150D www.vishay.com Vishay Sprague Solid-Electrolyte TANTALEXTM Capacitors, Hermetically-Sealed, Axial-Lead FEATURES * Terminations: tin / lead (SnPb), 100 % tin (RoHS-compliant) Available * These high performance, hermetically-sealed TANTALEX capacitors have set the standard for solid-electrolyte tantalum capacitors for more than three decades Available * High capacitance, low DCL, low dissipation factor and exceptional operating stability PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +125 C (above 85 C, voltage derating is required) Capacitance Tolerance: at 120 Hz, +25 C 20 %, 10 % standard. 5 % available as special Dissipation Factor: at 120 Hz, +25 C DC Leakage Current (DCL Max.): at +25 C: leakage current shall not exceed the values listed in the Standard Ratings table at +85 C: leakage current shall not exceed 10 times the values listed in the Standard Ratings table at +125 C: leakage shall not exceed 15 times the values listed in the Standard Ratings table Life Test: capacitors shall withstand rated DC voltage applied at +85 C for 2000 h or derated DC voltage applied at +125 C for 1000 h Following the life test: 1. DCL shall not exceed 125 % of the initial requirement 2. Dissipation factor shall meet the initial requirement 3. Change in capacitance shall not exceed 5 % * Performance and reliability have been proven commercial, industrial and military applications in * Available in four case codes and capacitors and are supplied with plastic-film insulation * Terminals are solid, tinned nickel wire leads * The military equivalent of the 150D is the M39003/01 (style CSR13) which is qualified to MIL-PRF-39003/1 * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details ORDERING INFORMATION 150D 224 X0 006 A 2 T E3 MODEL CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT 85 C CASE CODE STYLE NUMBER PACKAGING RoHSCOMPLIANT This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = 20 % X9 = 10 % X5 = 5 % * * Special order This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. See Ratings and Case Codes table 0 = no sleeve 2 = insulated sleeve B = bulk T = tape and reel G = ammo pack E3 = 100 % tin termination (RoHS-compliant) Blank = SnPb termination Revision: 16-Nov-17 Document Number: 40015 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150D www.vishay.com Vishay Sprague DIMENSIONS in inches [millimeters] 1.500 0.250 [38.10 6.35] 1.500 0.250 [38.10 6.35] L1 Positive lead D dia. + - Solid tinned nickel leads CASE CODE 0.047 [1.19] max. 0.125 [3.18] max. J max. D L1 WITH INSULATING SLEEVE (1) J (MAXIMUM) LEAD SIZE AWG NO. NOMINAL DIAMETER A 0.135 0.016 [3.43 0.41] 0.286 0.031 [7.26 0.79] 0.422 [10.720] 24 0.020 [0.51] B 0.185 0.016 [4.70 0.41] 0.474 0.031 [12.04 0.79] 0.610 [15.490] 24 0.020 [0.51] R 0.289 0.016 [7.34 0.41] 0.686 0.031 [17.42 0.79] 0.822 [20.880] 22 0.025 [0.64] S 0.351 0.016 [8.92 0.41] 0.786 0.031 [19.96 0.79] 0.922 [23.420] 22 0.025 [0.64] Note (1) When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body STANDARD RATINGS CAPACITANCE (F) CASE CODE PART NUMBER MAX. DCL AT +25 C (A) MAX. DF AT +25 C 120 Hz (%) 6 VDC AT +85 C, SURGE = 8 V; 4 VDC AT +125 C, SURGE = 5 V 0.22 A 150D224(1)006A(2)(3)(4) 0.5 2 0.27 A 150D274(1)006A(2)(3)(4) 0.5 2 0.33 A 150D334(1)006A(2)(3)(4) 0.5 2 0.39 A 150D394(1)006A(2)(3)(4) 