2-5329458-1 -- 91904-1 69669-2 1-5225398-5 2-5330063-1 5225398-8 BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 53 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Bulkhead Jacks, Crimp (Continued) Single Crimp Hex and O Crimp Note: Panel Insulating Bushings -- at the bottom of this page L Max. H H L Max. +0.13 12.83 -0.00 Dia. [.505 +.005 ] 12.82 [.505] Dia. Min. -.000 Recommended Panel Cutouts 11.04 [.435] Min. Maximum Panel Thickness 3.18 [.125] +0.08 5.54 -0.00 [.218 +.003 ] -.000 H = 11/16" across flats, 20.32 [.800] Max. across points Style Dim. L CERTI-CRIMP Hand Tool with Integral Die Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 Part No. Polymethylpentene Commercial 36.83 1.450 -- 58436-1 -- 5413771-1 Nickel Polypropylene Commercial 220187-1 58435-11 220217-1 5228980-5 Gold Nickel TEFLON MIL Type -- 91901-1 69727- 5225398-1 Single Crimp Gold Silver TEFLON MIL Type -- 91904-4 69223-1 2-5329456-1 O Crimp Gold Nickel TEFLON MIL Type -- 91901-1 69727- 5225398-3 O Crimp Gold Nickel TEFLON MIL Type 34.93 1.375 41.28 1.625 32.13 1.265 35.71 1.406 35.71 1.406 -- 91901-1 69727- 5225398-6 O Crimp Gold Nickel Polypropylene Commercial 34.93 1.375 220187-2 58435-11 220217-2 5228980-6 RG/U Cable Termination Type Center Contact Plating Body Plating Dielectric 58, 58A, 58B, 58C, BELDEN 88240, BERK-TEK BTDC-58, COMM/SCOPE 2135 Hex Crimp Gold Nickel O Crimp Gold O Crimp 58, 58A, 58B, 58C 223, 55, 55A, 55B 142, 142A, 142B, 400 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269 1Order Tyco Electronics PRO-CRIMPER Coaxial "O" Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. Panel Insulating Bushings for Bulkhead Jacks 0.89 [.035] 12.93 [.509] Dia. 0.81 [.032] 5.46 [.215] 14.730.13 [.580.005] Dia. 13.95 [.549] Dia. Material -- Nylon 14.10.08 [.555.003] Note: Can not be used with single crimp bulkhead jacks. BELDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. COMM/SCOPE is a trademark of Commscope, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company. 17.45 [.687] Dia. 14.58 Dia. [.574] Recommended Panel Cutout Part No. 330620 (2 Required) Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 54 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Plugs, for JIS Cables, Crimp Plating Body -- Nickel Center Contact -- Gold 14.53 [.572] Dia. Max. Bulkhead Solder Jacks, Front Mount JIS Cable Termination Type 3D-2V Hex Crimp L Max. Dielectric Dim. L Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Part No. Polyethylene 33.53 1.320 58436-1 3-5221128-1 Without Solder Terminal With Solder Terminal Body Plating -- Nickel 22.23 [.875] 9.65/9.75 [.380/.384] Dia. Accepts 1.5 [.059] Dia. Max. Wire 3/8" - 32 Thread Accepts 1.5 [.059] Dia. Max. Wire 3/8" - 32 Thread .396/4.04 [.156/.159] Recommended Panel Cutout L Max. W Dia. Max. Contact Material Dielectric Silver VALOX VALOX Gold TEFLON Tin TEFLON is a trademark of E.I. Dupont de Nemours and Company. VALOX is a trademark of General Electric Company. VALOX Dimensions L W 26.93 1.060 33.33 1.312 26.93 1.060 33.33 1.312 26.93 1.060 33.33 1.312 26.93 1.060 L Max. W Dia. Max. 13.09 .515 13.09 .515 13.09 .515 13.09 .515 13.09 .515 13.09 .515 13.09 .515 Panel Thickness Insulating Bushing 1.17-3.18 .046-.125 1.17-6.35 .046-.250 1.17-3.18 .046-.125 1.17-6.35 .046-.250 1.17-3.18 .046-.125 1.17-6.35 .046-.250 1.17-3.18 .046-.125 227223-1 or 221951-1 227223-1 or 221951-1 227223-1 or 221951-1 227223-1 or 221951-1 227223-1 or 221951-1 227223-1 or 221951-1 227223-1 or 221951-1 Part No. Without Solder With Solder Terminal* Terminal** 5227754-3 5227755-3 -- 5227169-7 5227754-2 5227755-2 5227169-4 5227169-8 5227715-3 5227716-3 -- 5227169-5 5227754-1 5227755-1 **Includes lockwasher and jam nut. **Includes solder terminal and jam nut. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 55 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Insulating Bushings 1.09 Max. [.043] 11.43 [.450] 4.04 Max. [.159] 0.94 [.030] Max. 1.78 [.070] 10.93 Dia. [.430] 14.86 Dia. [.585] 3.94 Dia. [.155] 12.7 [.500] Dia. 0.81 [.032] 11.94 [.470] 9.53 Dia. [.375] 15.88 Dia. [.625] 9.53 [.375] Part No. 227223-1 Part No. 221951-1 11.56 0.08 [.455 .003] Dia. 12.83 0.08 [.505 .003] Dia. 10.97 0.06 [.432 .003] 12.070.08 [.475 .003] Recommended Panel Cutout Recommended Panel Cutout 3/8" - 24 Thread Isolated Bulkhead Solder Jacks, Front Mount Accepts 1.5 [.059] DIa. Max. Wire Plating Body -- Nickel Dielectric -- White VALOX Center Contact Plating Tin Silver Gold Flange & Thread Material VALOX VALOX VALOX Part No. 5227726-1 5227726-2 5227726-3 +0.13 9.91 -0.20 Dia. [.390 +.005 ] -.000 3.89 [.153 31.75 Max. [1.250] 