Document Number: 34034 For technical questions, contact: magnetics@vishay.com www.vishay.com
Revision: 15-Jul-09 1
Inductors, Commercial, Molded, Axial Leaded
IM-6-RFCS-40
Vishay Dale
ELECTRICAL SPECIFICATIONS
Inductance Tolerance: ± 10 % on Q-meter for 0.10 μH to
22 μH, ± 5 % 1000 cps bridge for 27 μH to 100 μH, ± 5 %
on Q-meter for 120 μH to 1000 μH
Note
• L and Q are not always tested at the same frequency, inductance
values that are tested on Q-meter, are tested at standard test
frequencies
Dielectric Strength: 700 VRMS at sea level
Operating Temperature: - 55 °C to + 125 °C
Self-Resonant Frequency: Minimum SRF measured with
full length leads on grid-dip meter
Q: Measured on Q-meter
DENSITY SPECIFICATIONS
Weight: 0.9 g maximum
FEATURES
• Classification is grade 1, class B
• Inductance range is 0.10 μH to 1000 μH
• Proven reliability molded inductors
• Compliant to RoHS directive 2002/95/EC
MECHANICAL SPECIFICATIONS
Terminal Strength: Meets 5 lb pull per MIL-PRF-15305
(latest revision)
ENVIRONMENTAL SPECIFICATIONS
Moisture and Shock Resistance: Meets requirements of
MIL-PRF-15305, grade 1, class B
Vibration: High frequency, 10 Hz to 2000 Hz at 20 g ± 10 %
maximum for 12 logarythmic swings, each of 20 min
duration repeated for each of three mutually perpendicular
planes
DIMENSIONS in inches [millimeters]
STANDARD ELECTRICAL SPECIFICATIONS
MODEL (1)
IND.
(μH)
TOL.
(%)
Q
MIN.
TEST FREQUENCY
(MHz)
SRF MIN.
(MHz)
DCR MAX.
(Ω)
RATED DC CURRENT
(mA)
IM-6RFCS-40 0.10 ± 10 75 50 400 0.02 4000
PHENOLIC CORE
IM-6RFCS-40 0.12 ± 10 75 50 400 0.025 3500
IM-6RFCS-40 0.15 ± 10 75 50 400 0.03 3000
IM-6RFCS-40 0.18 ± 10 75 50 400 0.03 3000
IM-6RFCS-40 0.22 ± 10 75 50 400 0.03 3000
IM-6RFCS-40 0.27 ± 10 70 45 376 0.04 2700
IM-6RFCS-40 0.33 ± 10 70 40 352 0.05 2500
IM-6RFCS-40 0.39 ± 10 65 40 320 0.08 2000
IM-6RFCS-40 0.47 ± 10 60 25 288 0.08 2000
IM-6RFCS-40 0.56 ± 10 55 25 264 0.10 1700
IM-6RFCS-40 0.68 ± 10 55 25 240 0.12 1500
IM-6RFCS-40 0.82 ± 10 50 25 220 0.18 1300
IM-6RFCS-40 1.0 ± 10 50 20 200 0.24 1100
IM-6RFCS-40 1.2 ± 10 45 20 176 0.35 1000
IM-6RFCS-40 1.5 ± 10 45 15 160 0.43 850
IM-6RFCS-40 1.8 ± 10 45 15 144 0.65 720
IM-6RFCS-40 2.2 ± 10 45 15 132 0.80 610
Note
(1) Model electricals and tolerances shown
1.30 [33.02]
Typ. Min.