0.5 2 0.47 A 150D474(1)006A(2)(3)(4) 0.5 2 0.56 A 150D564(1)006A(2)(3)(4) 0.5 2 0.68 A 150D684(1)006A(2)(3)(4) 0.5 2 0.82 A 150D824(1)006A(2)(3)(4) 0.5 2 1.0 A 150D105(1)006A(2)(3)(4) 0.5 2 1.2 A 150D125(1)006A(2)(3)(4) 0.5 4 1.5 A 150D155(1)006A(2)(3)(4) 0.5 4 1.8 A 150D185(1)006A(2)(3)(4) 0.5 4 2.2 A 150D225(1)006A(2)(3)(4) 0.5 4 2.7 A 150D275(1)006A(2)(3)(4) 0.5 4 3.3 A 150D335(1)006A(2)(3)(4) 0.5 4 3.9 A 150D395(1)006A(2)(3)(4) 0.5 4 4.7 A 150D475(1)006A(2)(3)(4) 0.5 4 5.6 A 150D565(1)006A(2)(3)(4) 0.5 4 6.8 A 150D685(1)006A(2)(3)(4) 0.5 6 8.2 B 150D825(1)006B(2)(3)(4) 0.5 6 10 B 150D106(1)006B(2)(3)(4) 0.5 6 12 B 150D126(1)006B(2)(3)(4) 0.5 6 15 B 150D156(1)006B(2)(3)(4) 1.0 6 18 B 150D186(1)006B(2)(3)(4) 1.0 6 Note * Part number definitions: (1) For 10 % tolerance specify "X9"; for 20 % specify "X0"; for 5 % "X5" (special order) (2) Style number: 0 = no sleeve, 2 = insulated sleeve (3) Packaging options: B = bulk, T = tape and reel, G = ammo pack (4) Termination: E3 = 100 % tin, blank = SnPb Revision: 16-Nov-17 Document Number: 40015 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (F) CASE CODE PART NUMBER MAX. DCL AT +25 C (A) MAX. DF AT +25 C 120 Hz (%) 6 VDC AT +85 C, SURGE = 8 V; 4 VDC AT +125 C, SURGE = 5 V 22 B 150D226(1)006B(2)(3)(4) 1.0 6 27 B 150D276(1)006B(2)(3)(4) 1.0 6 33 B 150D336(1)006B(2)(3)(4) 1.0 6 39 B 150D396(1)006B(2)(3)(4) 1.0 6 47 B 150D476(1)006B(2)(3)(4) 2.0 6 56 B 150D566(1)006B(2)(3)(4) 2.0 6 68 R 150D686(1)006R(2)(3)(4) 3.0 6 82 R 150D826(1)006R(2)(3)(4) 3.0 6 100 R 150D107(1)006R(2)(3)(4) 3.0 6 120 R 150D127(1)006R(2)(3)(4) 3.0 6 150 R 150D157(1)006R(2)(3)(4) 6.0 6 180 R 150D187(1)006R(2)(3)(4) 6.0 6 220 S 150D227(1)006S(2)(3)(4) 6.0 8 270 S 150D277(1)006S(2)(3)(4) 6.0 8 S 150D337(1)006S(2)(3)(4) 10.0 8 330 10 VDC AT +85 C, SURGE = 13 V; 7 VDC AT +125 C, SURGE = 9 V 0.22 A 150D224(1)010A(2)(3)(4) 0.5 2 0.27 A 150D274(1)010A(2)(3)(4) 0.5 2 0.33 A 150D334(1)010A(2)(3)(4) 0.5 2 0.39 A 150D394(1)010A(2)(3)(4) 0.5 2 0.47 A 150D474(1)010A(2)(3)(4) 0.5 2 0.56 A 150D564(1)010A(2)(3)(4) 0.5 2 0.68 A 150D684(1)010A(2)(3)(4) 0.5 2 0.82 A 150D824(1)010A(2)(3)(4) 0.5 2 1.0 A 150D105(1)010A(2)(3)(4) 0.5 2 1.2 A 150D125(1)010A(2)(3)(4) 0.5 4 1.5 A 150D155(1)010A(2)(3)(4) 0.5 4 1.8 A 150D185(1)010A(2)(3)(4) 0.5 4 2.2 A 150D225(1)010A(2)(3)(4) 0.5 4 2.7 A 150D275(1)010A(2)(3)(4) 0.5 4 3.3 A 150D335(1)010A(2)(3)(4) 0.5 4 3.9 A 150D395(1)010A(2)(3)(4) 0.5 4 4.7 A 150D475(1)010A(2)(3)(4) 0.5 4 5.6 B 150D565(1)010B(2)(3)(4) 0.5 4 6.8 B 150D685(1)010B(2)(3)(4) 1.0 6 8.2 B 150D825(1)010B(2)(3)(4) 1.0 6 10 B 150D106(1)010B(2)(3)(4) 1.0 6 12 B 150D126(1)010B(2)(3)(4) 1.0 6 15 B 150D156(1)010B(2)(3)(4) 1.0 6 18 B 150D186(1)010B(2)(3)(4) 1.0 6 22 B 150D226(1)010B(2)(3)(4) 2.0 6 27 B 150D276(1)010B(2)(3)(4) 2.0 6 Note * Part number definitions: (1) For 10 % tolerance specify "X9"; for 20 % specify "X0"; for 5 % "X5" (special order) (2) Style number: 0 = no sleeve, 2 = insulated sleeve (3) Packaging options: B = bulk, T = tape and reel, G = ammo pack (4) Termination: E3 = 100 % tin, blank = SnPb Revision: 16-Nov-17 Document Number: 40015 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (F) CASE CODE PART NUMBER MAX. DCL AT +25 C (A) MAX. DF AT +25 C 120 Hz (%) 10 VDC AT +85 C, SURGE = 13 V; 7 VDC AT +125 C, SURGE = 9 V 33 B 