13.09 Dia. [.515] Max. +0.08 -0.00 +.003 ] -.000 Panel Thickness 1.17-6.35 [.046-.250] Recommended Panel Cutout 3/8" - 24 Thread +0.08 Plating Body -- Nickel Center Contact -- Silver Dielectric -- Black VALOX Flange & Thread Material -- Black VALOX 9.60 -0.00 Dia. [.378 +.003 ] -.000 12.83 [.505] Max. 3.94 [.155 26.80 [1.055] Max. Panel Thickness 1.17-3.18 [.046-.125] Recommended Panel Cutout Part No. 5414194-1 Sealed Bulkhead Solder Jack, Rear Mount Plating Body -- Nickel Center Contact -- Gold Dielectric -- Polymethylpentene This connector is designed to prevent moisture from entering the interface from the rear of the connector. VALOX is a trademark of General Electric Company. +0.08 -0.00 +.003 ] -.000 Rubber Gasket +0.13 17.78 Dia. [.700] Max. 1/2" - 28 Thread 12.83 -0.00 Dia. [.505 +.005 ] -.000 Accepts . 1.5 [.059] DIa. Max. Wire +0.08 5.54 -0.00 [.218 +.003 ] 31.75 [1.250] Max. -.000 Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout Part No. 5227426-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 56 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Right-Angle Jacks PC Board/Panel Mount VALOX Body Metal Body 1/2-28 Thread 1/2-28 Thread C Mtg. Hgt. Body -- Nickel Dielectric -- Polymethylpentene C L A C Mtg. Hgt. C L B A B 34.93 [1.375] 34.93 [1.375] Mounting Post Style Body Material Center Contact Plating Dimensions Tin L VALOX, White Gold1 Gold1 Tin Compliant Post VALOX, Black Gold1 Gold1 Gold1 E L Tin Gold1 Metal Gold1 +0.13 12.83 -0.00 Dia. [.505 +.005 ] Gold2 -.000 High Temp. Housing +0.08 5.54 -0.00 Dia. [.218 +.003 ] Gold1 A B C 8.59 .338 8.59 .338 6.91 .272 8.59 .338 8.59 .338 6.91 .272 6.17 .243 8.26 .325 8.26 .325 6.91 .272 6.91 .272 6.91 .272 21.21 .835 21.21 .835 21.21 .835 21.21 .835 21.21 .835 21.21 .835 21.21 .835 20.83 .820 20.83 .820 20.83 .820 20.83 .820 21.21 .835 15.88 .625 15.88 .625 13.18 .519 15.88 .625 15.88 .625 13.18 .519 11.68 .460 15.88 .625 15.88 .625 12.70 .500 12.70 .500 13.18 .519 Part No. Without With L Mounting Posts Mounting Posts 3.48 5226990-1 5227161-1 .137 3.48 5226990-3 5227161-3 .137 3.48 -- 5227161-7 .137 3.48 -- 5227161-2 .137 3.48 5226990-6 5227161-6 .137 3.48 -- 5227161-9 .137 -- With Compliant Posts L -- -- -- -- -- -- -- -- -- -- -- -- 5415046-1 -- -- -- -- 5227661-1 -- -- 5227676-1 5227677-1 -- -- 1274668-1 5413879-1 -- -- -- 5413879-2 3.48 .137 3.48 .137 3.48 .137 3.48 .137 -- -- -- -- -- 5415218-5 2.79 .110 Plating: Gold1 -- 0.00076 [.000030] thick Gold2 -- 0.00127 [.000050] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. -.000 Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Lockwasher and Jam Nut Without Mounting Posts 10.16 0.08 [.400 .003] With Mounting Posts 2.64 [.104] Dia. Clearance Hole for 2-56 Self-Tapping Screw* (2 Holes) 5.08 0.05 [.200 .002] 5.08 0.05 [.200 .002] G Part No. 1-329632-2 Part No. 1-329631-2 2.54 0.05 [.100 .002] S 10.16 0.08 [.400 .003] 5.08 0.05 [.200 .002] 5.08 0.05 Mating [.200 .002] Face Mating Face G 0.89 0.08 [.035 .003] 2.54 0.05 [.100 .002] (Top View) 2.01 0.05 [.079 .002] (2 Holes) S 0.89 0.08 [.035 .003] (Top View) Recommended PC Board Layouts VALOX is a trademark of General Electric Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 57 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Vertical Jacks PC Board/Panel Mount Plating Body -- Nickel Dielectric -- Polymethylpentene VALOX Body Metal Body L L 1/2-28 Thread 15.88 [.625] B +0.13 12.83 -0.00 Dia. [.505 +.005 ] -.000 Body Material +0.08 5.54 -0.00 Dia. [.218 +.003 ] -.000 Maximum Panel Thickness 6.1 [.240] VALOX, White Recommended Panel Cutout VALOX, Black 15.88 [.625] B 34.93 [1.375] Mtg. Hgt. Center Contact Plating Dim. B Dim. L Tin 21.21 .835 21.21 .835 21.21 .835 21.21 .835 20.83 .820 20.83 .820 3.48 .137 3.48 .137 3.48 .137 3.48 .137 3.48 .137 3.48 .137 Gold Tin Gold Tin Lockwasher and Jam Nut 1/2-28 Thread Metal Gold 34.93 [1.375] Mtg. Hgt. Part No. Without With Mounting Mounting Posts Posts 5226993-1 5227222-1 5226993-3 5227222-3 5226993-2 5227222-2 5226993-6 5227222-6 -- 5227671-1 -- 5227673-1 Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. Part No. 1-329632-2 Part No. 1-329631-2 Without Mounting Posts 5.08 [.200 With Mounting Posts 2.64 [.104] Dia. Clearance Hole for 2-56 Self-Tapping Screw* (2 Holes) 0.05 .002] 5.08 0.05 [.200 .002] 2.54 0.05 [.100 .002] 10.16 0.08 [.400 .003] G S 10.16 0.08 [.400 .003] 0.89 0.08 [.035 .003] 2.01 0.08 [.079 .003] (2 Holes) 5.08 0.05 [.200 .002] 2.54 0.05 [.100 .002] 10.16 0.08 [.400 .003] G S 10.16 0.08 [.400 .003] (Top View) 5.08 0.05 [.200 .002] 0.89 0.08 [.035 .003] (Top View) Recommended PC Board Layouts * Screw