HELIAX Coaxial Cables LDF4-75A Cable Ordering Information Attenuation and Average Power Description aM elm len Frequency Attenuation Attenuation Average Power ilar dB/100 ft dB/100m ca Standard Cable 1/2" Standard cable LDF4-75A os oe Otoy oe Fire Retardant Cables 15 oon 0.241 5 1/2" Fire Retardant Jacket (CATVX) LDF4RN-75A 2 0.085 0.279 12.2 1/2" Fire Retardant Jacket (CATVR) LDF4RN-75A 10 0.192 0.630 5.39 20 0.273 0.895 3.80 30 0.335 1.10 3.09 50 0.435 1.43 2.38 88 0.583 1.91 1.77 100 0.623 2.04 1.67 Characteristics 108 0.649 2.13 1.60 ; 150 0.770 2.53 1.35 174 0.833 373 124 Impedance, ohms 7543 200 0.896 2.94 1.15 Maximum Frequency, GHz 10 300 1.11 3.65 0.932 Velocity, percent 88 400 1.30 4.25 0.799 Peak Power Rating, kW 26 450 1.38 4.53 0.751 dc Resistance, ohms/1000 ft (1000 m) 500 1.46 4.80 0.707 inner 1.15 (3.77) 512 1.48 4.86 0.699 Outer 0.58 (1.90) 600 1.62 5.30 0.641 dc Breakdown, volts 4000 700 1.76 5.76 0.590 Jacket Spark, volts RMS 8000 800 1.89 6.20 0.546 Capacitance, pF/ft (m) 15.4 (50.5) B24 4.92 6.31 0.538 Inductance, pH/ft (m)} 0.087 (0.284) 894 2.01 6.60 0.515 , 960 2.09 6.86 0.495 kceidbaddair 1000 2.14 7.02 0.484 Outer Conductor Copper 1250 2.43 7.96 0.427 Inner Conductor Copper-Clad Aluminum 1500 2.69 8.82 0.385 Diameter over Jacket, in (mm) 0.63 (16) 1700 2.39 9.48 0.359 Diameter over Copper Outer Conductor, in (mm) 0.55 (14) 2000 317 10.4 0.327 Minimum Bending Radius, in (mm) 5 (125) 2300 3.44 11.3 0.300 Number of Bends, minimum (typical) 15 (40) 3000 4.03 13,2 0.256 Bending Moment, Ib-ft (Nem) 2.8 (3.8) 4000 4.77 15.7 0.217 Cable Weight, Ib/ft (kg/m) 0.14 (0.21) 5000 5.47 17.9 0.190 Tensile Strength, Ib (kg) 200 (90.7) 6000 6.14 20.1 0.169 Flat Plate Crush Strength, Ib/in (kg/mm) 110 (2.0) 8000 7.35 244 0.140 10000 8.46 27.8 0.122 Standard Conditions: For Attenuation. VSWR 1.0, ambient temperature 24C (75F). For average power, VSWR 1.0 ambient temperature 40C (104F), inner conductor temperature 100C (212F), no solar loading. OANDREW. 536 Customer Service Center - Call toll-free from: * U.S.A., Canada and Mexico 1-800-255-1479Connectors Tal latter Description Type Number Reference Talet=ta Contact Attachment eltic-1g Contact Attachment Plating Code Maximum Tete al a Cilia) Maximum Diameter N Male N Male N Male N Male N Male N Female N Female UHF Male UHF Female 50 Ohm Mating Pin 50 Ohm Mating Pin 70 Ohm Mating Pin 70 Ohm Mating Pin 50 Ohm Mating Pin, Right Angle 50 Ohm Mating Pin 70 Ohm Mating Pin CATV Equipment Housing Splice L4NM-7550 L4NM-7550-H L4NM-7570 L4NM-7570-H L4NR-7550 L4NF-7550 L4NF-7570 L44P-75 L44u-75 48070 L44Z-75 L44W-75 L44W-70 206161 L44N-75 L44N-70 Solder Solder Solder Solder Solder Solder Solder Solder Solder Solder Self Flare Self Flare Self Flare Self Flare Self Flare Self Flare Self Flare Self Flare Self Flare Self Flare Self Flare BB BB BB BB NB BB BB BB BB BB 2.5 (64) 2.5 (64) 2.5 (64) 2.5 (64) 3.2/1.5 (81/38) 2.5 (64) 2.3 (58) 2.3 (58) 2.3 (58) 2.0 (50) 3.2 (81) in (mm) 0.91 (23.1) 0.94 (23.8) 0.91 (23.1) 0.94 (23.8) 0.95 (24.1) 0.91 (23.1) 0.91 (23.1) 0.91 (23.1) 0.91 (23.1) 0.91 (23.1) 1.1 (27.9) Plating Codes: BB - Brass Body and Pin, NB - Nickel Plated Body and Brass Pin * U.K. 0800-250055 * Republic of ireland 1-800-535358 + Australia 1800-803 219 New Zealand 0800-441-747 TEN DREW. 537Accessories Photos and descriptions on pages 544.572. 13/-tyergls)areli) Type No. Description Type No. Hangers and Adapters - Grounding and Surge Protection - for more hangers and adapters see pages 547-557. for more information, see pages 559-564. Standard Hangers and Adapters Grounding Kit Standard Hanger Kit of 10. Standard tower factory attached, one-hole lug, contiguration spacing is 3-4 feet (1-1.2 m). 24 in (610 mm) lead 204989-1 Recommended maximum spacing for factory attached, two-hole lug, outdoor installation is 3 ft (0.91 m) at 24 in (610 mm) lead 241088-1 125 mph (200 km/h) wind, 1/2" (13 mm) field attachable crimp-on, one-hole lug, radial ice. For different wind and ice loading 36 in (915 mm) lead 204989-21 spacing recommendations, refer to Cable field attachable crimp-on, two-hole lug, Hanger Spacing, page 547. 