150D336(1)010B(2)(3)(4) 2.0 6 39 B 150D396(1)010B(2)(3)(4) 2.0 6 47 R 150D476(1)010R(2)(3)(4) 3.0 6 56 R 150D566(1)010R(2)(3)(4) 3.0 6 68 R 150D686(1)010R(2)(3)(4) 3.0 6 82 R 150D826(1)010R(2)(3)(4) 3.0 6 100 R 150D107(1)010R(2)(3)(4) 6.0 6 120 R 150D127(1)010R(2)(3)(4) 6.0 6 150 S 150D157(1)010S(2)(3)(4) 10.0 6 180 S 150D187(1)010S(2)(3)(4) 10.0 6 220 S 150D227(1)010S(2)(3)(4) 10.0 8 15 VDC AT +85 C, SURGE = 20 V; 10 VDC AT +125 C, SURGE = 12 V 0.22 A 150D224(1)015A(2)(3)(4) 0.5 2 0.27 A 150D274(1)015A(2)(3)(4) 0.5 2 0.33 A 150D334(1)015A(2)(3)(4) 0.5 2 0.39 A 150D394(1)015A(2)(3)(4) 0.5 2 0.47 A 150D474(1)015A(2)(3)(4) 0.5 2 0.56 A 150D564(1)015A(2)(3)(4) 0.5 2 0.68 A 150D684(1)015A(2)(3)(4) 0.5 2 0.82 A 150D824(1)015A(2)(3)(4) 0.5 2 1.0 A 150D105(1)015A(2)(3)(4) 0.5 2 1.2 A 150D125(1)015A(2)(3)(4) 0.5 4 1.5 A 150D155(1)015A(2)(3)(4) 0.5 4 1.8 A 150D185(1)015A(2)(3)(4) 0.5 4 2.2 A 150D225(1)015A(2)(3)(4) 0.5 4 2.7 A 150D275(1)015A(2)(3)(4) 0.5 4 3.3 A 150D335(1)015A(2)(3)(4) 0.5 4 3.9 B 150D395(1)015B(2)(3)(4) 0.5 4 4.7 B 150D475(1)015B(2)(3)(4) 1.0 4 5.6 B 150D565(1)015B(2)(3)(4) 1.0 4 6.8 B 150D685(1)015B(2)(3)(4) 1.0 6 8.2 B 150D825(1)015B(2)(3)(4) 1.0 6 10 B 150D106(1)015B(2)(3)(4) 1.0 6 12 B 150D126(1)015B(2)(3)(4) 1.0 6 15 B 150D156(1)015B(2)(3)(4) 2.0 6 18 B 150D186(1)015B(2)(3)(4) 2.0 6 22 B 150D226(1)015B(2)(3)(4) 3.0 6 27 R 150D276(1)015R(2)(3)(4) 3.0 6 33 R 150D336(1)015R(2)(3)(4) 3.0 6 39 R 150D396(1)015R(2)(3)(4) 3.0 6 47 R 150D476(1)015R(2)(3)(4) 6.0 6 56 R 150D566(1)015R(2)(3)(4) 6.0 6 Note * Part number definitions: (1) For 10 % tolerance specify "X9"; for 20 % specify "X0"; for 5 % "X5" (special order) (2) Style number: 0 = no sleeve, 2 = insulated sleeve (3) Packaging options: B = bulk, T = tape and reel, G = ammo pack (4) Termination: E3 = 100 % tin, blank = SnPb Revision: 16-Nov-17 Document Number: 40015 4 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (F) CASE CODE PART NUMBER MAX. DCL AT +25 C (A) MAX. DF AT +25 C 120 Hz (%) 15 VDC AT +85 C, SURGE = 20 V; 10 VDC AT +125 C, SURGE = 12 V 68 R 150D686(1)015R(2)(3)(4) 6.0 82 S 150D826(1)015S(2)(3)(4) 6.0 6 6 100 S 150D107(1)015S(2)(3)(4) 6.0 6 120 S 150D127(1)015S(2)(3)(4) 6.0 6 150 S 150D157(1)015S(2)(3)(4) 10.0 6 20 VDC AT +85 C, SURGE = 26 V; 13 VDC AT +125 C, SURGE = 16 V 0.033 A 150D333(1)020A(2)(3)(4) 0.1 2 0.039 A 150D393(1)020A(2)(3)(4) 0.1 2 0.047 A 150D473(1)020A(2)(3)(4) 0.1 2 0.056 A 150D563(1)020A(2)(3)(4) 0.1 2 0.068 A 150D683(1)020A(2)(3)(4) 0.1 2 0.082 A 150D823(1)020A(2)(3)(4) 0.1 2 0.10 A 150D104(1)020A(2)(3)(4) 0.5 2 0.12 A 150D124(1)020A(2)(3)(4) 0.5 2 0.15 A 150D154(1)020A(2)(3)(4) 0.5 2 0.18 A 150D184(1)020A(2)(3)(4) 0.5 2 0.22 A 150D224(1)020A(2)(3)(4) 0.5 2 0.27 A 150D274(1)020A(2)(3)(4) 0.5 2 0.33 A 150D334(1)020A(2)(3)(4) 0.5 2 0.39 A 150D394(1)020A(2)(3)(4) 0.5 2 0.47 A 150D474(1)020A(2)(3)(4) 0.5 2 0.56 A 150D564(1)020A(2)(3)(4) 0.5 2 0.68 A 150D684(1)020A(2)(3)(4) 0.5 2 0.82 A 150D824(1)020A(2)(3)(4) 0.5 2 1.0 A 150D105(1)020A(2)(3)(4) 0.5 2 1.2 A 150D125(1)020A(2)(3)(4) 0.5 4 1.5 A 150D155(1)020A(2)(3)(4) 0.5 4 1.8 A 150D185(1)020A(2)(3)(4) 0.5 4 2.2 A 150D225(1)020A(2)(3)(4) 0.5 4 2.7 B 150D275(1)020B(2)(3)(4) 0.5 4 3.3 B 150D335(1)020B(2)(3)(4) 0.5 4 3.9 B 150D395(1)020B(2)(3)(4) 1.0 4 4.7 B 150D475(1)020B(2)(3)(4) 1.0 4 5.6 B 150D565(1)020B(2)(3)(4) 