Data Sheet 2.5Gb/s APD preamp Mini-DIL receiver ATM2400C This product is a high sensitivity optical receiver optimized for OC-48 optical transport systems. The high sensitivity performance given by the avalanche photodiode (APD) and preamp make the product ideal for maximizing unamplified transmission distances. The receiver supports FEC data rates up to 2.7Gb/s. The DC component cancellation function offered by the preamp allows the product to operate error free under high input power conditions. The receiver contains an APD, a low noise preamplifier, a precision thermistor and a single-mode connectorized fiber pigtail, all housed in an industry-standard Mini-DIL package. Features: * High sensitivity, -34dBm typical * Better than 0dBm overload * Industry-standard Mini-DIL package footprint * Differential data outputs * -40C to +85C maximum operating temperature range * RoHS 5/6 compliant Applications: * OC-48 Optical transport Systems * OC-48 DWDM Metro and Long Haul Systems * STM-16 SDH or OC-48 SONET Systems 1 Data Sheet Operating characteristics All parameters are measured with outputs 50 Ohm AC coupled, specified at a case temperature of 25C unless otherwise stated. Optical wavelength between 1525-1575nm. Data to 1610nm available on request. Parameter Symbol Measurement Conditions Min APD breakdown voltage Vbr Id=10A 50 APD temperature coefficient of breakdown voltage TVbr Differential Transimpedance gain ZT Bandwidth[1] Lower cut-off frequency[1] Max Unit 65 V 0.09 0.1 0.12 V/C Iph = 40A mean 2.8 3.5 4.5 k S21 -3dB from 100MHz 1.7 2.0 S21 -3dB from 100MHz 23-1 APD sensitivity over temperature PRBS, 2.5Gb/s, 2 extinction ratio = 15dB BER < 1x10-10 -5C to +70C case APD sensitivity 2.5Gb/s, 223-1 PRBS extinction ratio = 15dB BER < 1x10-10 25C case GHz 50 -32 kHz -33.5 dBm -34 dBm dBm APD overload over temperature Psat 2.5Gb/s, 223-1 PRBS, extinction ratio 15dB 1x10-10 BER, M=3 -5C to +70C case -3 +1 Output voltage swing at overload VOUT Peak-to-peak differential 220 280 Optical return loss ORL Power supply current ICC Power supply voltage VCC 3.0 Output return loss up to 1.8GHz S22 10 dB Output return loss up to 3.0GHz S22 5 dB Thermistor resistance RTH Note: [1] Pin = 30dBm, M = 10. 2 Typ 400 30 Beta constant = 3950 mV dB 28 45 mA 3.3 3.6 V 10 k Data Sheet Absolute Maximum Ratings Parameter Symbol Min Max Unit Operating case temperature Top -40 +85 C Storage temperature Tstg -40 +85 C +1 dBm Optical input power Power supply voltage -0.5 6.0 V APD supply voltage[1] 0 Vbr V Fiber bend radius 20 mm Lead soldering time at 260C 10 s Note: [1] APD bias requirements vary from device to device. APD breakdown voltage and bias data, relative to a thermistor resistance of 10k will be supplied with each device. Class 1 ESD precautions must be observed when handling these devices. Outline Drawing Gull-wing formed leads 3 Data Sheet Pin Out Pin # Symbol Description 1 VAPD APD supply voltage (+ve) 2 GND Case ground 3 OUT_P Data out +ve 4 GND Case ground 5 RTH Thermistor 6 OUT_N Data out -ve 7 GND Case ground 8 VCC Power supply (+ve) Schematic Diagram 4 Data Sheet RoHS Compliance Bookham is fully committed to environment protection and sustainable development and has set in place a comprehensive program for removing polluting and hazardous substances from all of its products. The relevant evidence of RoHS compliance is held as part of our controlled documentation for each of our compliant products. RoHS compliance parts are available to order, please refer to the ordering information section for further details. Ordering Information: ATM2400C - (Connector) J28 = SC/PC J57 = LC e.g. ATM2400C-J28 is a 3.3 volt 2.5Gb/s APD preamp Mini-DIL receiver with gull-wing-formed leads and an SC/PC connector. Other options available on request. Contact Information North America Bookham Worldwide Headquarters Europe Paignton Office Asia Shenzhen Office 2584 Junction Ave. San Jose CA 95134 USA Brixham Road Paignton Devon TQ4 7BE United Kingdom 2 Phoenix Road Futian Free Trade Zone Shenzhen 518038 China * Tel: +1 408 919 1500 * Tel: +44 (0) 1803 66 2000 * Fax: +1 408 919 6083 * Fax: +44 (0) 1803 66 2801 * Fax: +86 755 33305805 +86 755 33305807 www.bookham.com sales@bookham.com 5 ISO14001:1996 EMS 504193 TL9000 Rev 3.0 (ISO9001:2000) FM15040 * Tel: +86 755 33305888 Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by Bookham before they become applicable to any particular order or contract. In accordance with the Bookham policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of Bookham or others. Further details are available from any Bookham sales representative. BH12849 Rev 1.0 January 2007. (c)Bookham 2006. Bookham is a registered trademark of Bookham Inc.