for board thickness of 2.38 [.093] or greater Part No. 221108-2. Screw for thickness of less than 2.38 [.093] Part No. 221108-4. VALOX is a trademark of General Electric Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 58 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Jacks with Mounting Flanges PC Board/Panel Mount 1/2-28 Thread 15.88 [.625] Mounting Height +0.13 12.83 -0.00 Dia. [.505 +.005 ] -.000 C L 8.59 [.338] 21.21 [.835] 34.93 [1.375] +0.08 5.54 -0.00 Dia. [.218 +.003 ] -.000 Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Body Material Center Contact Plating Tin Gold VALOX, White Part No. 5226978-1 5226978-3 Lockwasher and Jam Nut 3.3 [.130] Dia. Clearance Hole for 5-40 Screw 22.86 0.08 [.900 .003] 8.89 [.350] Part No. 1-329632-2 11.43 [.450] Part No. 1-329631-2 G S Mating Face 2.54 [.100] 0.89 0.08 [.035 .003] (Top View) Recommended PC Board Layout VALOX is a trademark of General Electric Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 59 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Vertical Metalized Jacks PC Board Mount Body Plating Recommended PC Board Layouts Style A Center Contact Plating Dielectric Style Silver VALOX A Gold VALOX A Tin VALOX A Gold VALOX A Silver VALOX C Gold VALOX E Gold TEFLON B Silver VALOX C Gold VALOX D L 12.7 0.08 [.500 .003] 6.35 0.05 [.250 .002] Nickel 12.7 0.08 [.500 .003] 17.45 Sq. [.687] 15.88 [.625] Drill Holes for 0.94 0.05 [.037 .002] Dia. Pin (5 Places) 6.35 0.05 [.250 .002] Tin-Lead 1With Style B L Leg Length L 6.35 .250 6.35 .250 6.35 .250 3.81 .150 4.45 .175 6.35 .250 3.30 .130 3.18 .125 3.43 .135 Part No. 5227699-1 5227699-2 5227699-3 5414460-11 5222420-1 5415189-1 5413969-2 5414305-1 5221123-2 .76 [.030] standoffs on top of legs. 6.88 0.08 [.271 .003] 1.50 0.08 Dia. [.059 .003] (4 Holes) 3.44 0.08 [.135 .003] 6.88 0.08 [.271 .003] 20.57 [.810] 1.02 0.08 Dia. [.040 .003] Style C 3.43 0.08 [.135 .003] Style D 6.88 0.05 [.271 .003] L 2.44 0.08 Dia. [.096 .003] (4 Holes) 3.43 0.05 [.135 .002] 6.88 0.05 [.271 .003] 4.32 [.170] 1.73 0.05 Dia. [.068 .002] 6.48 [.255] 1.32 0.08 Dia. [.052 .003] 3.73 [.147] 15.88 [.625] 16.64 [.655] 1.07 0.05 Dia. [.042 .002] L 7.47 [.294] Style E (Panel Mount) 12.70 0.08 [.500 .003] 6.35 0.06 [.250 .002] Drill Hole to Receive 0.940.06 [.037.002] Dia. Pin, 5 Required 20.78 0.38 [.818 .015] TEFLON is a trademark of E.I. Dupont de Nemours and Company. VALOX is a trademark of General Electric Company. L 12.70 0.08 [.500 .003] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 60 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Vertical Metalized Jacks, PC Board Mount 7.50 0.08 [.295 .003] Signal Contact Hole 1.00 0.08 [.039 .003] 2 Plcs. 24.00 [.945] Switching Contact 1.70 0.10 Hole [.067 .004] 2.50 0.08 [.098 .003] 4 Plcs. 10.72 0.25 [.422 .010] 3.00 0.10 [.118 .004] 1.50 0.08 [.059 .003] 2 Plcs. 10.70 0.08 [.421 .003] Recommended PC Board Layout Part No. 1274314-1 (Switching) 3.75 0.08 [.148 .003] 1.00 0.08 [.039 .003] 24.00 [.945] 1.70 0.10 [.067 .004] 2.50 0.08 [.098 .003] 3 Plcs. 3.00 0.10 [.118 .004] 1.50 0.08 [.059 .003] 2 Plcs. 10.72 0.25 [.422 .010] 10.70 0.08 [.421 .003] Part No. 1274315-1 Body Plating Tin Tin Recommended PC Board Layout Contact Plating Silver Silver Dielectric Polyphenylene Polyphenylene Press Fit Vertical Metalized Jack, PC Board Mount Part No. 6274314-1 6274315-1 Insulating Bushing 6.88 0.05 [.271 .002] 11.94 Dia. [.470] Max. +0.08 1.5 -0.10 [.059 +.003 ] -.004 Dia. 4 Holes 3.43 0.05 [.135 .002] 6.88 0.05 [.271 .002] 20.57 [.810] Max. 1.02 0.08 Dia. [.040 .003] Material -- Polypropylene Part No. 222163-1 Only to be used on Part Nos. 5222006-1 & 5222462-1 14.61 Dia. [.575] Recommended PC Board Layout PC Board Thickness Not Less Than 0.99 [.093] 11.94 [.470] Dia. 2.96 [.115] Max. 6.61 [.260] Max. Part No. 5222006-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 61 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Right-Angle Metalized Jacks, PC Board Mount 6.6 0.08 [.260 .003] 10.97 [.432] Mounting Height 3.3 0.08 [.130 .003] C L 0.08 .003] 2.11 [.083 Dia. (4 holes) 6.6 0.08 [.260 .003] 6.15 [.242] 1.17 0.08 Dia. [.046 .003] 27.64 0.51 [1.088 .020] Body Plating Dielectric Nickel Polymethylpentene Tin TEFLON Nickel Polymethylpentene Center Contact Length 4.34 .171 4.34 .171 3.33 .131 Part No. 5413631-1* 5413631-2* 5413631-3* Maximum PC Board Thickness 2.54 [.100] Recommended PC Board Layout 1.19 0.18 Dia. [.047 .007] 3.81 0.08 [.150 .003] 8.64 [.340] 7.62 0.08 [.300 .003] 21.85 [.860] 25.40 [ 1.000] 7.62 0.08 [.300 .003] Body Dielectric Contact Nickel TPX Gold Part No. 5414373-1 1.78 0.08 Dia. [.070 .003] 2 Holes Recommended PC Board Layouts 6.6 0.08 [.260 .003] Right-Angle Metalized Jacks, PC Board/Panel Mount 3.3 0.08 [.130 .003] 27.64 0.51 [1.088 .020] 6.15 0.25 [.242 .010] 11.66 [.459] 2.11 0.08 Dia. [.083 .003] 4 holes 6.6 0.08 [.260 .003] 10.97 0.18 [.432 .007] 1.17 0.08 Dia. [.046 .003] Body Plating Tin Tin Dielectric TEFLON TPX Part No. 5415025-2 5415025-1 +0.13 12.83 -0.00 Dia. [.505 +.005 ] -.000 1/2-28 Thread 4.34 [.171] +0.08 5.64 -0.00 Dia. [.222 +.003 ] Lockwasher and Jam Nut see page 59. -.000 Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout TEFLON is a trademark of E.I. Dupont de Nemours and Company. TPX is a trademark of Mitsui Chemicals America, Inc. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 62 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Tee Adapters Style A Style B Style C (Jack-Plug-Jack) With Insulated Cover (Jack-Plug-Jack) (Jack-Jack-Jack) D D Insulation Material Polyphenylene oxide D F E E E F Style Body Material and Plating Brass, Nickel A B C Center Contact Material and Plating BE CU, Gold (30)2 PH BR, Gold (15)2 BE CU, Gold (30)2 PH BR, Gold (15)2 BE CU, Silver (200)2 BE CU, Gold (30)2 BE CU, Silver (200)2 PH BR, Gold (50)2 Zinc, Nickel Zinc, Nickel Brass, Nickel Zinc, Nickel Dielectric TEFLON Acetal Acetal Acetal Acetal Acetal TEFLON Acetal D 32.54 1.281 33.02 1.300 33.02 1.300 33.02 1.300 33.02 1.300 32.54 1.281 32.54 1.281 32.54 1.281 Dimensions E 26.19 1.031 27.31 1.075 27.31 1.075 27.31 1.075 27.31 1.075 31.12 1.225 23.37 .920 23.62 .930 Comparable UG/U Connector F 14.27 .562 14.50 .571 14.50 .571 14.50 .571 14.50 .571 17.15 .675 274A -- -- -- -- 1 -- -- -- -- -- Packaging No. Per Pkg. Bulk (100) Bulk (100) Bulk (100) Individual (1) 3 Individual (1) Bulk (100) Bulk (100) Bulk (100) Part No. 221543-2 5413592-2 5413592-6 5413592-9 1-5413592-1 5413366-21 221988-1 5414311-1 Gray insulation cover (Microinches min thickness) (Special graphics) 1 2 3 Tee Adapter Covers 114.55 0.76 [4.510 .030] Material -- Polypropylene, general purpose Color Part No. Black 221586-1 Ivory 221586-3 15.11 [.595] Dia. TEFLON is a trademark of E.I. Dupont de Nemours and Company. 5.08 Dia. [.200] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 63 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Jack-Jack Adapters Style B Style A Nickel Nickel Center Contact Plating Silver Gold Nickel Gold Body Plating 35.81 [1.410] 32.54 [1.281] Bulkhead Jack-Jack Adapters +0.13 12.83 -0.00 Dia. [.505 +.005 ] -.000 L Max. H Max. Body Plating Center Contact Plating Nickel Silver Nickel Gold1 Nickel Gold2 Dielectric Style Part No. TEFLON TEFLON Polymethylpentene A A 221551-1 221551-3 B 5414414-1 Dimensions H L 17.45 .687 17.78 .700 17.78 .700 38.10 1.500 36.07 1.420 36.07 1.420 Dielectric Part No. TEFLON 330024- Polyethylene Polyethylene 5228226-1 5228226-3 Plating: Gold1 -- 0.00127 [.000050] thick Gold2 -- 0.00076 [.000015] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. +0.06 5.54 -0.00 [.218 +.003 ] -.000 Recommended Panel Cutout H= 11/16 across flats, 20.32 [.800] across points. Isolated Bulkhead Jack-Jack Adapter Body Plating Nickel Center Contact Plating Gold +0.13 12.83 -0.00 Dia. [.505 +.005 ] -.000 Dielectric Part No. Polymethylpentene 5414105-1 +0.06 5.54 -0.00 Dia. [.218 +.003 ] 36.07 [1.420] 15.87 [.625] -.000 Recommended Panel Cutout H= 11/16 across flats, 20.32 [.800] across points. Plug-Plug Adapter 31.8 Ref. [1.252] Right-Angle Adapters Nickel Nickel Nickel Center Contact Plating Silver Gold Gold Body Plating Nickel Part No. 415796-1 14.53 Dia [.572] Max. (Jack-Plug) Body Plating Contact Plating Gold Dielectric Part No. TEFLON TEFLON Polymethylpentene 5329517-1 5222165-2 5414666-1 TEFLON is a trademark of E.I. Dupont de Nemours and Company. 22.89 [.901] Max. 26.97 [1.062] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 64 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Terminator Plugs 50, 75, 93 Ohm Resistor Specification Tether Plating 1 Watt, 50 Ohm 1 Watt, 75 Ohm 1 Watt, 93 Ohm 0.5 Watt, 75 Ohm 1 Watt, 50 Ohm Body -- Nickel Center Contact -- Gold Dielectric -- Polyethylene 14.53 Dia. [.572] Max. 33.02 [1.300] 1 Part No. With Tether Without Tether 5221629-11 5221629-4 5221629-21 5221629-5 -- 5221629-6 -- -- 1-5221629-61 -- Tether is conductive with #4 stud size #6 Stud Size Insulated Terminators Long Cover Insulation Material Polyphenylene oxide 38.10 Max. [1.500] 38.10 Max. [1.500] 17.40 [.685] 17.40 [.685] Register Specification 1 Watt, 50 Ohm Color Gray Black Cover Style Long Short Long Short Cover* Part No. 5413557-1 5413364-2 5413557-2 * The Short Cover is required when mating the Terminator with a Tee Adapter. Jack Covers Shorting Caps 22.10 Max. [.870] 14.53 Dia. [.572] Max. Body Plating Silver Nickel Plating Body -- Nickel Center Contact -- Gold Part No. 330022 1-330022-2 15.24 [.600] 101.6 [4.000] 14.53 [.572] Dia. Max. #6 Stud Size Part No. 413453-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 65 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm Plugs, Crimp Hex and O Crimp These connectors have been designed for optimum performance and have a true 75 ohm impedance the complete length of the connector. The crimp die tooling listed below is different from the equivalent 50 ohm connectors. 