1.0 4 6.8 B 150D685(1)020B(2)(3)(4) 1.0 6 8.2 B 150D825(1)020B(2)(3)(4) 1.0 6 10 B 150D106(1)020B(2)(3)(4) 1.0 6 12 B 150D126(1)020B(2)(3)(4) 1.0 6 15 B 150D156(1)020B(2)(3)(4) 2.0 6 18 R 150D186(1)020R(2)(3)(4) 3.0 6 22 R 150D226(1)020R(2)(3)(4) 3.0 6 27 R 150D276(1)020R(2)(3)(4) 3.0 6 Note * Part number definitions: (1) For 10 % tolerance specify "X9"; for 20 % specify "X0"; for 5 % "X5" (special order) (2) Style number: 0 = no sleeve, 2 = insulated sleeve (3) Packaging options: B = bulk, T = tape and reel, G = ammo pack (4) Termination: E3 = 100 % tin, blank = SnPb Revision: 16-Nov-17 Document Number: 40015 5 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (F) CASE CODE PART NUMBER MAX. DCL AT +25 C (A) MAX. DF AT +25 C 120 Hz (%) 20 VDC AT +85 C, SURGE = 26 V; 13 VDC AT +125 C, SURGE = 16 V 33 R 150D336(1)020R(2)(3)(4) 3.0 6 39 R 150D396(1)020R(2)(3)(4) 3.0 6 47 R 150D476(1)020R(2)(3)(4) 6.0 6 56 S 150D566(1)020S(2)(3)(4) 6.0 6 68 S 150D686(1)020S(2)(3)(4) 6.0 6 82 S 150D826(1)020S(2)(3)(4) 6.0 6 S 150D107(1)020S(2)(3)(4) 10.0 6 100 25 VDC AT +85 C, SURGE = 32 V; 17 VDC AT +125 C, SURGE = 21 V 1.2 A 150D125(1)025A(2)(3)(4) 0.5 4 1.5 A 150D155(1)025A(2)(3)(4) 0.5 4 1.8 A 150D185(1)025A(2)(3)(4) 0.5 4 4.7 B 150D475(1)025B(2)(3)(4) 1.2 4 5.6 B 150D565(1)025B(2)(3)(4) 1.4 4 6.8 B 150D685(1)025B(2)(3)(4) 1.7 4 8.2 B 150D825(1)025B(2)(3)(4) 2.1 4 10 B 150D106(1)025B(2)(3)(4) 2.5 6 15 B 150D156(1)025B(2)(3)(4) 3.8 6 33 R 150D336(1)025R(2)(3)(4) 8.3 6 68 S 150D686(1)025S(2)(3)(4) 17 6 100 S 150D107(1)025S(2)(3)(4) 25 6 35 VDC AT +85 C, SURGE = 46 V; 23 VDC AT +125 C, SURGE = 28 V 0.033 A 150D333(1)035A(2)(3)(4) 0.1 2 0.039 A 150D393(1)035A(2)(3)(4) 0.1 2 0.047 A 150D473(1)035A(2)(3)(4) 0.1 2 0.056 A 150D563(1)035A(2)(3)(4) 0.1 2 0.068 A 150D683(1)035A(2)(3)(4) 0.1 2 0.082 A 150D823(1)035A(2)(3)(4) 0.1 2 0.10 A 150D104(1)035A(2)(3)(4) 0.5 2 0.12 A 150D124(1)035A(2)(3)(4) 0.5 2 0.15 A 150D154(1)035A(2)(3)(4) 0.5 2 0.18 A 150D184(1)035A(2)(3)(4) 0.5 2 0.22 A 150D224(1)035A(2)(3)(4) 0.5 2 0.27 A 150D274(1)035A(2)(3)(4) 0.5 2 0.33 A 150D334(1)035A(2)(3)(4) 0.5 2 0.39 A 150D394(1)035A(2)(3)(4) 0.5 2 0.47 A 150D474(1)035A(2)(3)(4) 0.5 2 0.56 A 150D564(1)035A(2)(3)(4) 0.5 2 0.68 A 150D684(1)035A(2)(3)(4) 0.5 2 0.82 A 150D824(1)035A(2)(3)(4) 0.5 2 1.0 A 150D105(1)035A(2)(3)(4) 0.5 2 1.2 B 150D125(1)035B(2)(3)(4) 0.5 4 1.5 B 150D155(1)035B(2)(3)(4) 0.5 4 Note * Part number definitions: (1) For 10 % tolerance specify "X9"; for 20 % specify "X0"; for 5 % "X5" (special order) (2) Style number: 0 = no sleeve, 2 = insulated sleeve (3) Packaging options: B = bulk, T = tape and reel, G = ammo pack (4) Termination: E3 = 100 % tin, blank = SnPb Revision: 16-Nov-17 Document Number: 40015 6 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (F) CASE CODE PART NUMBER MAX. DCL AT +25 C (A) MAX. DF AT +25 C 120 Hz (%) 35 VDC AT +85 C, SURGE = 46 V; 23 VDC AT +125 C, SURGE = 28 V 1.8 B 150D185(1)035B(2)(3)(4) 0.5 4 2.2 B 150D225(1)035B(2)(3)(4) 1.0 4 2.7 B 150D275(1)035B(2)(3)(4) 1.0 4 3.3 B 150D335(1)035B(2)(3)(4) 1.0 4 3.9 B 150D395(1)035B(2)(3)(4) 1.0 4 4.7 B 150D475(1)035B(2)(3)(4) 1.0 4 5.6 B 150D565(1)035B(2)(3)(4) 1.0 4 6.8 B 150D685(1)035B(2)(3)(4) 2.0 4 8.2 R 150D825(1)035R(2)(3)(4) 3.0 4 10 R 150D106(1)035R(2)(3)(4) 3.0 4 12 R 150D126(1)035R(2)(3)(4) 