43211A 36 in (915 mm) lead 241088-6 Hardware Kit of 10, Crimping Tool to fieid attach lug to Grounding Kit 207270 3h ya 18 wn tong nuts 31769-5 Weatherproofing - for more information, see page 565. 1" (25) mm long 31769-1 Cold Shrink Weatherproofing Kit Angle Adapter. kit of 10 1/2" Coax-Type N to 1/2" Coax-Type N 241474-4 < e | oeetaal OPT. 31768A 7/8" Coax-Type N to1/2" Coax-Type N 241475-1 a ae ess 5 ee 342774 1-1/4" or 1-5/8" Coax-Type N to 1/2" Coax-Type N 241475-2 Galvanize a. metric hard 242774-M 7/8" Coax-7-16 DIN to 1/2" LDF4 - 7-16 DIN 241475-4 alvanized, metric nardware 1-1/4" or 1-5/8" Coax-7-16 DIN to LDF4 -7-16 DIN 241475-5 Round Member Adapter Kit of 10. 2-1/4" Coax-7-16 DIN to 1/2" LDF4 - 7-16 DIN 241475-8 Stainless steel Member Diameter, in (mm) 1/2" Coax -Type N to Antenna Output 241548-4 1-2 (25-50) 31670-1 1/2" LDF4 -7-16 DIN to Antenna Output 241548-6 2-3 (50-75) 31670-2 Connector/Splice Weatherproofing Kit, 3-4 (75-100) 31670-3 covers twelve splices 221213 4-5 (100-125) 31670-4 P 5-6 (125-150) 31670-5 Entry Systems - for more information, see pages 566-567. 6-8 (150-200) 31670-6 Wall/Roof Feed-Thru 40656A-3 Snap-In Hangers and Adapters Feed-Thru Plates and Boots. Order separately. Snap-in Hanger Kit of 10. For prepunched Plates Plates ait 0 (tom) holes on tower members Openings For 4 in Boots For 5 in Boots adapters below. Standard tower configuration - . spacing is 3-4 feet (1-1.2 m). Recommended aodeve> 48940-1 maximum spacing for outdoor installation is 2 48940-2 1.5 ft (0.46 m) at 125 mph (200 km/h) wind, 3 48940-3 1/2" (13 mm) radial ice. For different wind and ice 4 204673-4 48940-4 loading spacing recommendations, refer to 6 48940-6 Cable Hanger Spacing, page 547. 206706-1 8 204673-8 Tower Hanger/Adapter, attaches to existing 12 204673-12 angle tower members i i t cable run, 1 connection required 206929-1 4 in Boots 8 in Boots 4 cable runs, 2 connections required 206929-4 One Hole: 204679-5 48939-6 8 cable runs, 3 connections required 206929-8 Three Hole: 204679-7 ; 48939-8 J-Bolt Hardware Kit of 10 for use with ArrestorPort Plus. Wall entry plate and integrated Tower/Hanger Adapter 206930 ground bar assembly. APPORT-(*)-(**) Use with Arrestor Plus surge protector series. Available in many configurations see page 562 for available options and ordering information. * Number of surge arrestor openings in the plate. ** Number of cable feed thru ports at the top. Hanger Blox kit of 3. Injection molded plastic, stackable. 6 runs per unit; 18 runs per bundle. Standard tower configuration spacing is 3-4 feet (1-1.2 m). Recommended maximum spacing for outdoor installation is 3 ft (0.91 m) at 125 mph (200 km/h) wind, 1/2" (13 mm) radial Tools - for more tools see page 569. ice, bolted to tower. For different wind and ice EASIAX Cutting Tool 207866 loading spacing recommendations, refer to Cable Flare Tool 224363 Cable Hanger Spacing, page 547. HB-4 Cutoff Guide, 7/32 (5.5 mm) 224361 See page 557 for supporting accessories. Installer Pax. Bulk packs are available for some Hanger Blox Hardware Kit. hangers, adapters, grounding kits and cold shrink Starter Kit HBSH-456 weatherproofing kits. See page 570. Extender Kit HBEH-456 Nylon Cable Tie Kit of 50. Recommended maximum spacing for outdoor installations is 3 ft (1 m) 40417 Nylon Cable Tie Kit in Plastic Box. 100 each, 4, 5.5, and 7.5 inch (101,140, and 190 mm) ties. Recommended maximum spacing for outdoor installations is 3 ft (1 m) CT-K350 Velcro Cable Ties. Black, 8 inch. For indoor use only Kit of 10 VCT8-10 Kit of 50 VCT8-50 Insulated Hangers and Adapters - please refer to page 554-555. Hoisting Grip 43094 ANDREW. 538 Customer Service Center - Call toll-free from: U.S.A., Canada and Mexico 1-800-255-1479