14.53 [.572] Dia. Max. L Max. Plugs Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 58425-2 -- 5413589-8 318451-2 -- 5221185-8 58425-2 -- 1-5413589-0 58174-1 58248-3 1-5221185-8 58425-2 -- 5413589-3 58174-1 58248-3 5221185-3 58425-1 -- 5413589-2 58536-1 58248-2 5221185-2 RG/U Cable Termination Type Center Contact Plating 179, 179A, 179B, 187, 187A, 161, BELDEN 9221 Hex Crimp Gold Nickel Polyethelene Commercial O Crimp Gold Nickel Polyethelene Commercial Hex Crimp Gold Nickel Polyethelene Commercial O Crimp Gold Nickel Polyethelene Commercial Hex Crimp Gold Nickel Polyethelene Commercial O Crimp Gold Nickel Polyethelene Commercial Hex Crimp Gold Nickel Polyethelene Commercial O Crimp Gold Nickel Polyethelene Commercial 29.46 1.160 35.56 1.140 29.46 1.160 27.69 1.090 29.46 1.160 27.69 1.090 29.46 1.160 27.69 1.090 Hex Crimp Gold Nickel Polyethelene Commercial 29.46 1.160 58425-1 -- 5413589-1 Hex Crimp Gold Nickel Polyethelene Commercial 29.46 1.160 58425-1 -- 5413589-9 O Crimp Gold Nickel Polyethelene Commercial 27.69 1.090 58536-1 58248-2 5221185-9 Hex Crimp Gold Nickel Polyethelene Commercial 58425-1 -- 5413589-7 58536-1 -- 1-5221185-0 58536-1 -- 5221185-1 58538-1 58248-1 5221185-7 Body Plating Dielectric Style Dim. L AT&T 735A BELDEN 8218 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269 302, BELDEN 89269, 88241, Hi-Temp 62A, Times PL-62, Berk Tek BTDC-59, BTDC-62 BELDEN 8212, 9104, 9112, 9167, 9240, 9259, 9266, Times FM-59, (RG 59 Type with 20 AWG C.C.) Part No. O Crimp Gold Nickel Polyethelene Commercial BELDEN 9248, 9114 O Crimp Gold Nickel Polyethelene Commercial 6, 6A O Crimp Gold Nickel Polyethelene Commercial 29.46 1.160 27.69 1.090 25.65 1.010 37.85 1.490 Hex Crimp Gold Nickel Polyethelene Commercial 29.46 1.160 58425-3 -- 5413589-5 O Crimp Gold Nickel Polyethelene Commercial 28.45 1.120 58538-1 58248-1 5221185-5 28.96 1.140 28.96 1.140 58536-1 -- 2-5221185-9 58536-1 -- 3-5221185-1 BELDEN 9145, AT&T 734A BELDEN 8281, 9141, 9231, Western Electric 724, 728, 3049 COMM/SCOPE S59 Hec COMM/SCOPE F59 Hec-z O Crimp Gold Nickel Polyethelene Commercial O Crimp Gold Nickel Polyethelene Commercial AT&T is a trademark of AT&T Corporation. BELDEN is a trademark of Belden Wire and Cable Company. COMM/SCOPE is a trademark of Commscope, Inc. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 66 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Plugs for JIS Cables, Crimp Plating Body -- Nickel Center Contact -- Gold 14.53 [.572] Dia. Max. L Max. JIS Cable Termination Type Dielectric 3C-2V Hex Crimp Polymethylpentene 2.5C-2V Hex Crimp Polymethylpentene Dim. L Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Part No. 58425-1 1-5413589-1 58425-2 1-5413589-6 Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Part No. 58425-2 5413590-4* 29.46 1.160 29.46 1.160 Bulkhead Jacks for JIS Cables, Crimp Plating Body -- Nickel Center Contact -- Gold Dielectric -- Polymethylpentene 20.32 [.800] Max. L Max. JIS Cable Termination Type Dielectric Dim. L 1.5C-2V Hex Crimp 75 36.83 1.450 *Packaged in 100 pieces per bag. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 67 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Right-Angle Plugs, Crimp Hex and O Crimp 27.18 Max. [1.070] L Max. 14.53 Dia. [.572] Max. RG/U Cable Termination Type Center Contact Plating Body Plating Dielectric Style Dim. L Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 179, 179A, 179B, 187, 187A, 161 BELDEN 9221 Hex Crimp Gold Nickel Polymethylpentene Commercial 39.45 1.553 58425-2 -- -5413588-8 AT&T 735A Hex Crimp Gold Nickel Polymethylpentene Commercial 39.45 1.553 58425-2 -- 1-5413588-0 Hex Crimp Gold Nickel Polymethylpentene Commercial 39.45 1.553 58425-2 -- 5413588-4 Hex Crimp Gold Nickel Polymethylpentene Commercial 39.45 11.553 58425-1 -- 5413588-2 O Crimp Gold Nickel Polymethylpentene Commercial 39.88 1.570 58536-1 58248-2 -5221402-2 Hex Crimp Gold Nickel Polymethylpentene Commercial 39.45 1.553 58425-1 -- 5413588-9 O Crimp Gold Nickel Polymethylpentene Commercial 39.88 1.570 58536-1 -- 5221402-4 AT&T KS 19224 L2, RD179 Double Braid 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269 BELDEN 8212, 9104, 9112, 9240, 9167, 9259, 9266, Times FM-59, (RG 59 Type with 20 AWG C.C.) BELDEN 9145, AT&T 734A Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 Part No. AT&T is a trademark of AT&T Corporation. BELDEN is a trademark of Belden Wire and Cable Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 68 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Jacks, Crimp Hex and O Crimp 11.08 Dia. [.436] Max. L Max. Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 58425-2 -- 5413760-8 318451-2 -- 5221199-5 58425-2 -- 5413760-3 RG/U Cable Termination Type Center Contact Plating 179, 179A, 179B, 161, 187, 187A, BELDEN 9221 Hex Crimp Gold Nickel Polyethelene Commercial O Crimp Gold Nickel Polyethelene Commercial BELDEN 8218 Hex Crimp Gold Nickel Polyethelene Commercial 33.02 1.300 30.48 1.200 33.02 1.300 O Crimp Gold Nickel Polyethelene Commercial 30.48 1.200 58536-1 58248-2 5221199-2 Hex Crimp Gold Nickel Polyethelene Commercial 33.02 1.300 58425-1 -- 5413760-1 Hex Crimp Gold Nickel Polyethelene Commercial 33.02 1.300 58425-1 -- 5413760-9 O Crimp Gold Nickel Polyethelene Commercial 30.48 1.200 58536-1 -- 5221199-1 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269 302, BELDEN 88241, 89269, Hi-Temp 62A, Times PL-62, Berk Tek BTDC-59, BTDC-62 BELDEN 8212, 9104, 9112, 9240, 9167, 9259, 9266, Times FM-59, (RG 59 Type with 20 AWG C.C.) BELDEN 9248, 9114 Body Plating Dielectric Style Dim. L Part No. BELDEN is a trademark of Belden Wire and Cable Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 69 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Bulkhead Jacks, Crimp Hex and O Crimp +0.13 12.83 -0.20 Dia. [.505 +.005 ] -.000 +0.08 5.54 -0.00 [.218 +.003 ] 34.93 Max. [1.375] 20.32 [.800] Max. -.000 Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 RG/U Cable Termination Type Center Contact Plating Body Plating Dielectric Style Dim. L 179, 179A, 179B, 161, 187, 187A, BELDEN 9221 Hex Crimp Gold Nickel Polyethelene Commercial 58425-2 -- 5413590-8 O Crimp Gold Nickel Polyethelene Commercial 36.83 1.450 34.93 1.375 318451-2 -- 5221221-5 AT&T KS 19224 L2, RD179 Double Braid Hex Crimp Gold Nickel Polyethelene Commercial 36.83 1.450 58425-2 -- 5413590-4 BELDEN 8218 Hex Crimp Gold Nickel Polyethelene Commercial 36.83 1.450 58425-2 -- 5413590-3 O Crimp Gold Nickel Polyethelene Commercial 34.93 1.375 58536-1 58248-2 5221221-2 O Crimp Gold Nickel Polyethelene Commercial 34.93 1.375 58536-1 58248-2 5221221-7 O Crimp Gold Nickel Polyethelene Commercial 34.93 1.375 58536-1 -- 5221221-1 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269 BELDEN 8212, 9104, 9112, 9240, 9167, 9259, 9266, Times FM-59 (RG 59 Type with 20 AWG C.C.) BELDEN 9114, 9248 Part No. AT&T is a trademark of AT&T Corporation. BELDEN is a trademark of Belden Wire and Cable Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 70 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Bulkhead Solder Jacks Front Mount Accepts .054 Dia. Max. Wire 27.43 Max. [1.083] Plating 27.43 [ 1.083] Accepts .054 Dia. Max. Wire Max. Body -- Nickel Center Contact -- Silver 3/8-32 Thread 3/8-32 Thread 9.75/9.65 [.384./380] Dia. 13.09 Dia. [.515] Max. 13.09 Dia. [.515] Max. Part No. 5415187-1 Part No. 5221244-1 (without Solder Terminal) (with Solder Terminal) Note: If insulating bushing required use part no. 227223-1 or 221951-1 (for details, reference page 55). Note: If insulating bushing required use part no. 227223-1 or 221951-1 (for details, reference page 55). 4.04/3.96 [.159/.156] Maximum Panel Thickness 3.18 [.125] Recommended Panel Cutout Bulkhead Jack PC Board Mount 3.30 [.130] O 12.70 0.1 [.500 .004] 11.07 Max. [.436] 20.8 [.820] 11.2 0.1 [.441 .004] Part No. 6274086-1 Bulkhead Solder Jack Rear Mount Accepts . .050 Dia. Max. WIre Lockwasher and Jam Nut see page 73. 