3.0 4 15 R 150D156(1)035R(2)(3)(4) 3.0 4 18 R 150D186(1)035R(2)(3)(4) 3.0 4 22 R 150D226(1)035R(2)(3)(4) 6.0 4 27 S 150D276(1)035S(2)(3)(4) 6.0 4 33 S 150D336(1)035S(2)(3)(4) 6.0 4 39 S 150D396(1)035S(2)(3)(4) 6.0 4 47 S 150D476(1)035S(2)(3)(4) 10.0 4 50 VDC AT +85 C, SURGE = 65 V; 33 VDC AT +125 C, SURGE = 40 V 0.056 A 150D563(1)050A(2)(3)(4) 0.1 2 0.068 A 150D683(1)050A(2)(3)(4) 0.1 2 0.082 A 150D823(1)050A(2)(3)(4) 0.1 2 0.10 A 150D104(1)050A(2)(3)(4) 0.5 2 0.12 A 150D124(1)050A(2)(3)(4) 0.5 2 0.15 A 150D154(1)050A(2)(3)(4) 0.5 2 0.18 A 150D184(1)050A(2)(3)(4) 0.5 2 0.22 A 150D224(1)050A(2)(3)(4) 0.5 2 0.27 A 150D274(1)050A(2)(3)(4) 0.5 2 0.33 A 150D334(1)050A(2)(3)(4) 0.5 2 0.39 A 150D394(1)050A(2)(3)(4) 0.5 2 0.47 A 150D474(1)050A(2)(3)(4) 0.5 2 0.56 A 150D564(1)050A(2)(3)(4) 0.5 2 0.68 A 150D684(1)050A(2)(3)(4) 0.5 2 0.82 A 150D824(1)050A(2)(3)(4) 0.5 2 1.0 A 150D105(1)050A(2)(3)(4) 0.5 2 1.2 B 150D125(1)050B(2)(3)(4) 0.5 4 1.5 B 150D155(1)050B(2)(3)(4) 0.5 4 1.8 B 150D185(1)050B(2)(3)(4) 0.5 4 2.2 B 150D225(1)050B(2)(3)(4) 1.0 4 2.7 B 150D275(1)050B(2)(3)(4) 1.0 4 3.3 B 150D335(1)050B(2)(3)(4) 2.0 4 3.9 B 150D395(1)050B(2)(3)(4) 2.0 4 Note * Part number definitions: (1) For 10 % tolerance specify "X9"; for 20 % specify "X0"; for 5 % "X5" (special order) (2) Style number: 0 = no sleeve, 2 = insulated sleeve (3) Packaging options: B = bulk, T = tape and reel, G = ammo pack (4) Termination: E3 = 100 % tin, blank = SnPb Revision: 16-Nov-17 Document Number: 40015 7 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (F) CASE CODE PART NUMBER MAX. DCL AT +25 C (A) MAX. DF AT +25 C 120 Hz (%) 50 VDC AT +85 C, SURGE = 65 V; 33 VDC AT +125 C, SURGE = 40 V 4.7 B 150D475(1)050B(2)(3)(4) 3.0 4 5.6 R 150D565(1)050R(2)(3)(4) 3.0 4 6.8 R 150D685(1)050R(2)(3)(4) 3.0 4 8.2 R 150D825(1)050R(2)(3)(4) 3.0 4 10 R 150D106(1)050R(2)(3)(4) 3.0 4 12 R 150D126(1)050R(2)(3)(4) 3.0 4 15 R 150D156(1)050R(2)(3)(4) 6.0 4 18 R 150D186(1)050R(2)(3)(4) 6.0 4 22 S 150D226(1)050S(2)(3)(4) 6.0 4 60 VDC AT +85 C, SURGE = 78 V; 40 VDC AT +125 C, SURGE = 49 V 0.10 A 150D104(1)060A(2)(3)(4) 0.5 4.0 0.12 A 150D124(1)060A(2)(3)(4) 0.5 4.0 0.15 A 150D154(1)060A(2)(3)(4) 0.5 4.0 0.18 A 150D184(1)060A(2)(3)(4) 0.5 4.0 0.22 A 150D224(1)060A(2)(3)(4) 0.5 4.0 0.27 A 150D274(1)060A(2)(3)(4) 0.5 4.0 0.33 A 150D334(1)060A(2)(3)(4) 0.5 4.0 0.39 A 150D394(1)060A(2)(3)(4) 0.5 4.0 0.47 A 150D474(1)060A(2)(3)(4) 0.5 4.0 0.56 A 150D564(1)060A(2)(3)(4) 0.5 4.0 0.68 A 150D684(1)060A(2)(3)(4) 0.5 4.0 1.0 B 150D105(1)060B(2)(3)(4) 0.5 4.0 2.2 B 150D225(1)060B(2)(3)(4) 1.0 4.0 4.7 R 150D475(1)060R(2)(3)(4) 3.0 6.0 5.6 R 150D565(1)060R(2)(3)(4) 3.0 6.0 6.8 R 150D685(1)060R(2)(3)(4) 4.0 6.0 8.2 R 150D825(1)060R(2)(3)(4) 5.0 6.0 10 R 150D106(1)060R(2)(3)(4) 6.0 6.0 12 S 150D126(1)060S(2)(3)(4) 6.0 6.0 15 S 150D156(1)060S(2)(3)(4) 9.0 6.0 18 S 150D186(1)060S(2)(3)(4) 10.0 6.0 22 S 150D226(1)060S(2)(3)(4) 12.0 6.0 75 VDC AT +85 C, SURGE = 98 V; 50 VDC AT +125 C, SURGE = 64 V 0.033 A 150D333(1)075A(2)(3)(4) 0.5 2 0.039 A 150D393(1)075A(2)(3)(4) 0.5 2 0.047 A 150D473(1)075A(2)(3)(4) 0.5 2 0.056 A 150D563(1)075A(2)(3)(4) 0.5 2 0.068 A 150D683(1)075A(2)(3)(4) 0.5 2 0.082 A 150D823(1)075A(2)(3)(4) 0.5 2 0.10 A 150D104(1)075A(2)(3)(4) 0.5 2 0.12 A 150D124(1)075A(2)(3)(4) 0.5 2 0.15 A 150D154(1)075A(2)(3)(4) 0.5 