Document 699-1 Chip Inductors - 0201DS Series (0603) Request free evaluation samples by contacting Coilcraft or visiting www.coilcraft.com. * 0201 size; world's smallest wirewound inductor * 32 inductance values from 0.5 to 14 nH Inductance2 Part number1 0201DS-0N5XKL_ 0201DS-0N6XKL_ 0201DS-1N2XJL_ 0201DS-1N3XJL_ 0201DS-1N4XJL_ 0201DS-1N5XJL_ 0201DS-2N2XJL_ 0201DS-2N3XJL_ 0201DS-2N4XJL_ 0201DS-2N5XJL_ 0201DS-3N3XJL_ 0201DS-3N4XJL_ 0201DS-3N5XJL_ 0201DS-3N6XJL_ 0201DS-3N7XJL_ 0201DS-3N8XJL_ 0201DS-3N9XJL_ 0201DS-4N8XJL_ 0201DS-5N2XJL_ 0201DS-5N5XJL_ 0201DS-6N7XJL_ 0201DS-7N0XJL_ 0201DS-7N5XJL_ 0201DS-8N2XJL_ 0201DS-8N7XJL_ 0201DS-9N0XJL_ 0201DS-9N4XJL_ 0201DS-9N6XJL_ 0201DS-11NXJL_ 0201DS-12NXJL_ 0201DS-13NXJL_ 0201DS-14NXJL_ (nH) 0.5 0.6 1.2 1.3 1.4 1.5 2.2 2.3 2.4 2.5 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.8 5.2 5.5 6.7 7.0 7.5 8.2 8.7 9.0 9.4 9.6 11.0 12.0 13.0 14.0 Percent tolerance 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 900 MHz L typ Q typ3 0.50 29 0.58 31 1.16 42 1.24 38 1.35 27 1.47 28 2.23 32 2.28 45 2.36 35 2.50 31 3.31 42 3.38 42 3.41 44 3.53 40 3.65 39 3.81 38 3.89 35 4.83 34 5.21 36 5.49 35 6.71 40 6.97 39 7.44 36 8.14 37 8.68 38 9.02 42 9.38 36 9.62 38 11.11 40 12.15 39 13.12 38 14.13 37 1. When ordering, please specify termination and packaging codes: 0201DS-14NXJLW Termination: L = RoHS compliant silver-platinum-glass frit. E = Halogen free component. RoHS compliant matte tin over nickel over silver terminations. Packaging: W = 7 machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). U = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead. 2. Inductance measured at 250 MHz using a Coilcraft SMD-F fixture in an Agilent/HP 4286 impedance analyzer with Coilcraft-provided correlation pieces. 3. Q measured using an Agilent/HP 4291A with an Agilent/HP 16197 test fixture. 4. SRF measured using an Agilent/HP 8722ES network analyzer and a test fixture with a 0.010 air gap. 5. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test fixture. 6. Current that causes a 15C temperature rise from 25C ambient. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. 1.7 GHz L typ Q typ3 0.49 43 0.58 51 1.16 60 1.24 57 1.34 37 1.47 40 2.23 32 2.28 64 2.36 53 2.49 44 3.32 62 3.42 62 3.45 64 3.57 61 3.66 58 3.81 60 3.89 50 4.83 50 5.21 55 5.49 50 6.72 59 6.97 60 7.46 50 8.22 53 8.74 59 9.04 63 9.39 51 9.64 53 11.15 62 12.20 56 13.22 52 14.37 51 SRF typ4 (GHz) 23.5 24.5 17.9 17.6 17.0 17.0 16.7 16.5 13.0 12.5 12.8 12.7 12.4 12.5 10.6 10.2 11.2 11.0 10.0 9.5 6.8 6.7 6.8 6.4 6.3 6.4 6.4 6.2 5.7 5.6 6.7 5.1 DCR max5 (Ohms) 0.020 0.030 0.042 0.048 0.080 0.090 0.070 0.070 0.082 0.165 0.080 0.080 0.080 0.105 0.105 0.180 0.240 0.096 0.170 0.285 0.150 0.210 0.340 0.270 0.350 0.350 0.400 0.400 0.400 0.360 0.440 0.440 Irms6 (mA) 1250 1000 870 820 630 600 700 670 620 440 630 630 630 550 550 420 360 570 430 330 460 390 300 340 300 300 280 280 280 300 270 270 Designer's Kit C425 contains 20 each of all values Core material Ceramic Environmental RoHS compliant, halogen free optional Terminations RoHS compliant silver-platinum-glass frit. Weight 0.14 - 0.23 mg Ambient temperature -40C to +125C with Irms current, +125C to +140C with derated current Storage temperature Component: -40C to +140C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 2000 per 7 reel. Paper tape: 8 mm wide, 0.6 mm thick, 2 mm pocket spacing PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 699-1 Revised 03/19/13 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 699-2 0201DS Chip Inductor Series (0603) Typical Q vs Frequency Typical L vs Frequency 100 18 80 16 2.3 nH 3.9 nH 7.0 nH 60 50 12.0 nH 40 30 Inductance (nH) 90 70 Q Factor 20 0.6 nH 14 12.0 nH 12 10 8 7.0 nH 6 20 4 3.9 nH 10 2 2.3 nH 0 1 10 100 1000 0 10000 0.6 nH 1 10 100 10000 Frequency (MHz) Frequency (MHz) Irms Derating B overall 120 Pick and place material C D 110 H G F A 100 G D 90 80 E terminal 70 60 50 40 30 Terminal wraparound: approx 0.006/0,15 both ends A max B max C max 0.023 0.018 0.0177 0.004 0,58 0,46 0,45 D 0,10 Recommended Land Pattern E F G H 0.015 0.009 0.007 0.018 inches 0,38 0,23 0,18 0,46 mm 25C Percent of rated Irms 1000 20 10 0 -40 -20 0 20 40 60 80 100 120 140 Ambient temperature (C) US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 699-2 Revised 03/19/13 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.