17.78 Dia. [.700] Max. 1/2-28 Thread +0.13 12.83 -0.00 Dia. [.505 +.005 ] -.000 Plating Body -- Nickel Center Contact -- Gold Dielectric -- Polymethylpentene +0.08 5.54 -0.00 [.218 +.003 ] 31.75 Max. [ 1.250] -.000 Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout Part No. 5414217-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 71 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Right-Angle Jacks PC Board/Panel Mount VALOX Body Metal Body 1/2-28 Threads 1/2-28 Threads C Mtg. Hgt. C Mtg. Hgt. Outer Shell -- Nickel Dielectric -- Polymethylpentene Lockwasher and Jam Nut see page 73. C L C L A B +0.13 12.83 -0.00 Dia. [.505 +.005 ] Body Material -.000 L +0.13 5.54 -0.00 [.218 +.005 ] -.000 Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Recommended PC Board Layouts Without Mounting Posts 10.16 0.08 [.400 .003] 2.64 [.104] Dia. Clearance Hole for 2-56 Self-Tapping Screw* (2 Holes) 5.08 0.05 [.200 .002] 5.08 0.05 [.200 .002] G 2.54 0.05 [.100 .002] S Mating Face 0.89 0.08 [.035 .003] (Top View) With Mounting Posts 10.16 0.08 [.400 .003] 2.01 0.08 [.079 .003] (2 Holes) 5.08 0.05 [.200 .002] 5.08 0.05 Mating [.200 .002] Face G 2.54 [.100 0.05 .002] S 0.89 0.08 [.035 .003] (Top View) A B 34.93 [1.375] VALOX, Black w/ Compliant Posts (Economy)* VALOX, Black (Economy)* VALOX, White VALOX, White (Economy)* VALOX, Black Part No. Without With Mounting Posts Mounting Posts * -- 5415105-2 Center Contact Plating A Gold3 6.17 .243 21.21 .835 11.68 .460 2.79 .110 Gold3 6.17 .243 21.21 .835 11.68 .460 4.01 .158 * -- 5415105-1 Gold1 6.91 .272 21.21 .835 13.88 .519 3.48 .137 -- 5413194-1 5415634-2 Dimensions B C L Gold1 6.91 .272 21.21 .835 13.88 .519 3.48 .137 * -- Gold1 6.91 .272 6.91 .272 8.59 .338 8.59 .338 8.25 .325 8.25 .325 8.25 .325 6.91 .272 8.56 .337 8.25 .325 6.91 .272 6.91 .272 6.91 .272 21.21 .835 21.21 .835 21.21 .835 21.21 .835 20.83 .820 20.83 .820 20.83 .820 20.83 .820 21.21 .835 20.83 .820 20.83 .820 20.83 .820 20.83 .820 13.88 .519 13.88 .519 15.88 .625 15.88 .625 15.88 .625 15.88 .625 15.88 .625 12.70 .500 15.88 .625 15.88 .625 12.70 .500 12.70 .500 12.70 .500 3.48 .137 3.48 .137 3.48 .137 3.48 .137 2.16 .085 -- 5413194-2 -- 5415634-1 -- 5415633-1 -- 5414459-1 -- 5222092-1 -- 5222093-1 -- 3.48 .137 3.48 .137 3.48 .137 3.48 .137 3.48 .137 -- 5414409-1 -- 5415417-1 -- 5415419-1 -- 5222092-3 -- 5414907-1 -- 6274072-1 -- 3.48 .137 -- 6274084-1 Gold1 VALOX, Black (Economy)* Gold1 VALOX, White Gold2 Metal Gold1 Metal Gold1 Metal (Economy)* Gold1 Metal with Compliant Posts (Economy)* Gold1 Metal Gold1 Metal Gold1 Metal Gold1 Metal (Economy)* 34.93 [1.375] Tin Gold1 **Economy connector uses 50 part with smaller dielectric and stamped and formed contact, Phosphor Bronze contact material (Compare to regular connector which is 75 , screw machined Beryllium Copper). Plating: Gold1 -- 0.00076 [.000030] thick Gold2 -- 0.00127 [.000050] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. * Screw for panel thickness of 2.38 [3/32] or greater * Part No. 221108-2. * Screw for panel thickness of less than 2.38 [3/32] * Part No. 221108-4. VALOX is a trademark of General Electric Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 72 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Vertical Jacks PC Board/Panel Mount VALOX Body Metal Body L Plating L 1/2-28 Thread 1/2-28 Thread 15.88 [.625] Outer Shell -- Nickel Dielectric -- Polymethylpentene B 15.88 [.625] B 34.93 [1.375] Mtg. Hgt. 34.93 [1.375] Mtg. Hgt. +0.13 12.83 -0.00 Dia. [.505 +.005 ] -.000 5.54 [.218 +0.13 -0.00 +.005 ] -.000 Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Contact Plating Dim. B Dim. L Part No. Gold1 21.21 .835 3.48 .137 5415632-1 Gold1 21.21 .835 3.48 .137 5415632-2 Metal Gold1 Tin 3.48 .137 3.48 .137 5222132-1 Metal (Economy)* 20.83 .820 21.21 .835 5415520-1 *Economy connector uses 50 part with smaller dielectric and stamped and formed contact, Phosphor Bronze contact material (Compare to regular connector which is 75 , screw machined Beryllium Copper). Plating: Gold1 -- 0.00076 [.000030] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. Lockwasher and Jam Nut Part No. 1-329632-2 Body Material VALOX, Black (Economy)* VALOX, White (Economy)* Part No. 1-329631-2 2.01 0.08 [.079 .003] (2 Holes) 5.08 0.05 [.200 .002] * Screw for panel thickness of 2.38 [3/32] or greater * Part No. 221108-2. * Screw for panel thickness of less than 2.38 [3/32] * Part No. 221108-4. 2.54 0.05 [.100 .002] 10.16 0.08 [.400 .003] G S 10.16 0.08 [.400 .003] 5.08 0.05 [.200 .002] 0.89 0.08 [.035 .003] (Top View) Recommended PC Board Layout VALOX is a trademark of General Electric Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 73 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Vertical Metalized Jacks PC Board Mount Style A Style B Style C L L L Plating Dielectric -- TEFLON 17.45 Sq. [.687] 20.57 [.810] 16.64 [.655] 15.88 [.625] 6.88 0.08 [.271 .003] 12.7 0.08 [.500 .003] 6.35 0.05 [.250 .002] 3.44 0.08 [.135 .003] 1.50 0.08 [.059 .003] Dia. (4 Holes) 6.35 0.05 [.250 .002] 1.02 0.08 [.040 .003] Dia. 5.16 0.08 [.203 .003] 1.02 0.08 Dia. [.040 .003] 14.73 [.580] 5.16 0.08 [.203 .003] 2.54 5 Plcs. [.100] Press Fit Vertical Metalized Jacks PC Board Mount 2.44 0.08 Dia. [.096 .003] (4 Holes) 1.32 0.08 Dia. [.052 .003] 3.43 0.08 [.135 .003] Recommended PC Board Layout Style F (Push-On) 2.578 0.076 [.1015 .0030] 3.43 0.05 [.135 .002] 6.88 0.05 6.88 0.08 [.271 .003] [.271 .003] 12.7 0.08 [.500 .003] Drill Holes for 0.94 0.05 [.037 .002 ] Dia. Pin (5 Places) 6.88 0.05 [.271 .003] 2.06 0.05 Dia. [.081 .002] 4 Plcs. 11.49 Dia. [.470] Max. Body Plating Center Contact Plating Style Nickel Gold B Tin Gold B Tin Gold B Tin Gold C Nickel Silver A Tin Gold F Leg Length L 3.30 .130 3.30 .130 6.35 .250 4.44 .175 6.35 .250 2.54 .100 Part No. 6274291-2 6274291-1 6274359-1 5414394-1 5413986-1 6274360-1 6.88 0.1 [.271 +.003] -.004 3.43 [.135 6.88 [.271 0.05 .002] 1.5 0.1 Dia. [.059 +.004] -.003 (4 Plated-Thru Holes) 0.05 .002] 1.02 0.08 Dia. [.040 .003] (Plated-Thru Hole) A Max. Dim. A 20.57 .810 16.26 .640 Part No. 5222462-1 5414088-1 Recommended PC Board Layout Insulating Bushing Material -- Nylon Part No. 222163-1 Only to be used on Part Nos. 5222462-1 and 5222006-1 TEFLON is a trademark of E.I. Dupont de Nemours and Company. 14.61 Dia. [.575] 11.94 [.470] Dia. 2.96 Max. [.115] 6.61 Max. [.260] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 74 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Press Fit Vertical Metalized Jacks PC Board Mount 1.7 0.05 Dia. [.067 .002] (2 Places) For Drive Screw 17.48 Sq. [.688] (Continued) 12.7 0.05 [.500 .002] PC Board Thickness (Min.) 2.36 .093 3.17 .125 6.35 0.05 [.250 .002] 0.08 .003] 1.02 [.040 (Plated-Thru Hole 3 Places) Part No. 5221336-3 5221336-4 12.7 0.05 [.500 .002] 15.88 Max. [.625] 6.35 0.05 [.250 .002] Recommended PC Board Layout Press Fit, Bulkhead Vertical Metalized Jack 6.88 [.271] 4.37 0.51 [.172 .020] 5 Plcs. 10.80 [.425] includes hardware 3.43 [.135] 3.43 [.135] o 12.83 + 0.13 - 0.00 [o .505 + .005] - .000 28.78 [1.133] 24.41 [.961] 6.88 [.271] 5.54 + 0.08 - 0.00 [.218 + .003] - .000 O 1.02 0.08 [.040 .003] Holes Plated Through 5 Plcs. Part No. 6274124-2 Recommended PC Board Layout Right-Angle Metalized Jacks PC Board Mount 10.97 [.432] Mounting Height C L 6.15 [.242] 28.4 Max. [1.118] 6.6 0.08 [.260 .003] 3.3 0.08 [.130 .003] 6.6 0.08 [.260 .003] 2.11 0.08 [.083 .003] Dia. (4 holes) Body Plating Dielectric Contact Plating Nickel Tin Nickel Nickel TPX TEFLON TPX TPX Gold2 Gold2 Gold2 Gold1 Center Contact Dimension .171 [.007] .171 [.007] .131 [.005] .171 [.007] Part No. 5413558-1 5413558-2 5413558-3 5413558-5 Gold1 -- 0.00076 [.000030] thick Gold2 -- 0.00127 [.000050] thick 1.17 0.08 Dia. [.046 .003] Maximum PC Board Thickness 2.54 [.100] Recommended PC Board Layout 11.43 0.43 [.450 .017] 3.81 0.08 [.150 .003] 11.07 Max. [.436] 17.78 [.700] TEFLON is a trademark of E.I. Dupont de Nemours and Company. TPX is a trademark of Mitsui Chemicals America, Inc. 7.62 0.08 [.300 .003] 21.84 [.860] 25.40 0.38 [1.000 .015] 1.19 0.18 Dia. [.047 .007] 7.62 0.08 [.300 .003] 1.78 0.08 Dia. [.070 .003] Part No. 6274127-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 75 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) 27.64 0.51 [1.088 .020] Right-Angle Metalized Jacks PC Board/Panel Mount 12.83+0.13 -0.00 [.505+.005] -.000 Dia. 6.15 0.25 [.242 .010] 11.66 [.459] 10.97 0.18 [.432 .007] 5.64+0.08 -0.00 [.222+.003] -.000 1/2-28 Thread 4.34 [.171] Body Plating Tin Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout Dielectric Part No. TEFLON 6274425-2 Bulkhead Jack-Jack Adapter Right-Angle Adapter Plating Plating Body -- Nickel Center Contact --Gold Dielectric -- Polymethylpentene Body -- Nickel Center Contact --Gold Dielectric -- Polymethylpentene (Jack-Plug) 12.83+0.13 -0.00 [.505+.005] -.000 14.53 Dia. [.572] Max. Dia. 22.89 [.901] Max. 5.54+0.08 -0.00 [.218+.003] -.000 36.07 [1.420] 11/16 26.97 [1.062] Maximum Panel Thickness 6.35 [.250] Part No. 5222117-1 Recommended Panel Cutout Bulkhead Jack-Jack Adapter Part No. 5415020-1 Jack-Jack Adapter Plating Plating Body -- Nickel Center Contact -- Gold Dielectric -- Polymethylpentene Body -- Nickel Center Contact -- Gold Dielectric -- Polymethylpentene 36.04 Max. [1.419] 12.83+0.13 36.07 Max. [1.420] -0.00 [.505+.005] -.000 Dia. O 15.88 0.25 [.625 .010] 5.54+0.08 -0.00 Recommended Panel Cutout [.218+.003] -.000 Part No. 415567-1 Part No. 1274935-1 TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 76 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Bulkhead Jack-Push On Plug Adapter 0.13 O 9.65 +- 0.00 + .005 [.380 - .000 ] O 8.43 Max. [.332] 8.89 0.13 [.350 .005] O 14.35 Max. [.565] 41.92 [1.650] Recommended Panel Cutout Part No. 1274007-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 77 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208