2 Note * Part number definitions: (1) For 10 % tolerance specify "X9"; for 20 % specify "X0"; for 5 % "X5" (special order) (2) Style number: 0 = no sleeve, 2 = insulated sleeve (3) Packaging options: B = bulk, T = tape and reel, G = ammo pack (4) Termination: E3 = 100 % tin, blank = SnPb Revision: 16-Nov-17 Document Number: 40015 8 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (F) CASE CODE PART NUMBER MAX. DCL AT +25 C (A) MAX. DF AT +25 C 120 Hz (%) 75 VDC AT +85 C, SURGE = 98 V; 50 VDC AT +125 C, SURGE = 64 V 0.18 A 150D184(1)075A(2)(3)(4) 0.5 2 0.22 A 150D224(1)075A(2)(3)(4) 0.5 2 0.27 A 150D274(1)075A(2)(3)(4) 0.5 2 0.33 A 150D334(1)075A(2)(3)(4) 0.5 2 0.39 A 150D394(1)075A(2)(3)(4) 0.5 2 0.47 A 150D474(1)075A(2)(3)(4) 0.5 2 0.56 A 150D564(1)075A(2)(3)(4) 0.5 2 0.68 A 150D684(1)075A(2)(3)(4) 0.5 2 0.82 B 150D824(1)075B(2)(3)(4) 0.5 2 1.0 B 150D105(1)075B(2)(3)(4) 0.5 2 1.2 B 150D125(1)075B(2)(3)(4) 0.5 4 1.5 B 150D155(1)075B(2)(3)(4) 1.0 4 1.8 B 150D185(1)075B(2)(3)(4) 1.0 4 2.2 B 150D225(1)075B(2)(3)(4) 1.0 4 2.7 B 150D275(1)075B(2)(3)(4) 1.0 4 3.3 B 150D335(1)075B(2)(3)(4) 2.0 4 3.9 B 150D395(1)075B(2)(3)(4) 2.0 4 4.7 R 150D475(1)075R(2)(3)(4) 4.0 4 5.6 R 150D565(1)075R(2)(3)(4) 4.0 4 6.8 R 150D685(1)075R(2)(3)(4) 6.0 4 8.2 R 150D825(1)075R(2)(3)(4) 6.0 4 10 R 150D106(1)075R(2)(3)(4) 8.0 4 12 S 150D126(1)075S(2)(3)(4) 10.0 4 15 S 150D156(1)075S(2)(3)(4) 12.0 4 100 VDC AT +85 C, SURGE = 130 V; 67 VDC AT +125 C, SURGE = 86 V 0.033 A 150D333(1)100A(2)(3)(4) 0.5 2 0.039 A 150D393(1)100A(2)(3)(4) 0.5 2 0.047 A 150D473(1)100A(2)(3)(4) 0.5 2 0.056 A 150D563(1)100A(2)(3)(4) 0.5 2 0.068 A 150D683(1)100A(2)(3)(4) 0.5 2 0.082 A 150D823(1)100A(2)(3)(4) 0.5 2 0.10 A 150D104(1)100A(2)(3)(4) 0.5 2 0.12 A 150D124(1)100A(2)(3)(4) 0.5 2 0.15 A 150D154(1)100A(2)(3)(4) 0.5 2 0.18 A 150D184(1)100A(2)(3)(4) 0.5 2 0.22 A 150D224(1)100A(2)(3)(4) 0.5 2 0.27 A 150D274(1)100A(2)(3)(4) 0.5 2 0.33 A 150D334(1)100A(2)(3)(4) 0.5 2 0.39 A 150D394(1)100A(2)(3)(4) 0.5 2 0.47 A 150D474(1)100A(2)(3)(4) 0.5 2 0.56 A 150D564(1)100A(2)(3)(4) 0.5 2 0.68 B 150D684(1)100B(2)(3)(4) 0.5 2 Note * Part number definitions: (1) For 10 % tolerance specify "X9"; for 20 % specify "X0"; for 5 % "X5" (special order) (2) Style number: 0 = no sleeve, 2 = insulated sleeve (3) Packaging options: B = bulk, T = tape and reel, G = ammo pack (4) Termination: E3 = 100 % tin, blank = SnPb Revision: 16-Nov-17 Document Number: 40015 9 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (F) CASE CODE PART NUMBER MAX. DCL AT +25 C (A) MAX. DF AT +25 C 120 Hz (%) 100 VDC AT +85 C, SURGE = 130 V; 67 VDC AT +125 C, SURGE = 86 V 0.82 B 150D824(1)100B(2)(3)(4) 0.5 2 1.0 B 150D105(1)100B(2)(3)(4) 0.5 2 1.2 B 150D125(1)100B(2)(3)(4) 0.5 3 1.5 B 150D155(1)100B(2)(3)(4) 0.6 3 1.8 B 150D185(1)100B(2)(3)(4) 0.6 3 2.2 B 150D225(1)100B(2)(3)(4) 0.6 3 2.7 B 150D275(1)100B(2)(3)(4) 0.6 3 3.3 R 150D335(1)100R(2)(3)(4) 2.5 3 3.9 R 150D395(1)100R(2)(3)(4) 3.0 3 4.7 R 150D475(1)100R(2)(3)(4) 4.0 3 5.6 R 150D565(1)100R(2)(3)(4) 4.0 3 6.8 R 150D685(1)100R(2)(3)(4) 6.0 3 8.2 S 150D825(1)100S(2)(3)(4) 6.0 3 10 S 150D106(1)100S(2)(3)(4) 6.0 3 125 VDC AT +85 C, SURGE = 140 V; 82 VDC AT +125 C, SURGE = 94 V 0.027 A 150D273(1)125A(2)(3)(4) 1.0 2 0.033 A 150D333(1)125A(2)(3)(4) 1.0 2 0.039 A 150D393(1)125A(2)(3)(4) 1.0 2 0.047 