1
This JWPS connector can be used for the
place of which especially waterproof is
required.
This is the wire-to-board connector that is
grade 7 ingress protection of JIS C 0920
(IPX7 of IEC 60529).
Specifications –––––––––––––––––––
• Current rating: 4 A AC, DC (AWG #22)
: 5 A AC, DC (AWG #20)
: 6 A AC, DC (AWG #18)
• Voltage rating: 300 V AC, DC
• Temperature range: -55˚C to +85˚C
(including temperature rise in applying
electrical current)
• Applicable wire: Conductor size/ AWG #22 to #18
Insulation O.D./ 1.75 to 2.5 mm
• Applicable PC board thickness: 1.6 mm
• Waterproof grade: Grade 7 ingress protection of JIS C 0920
(IPX7 of IEC 60529 )
(*Since the waterproof performance is not
available at the opposite side of mating
entrance, waterproof treatment is required,
if necessary.)
*Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
*Compliant with RoHS.
Standards–––––––––––––––––––––––
0Recognized E60389
Certified LR20812
Note: 1. The above figure is the figure viewed from the connector mounting side.
Note: 2. Hole dimensions differ according to the type of PC board and piercing method.
The dimensions above should serve as a guideline. Contact JST for details
• Waterproof performance
• Contained seal ring
• Solid rubber seal
• Double-spring construction
• Housing-to-terminal locks
• Mis-mating prevention key