# 22 0.025 ± 0.002
[0.635 ± 0.051]
TCW
0.440 ± 0.010
[11.35 ± 0.254]
0.190 ± 0.010
[4.83 ± 0.254]
www.vishay.com For technical questions, contact: magnetics@vishay.com Document Number: 34034
2Revision: 15-Jul-09
IM-6-RFCS-40
Vishay Dale Inductors, Commercial, Molded, Axial Leaded
IM-6RFCS-40 2.7 ± 10 55 10 88 0.12 1600
IRON CORE
IM-6RFCS-40 3.3 ± 10 55 10 80 0.15 1400
IM-6RFCS-40 3.9 ± 10 60 10 76 0.23 1200
IM-6RFCS-40 4.7 ± 10 70 7.9 72 0.30 1000
IM-6RFCS-40 5.6 ± 10 65 7.9 64 0.45 900
IM-6RFCS-40 6.8 ± 10 65 7.9 56 0.55 800
IM-6RFCS-40 8.2 ± 10 60 7.9 52 0.65 720
IM-6RFCS-40 10 ± 10 60 5.0 48 0.73 650
IM-6RFCS-40 12 ± 10 65 5.0 42 1.1 590
IM-6RFCS-40 15 ± 10 80 2.5 38 1.4 500
IM-6RFCS-40 18 ± 10 75 2.5 34 1.6 460
IM-6RFCS-40 22 ± 10 75 2.5 32 1.8 430
IM-6RFCS-40 27 ± 5 75 2.5 29 2.7 360
IM-6RFCS-40 33 ± 5 85 2.5 26 3.5 300
IM-6RFCS-40 39 ± 5 80 2.5 21 3.8 290
IM-6RFCS-40 47 ± 5 80 2.5 18 4.0 275
IM-6RFCS-40 56 ± 5 75 2.5 15 4.4 265
IM-6RFCS-40 68 ± 5 75 2.5 13 4.7 250
IM-6RFCS-40 82 ± 5 75 2.5 10 5.3 235
IM-6RFCS-40 100 ± 5 75 1.5 8.0 6.0 220
IM-6RFCS-40 120 ± 5 65 0.79 5.7 5.0 170
IM-6RFCS-40 150 ± 5 65 0.79 5.4 5.8 164
IM-6RFCS-40 180 ± 5 65 0.79 5.0 6.6 158
IM-6RFCS-40 220 ± 5 65 0.79 4.7 7.4 155
IM-6RFCS-40 270 ± 5 65 0.79 4.5 8.0 150
IM-6RFCS-40 300 ± 5 65 0.79 4.2 8.6 145
IM-6RFCS-40 330 ± 5 65 0.79 4.0 8.9 142
IM-6RFCS-40 360 ± 5 65 0.79 3.8 9.6 137
IM-6RFCS-40 390 ± 5 65 0.79 3.6 9.9 135
IM-6RFCS-40 430 ± 5 65 0.79 3.4 10.4 131
IM-6RFCS-40 470 ± 5 65 0.79 3.2 10.9 128
IM-6RFCS-40 510 ± 5 65 0.79 3.0 11.6 124
IM-6RFCS-40 560 ± 5 65 0.79 2.9 11.8 123
IM-6RFCS-40 620 ± 5 60 0.79 2.8 12.5 120
IM-6RFCS-40 680 ± 5 60 0.79 2.7 13.5 115
IM-6RFCS-40 750 ± 5 60 0.79 2.6 14.0 113
IM-6RFCS-40 820 ± 5 60 0.79 2.5 15.0 110
IM-6RFCS-40 910 ± 5 60 0.79 2.4 15.5 107
IM-6RFCS-40 1000 ± 5 60 0.79 2.2 16.5 104
MARKING
- Color coded per MIL-PRF-15305 (latest revision)
ORDERING INFORMATION
IM-6RFCS-40 10 μH ± 10 % ER e2
MODEL INDUCTANCE
VALUE
INDUCTANCE
TOLERANCE
PACKAGE
CODE
JEDEC LEAD (Pb)-FREE
STANDARD
GLOBAL PART NUMBER
IM06RFCS ER 100 K 40
MODEL PACKAGE
CODE
INDUCTANCE
VALUE
INDUCTANCE
TOLERANCE
SERIES
STANDARD ELECTRICAL SPECIFICATIONS
MODEL (1)
IND.
(μH)
TOL.
(%)
Q
MIN.
TEST FREQUENCY
(MHz)
SRF MIN.
(MHz)
DCR MAX.
(Ω)
RATED DC CURRENT
(mA)
Note
(1) Model electricals and tolerances shown
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