A 150D473(1)125A(2)(3)(4) 1.0 2 0.056 A 150D563(1)125A(2)(3)(4) 1.0 2 0.068 A 150D683(1)125A(2)(3)(4) 1.0 2 0.082 A 150D823(1)125A(2)(3)(4) 1.0 2 0.10 A 150D104(1)125A(2)(3)(4) 1.0 2 0.12 A 150D124(1)125A(2)(3)(4) 1.0 2 0.15 A 150D154(1)125A(2)(3)(4) 1.0 2 0.18 A 150D184(1)125A(2)(3)(4) 1.0 2 0.22 A 150D224(1)125A(2)(3)(4) 1.0 2 0.27 A 150D274(1)125A(2)(3)(4) 1.0 2 0.33 A 150D334(1)125A(2)(3)(4) 1.0 2 0.39 A 150D394(1)125A(2)(3)(4) 1.5 2 0.47 A 150D474(1)125A(2)(3)(4) 1.5 2 0.56 B 150D564(1)125B(2)(3)(4) 1.6 2 0.68 B 150D684(1)125B(2)(3)(4) 1.8 2 0.82 B 150D824(1)125B(2)(3)(4) 2.0 2 1.0 B 150D105(1)125B(2)(3)(4) 2.0 2 1.2 B 150D125(1)125B(2)(3)(4) 2.0 3 1.5 B 150D155(1)125B(2)(3)(4) 2.0 3 1.8 B 150D185(1)125B(2)(3)(4) 2.0 3 2.2 B 150D225(1)125B(2)(3)(4) 2.0 3 Note * Part number definitions: (1) For 10 % tolerance specify "X9"; for 20 % specify "X0"; for 5 % "X5" (special order) (2) Style number: 0 = no sleeve, 2 = insulated sleeve (3) Packaging options: B = bulk, T = tape and reel, G = ammo pack (4) Termination: E3 = 100 % tin, blank = SnPb Revision: 16-Nov-17 Document Number: 40015 10 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150D www.vishay.com Vishay Sprague TAPE AND REEL PACKAGING in inches [millimeters] Meets EIA standard RS-296 "A" Tape spacing 13.0 [330.2] Standard reel B 1.126 to 3.07 [28.6 to 78.0] A I. D. reel hub Component spacing 1.374 to 3.626 [34.9 to 92.1] 0.031 [0.79] max. Off center (1. a) 0.625 0.0062 dia. [15.88 1.575] Thru hole 0.125 [3.18] max. 0.250 [6.35] (3. b) Label (4. a) 0.750 [19.05] "A" Section "A" - "A" 0.031 [0.79] (3. f) Both sides (3. f) STANDARD PACKAGING QUANTITY AND DIMENSIONS in inches [millimeters] CASE CODE COMPONENT SPACING A A B R S 0.200 0.015 [5.08 0.38] 0.200 0.015 [5.08 0.38] 0.400 0.015 [10.16 0.38] 0.400 0.015 [10.16 0.38] TAPE AND REEL TAPE SPACING UNITS PER REEL B 2.500 0.062 1000 [63.5 1.57] 2.500 0.062 1000 [63.5 1.57] 2.875 0.062 500 [73.03 1.57] 2.875 0.062 500 [73.03 1.57] AMMO PACK TAPE SPACING UNITS PER BOX B 2.063 0.073 500 [53 2] 2.063 0.073 500 [53 2] 2.063 0.073 250 [53 2] 2.063 0.073 250 [53 2] STANDARD REEL PACKAGING INFORMATION 1. Component Leads a. Component leads shall not be bent beyond 0.047" [1.19 mm] maximum from their nominal position when measured from the leading edge of the component lead at the inside tape edge and at the lead egress from the component. b. The "C" dimension shall be governed by the overall length of the reel packaged component. The distance between flanges shall be 0.125" to 0.250" [3.18 mm to 6.35 mm] greater than the overall component length. 2. Orientation All polarized components must be oriented to one direction. The cathode lead tape shall be a color and the anode lead tape shall be white. 3. Reeling a. Components on any reel shall not represent more than two date codes when date code identification is required. b. Component leads shall be positioned between pairs of 0.250" [6.35 mm] tape. c. The disposable reels have hubs and corrugated fibreboard flanges and core or equivalent. d. A minimum of 12.0" [304.8 mm] leader of tape shall be provided before the first and after the last component on the reel. e. 50 lb or 60 lb. Kraft paper must be wound between layer of components as far as necessary for component protection. Width of paper to be 0.062" to 0.250" [1.57 mm to 6.35 mm] less than the "C" dimension of the reel. Solid-electrolyte TANTALEX capacitors hermetically-sealed, axial-lead. Revision: 16-Nov-17 f. A row of components must be centered between tapes 0.047" [1.19 mm]. In addition, individual components may deviate from center of component row 0.031" [0.79 mm]. g. Staples shall not be used for splicing. Not more than 4 layers of tape shall be used in any splice area and no tape shall be offset from another by more than 0.031" [0.79 mm] non-cumulative. Tape splices shall overlap at least 6.0" [152.4 mm] for butt joints and at least 3.0" [76.2 mm] for lap joints and shall not be weaker than unspliced tape. Universal splicing clips may also be used. h. Quantity per reel shall be controlled so that tape components and cover shall not extend beyond the smallest dimension of the flange (either across flats or diameter). Once the quantity per reel for each part number has been established, future orders for that part number shall be packaged in that quantity. When order or release quantity is less than the established quantity, a standard commercial pack is to be used. i. A maximum of 0.25 % of the components per reel quantity may be missing without consecutive missing components. j. Adequate protection must be provided to prevent physical damage to both reel and components during shipment and storage. 4. Marking Minimum reel and carton marking shall consist of the following: customer part number, purchase order no., quantity, package date, manufacturer's name, electrical value, date code, Vishay Sprague part number and country of origin. Document Number: 40015 11 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: 150D395X0015B2T 150D106X9035R2T 150D156X9075S 150D475X9010A2T 150D475X9035B2T 150D476X9020R2T 150D684X9035A2T 150D685X9075R2T 150D106X9020B2T 150D226X9015B2T 150D226X9035R2T 150D105X9035A2T 150D107X9010R2T 150D475X5010A2T 150D683X9035A2B 150D685X9035B2T 150D686X9015R2T 150D825X5035R2B 150D105X5035A2B 150D685X9006A2T 150D685X9050R2T 150D126X9010B2T 150D126X9010B2B 150D223X9125A2T 150D223X9125A2B 150D684X0050A2B 150D104X9035A2T 150D684X0050A2T 150D475X9020B2B 150D276X9015R2B 150D276X9015R2T 150D823X0035A2T 150D273X0050A2B 150D105X0006A2B 150D105X0006A2T 150D565X9020B2B 150D823X0035A2B 150D154X0035A2B 150D154X0035A2T 150D475X0020B2B 150D684X9050A2T 150D684X9050A2B 150D396X9006B2B 150D396X9006B2T 150D105X9006A2T 150D105X9006A2B 150D476X9035S2B 150D154X9035A2B 150D154X9035A2T 150D155X0025A2B 150D226X9035R2B 150D155X0025A2T 150D686X9006R2B 150D686X9006R2T 150D336X9035S2B 150D334X0100A2T 150D334X0100A2B 150D333X0100A2B 150D396X9035S2B 150D333X0100A2T 150D275X0015A2T 150D275X0015A2B 150D274X0015A2T 150D227X9006S2B 150D684X9035A2B 150D276X9035S2T 150D276X9035S2B 150D274X0015A2B 150D106X9035R2B 150D156X9035R2B 150D184X0050A2B 150D187X9010S2B 150D184X0050A2T 150D823X0020A2T 150D126X0060S2T 150D227X9010S2B 150D823X0020A2B 150D474X0050A2B 150D126X0060S2B 150D187X9010S2T 150D474X0050A2T 150D155X0060B2T 150D565X9050R2T 150D274X9050A2T 150D155X0060B2B 150D335X9050B2B 150D276X5020R2B 150D335X0006A2B 150D335X0006A2T 150D337X9006S2B 150D125X0035B2B 150D125X0035B2T 150D106X9010B2T 150D106X9010B2B 150D396X9020R2T 150D394X9035A2B 150D394X9035A2T 150D156X9050R2T 150D473X0020A2B 150D473X0020A2T