Snap-In Enclsoures
Page <1> 03/01/11 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Specifications:
Material : High impact of UL94-HB ABS.
Ligh grey and black colors are available for selection.
Snap-in design can be opened and closed easily without the tool.
Rubber of the cable entry can be cut by knife easily for the cable connection.
4 PCS of internal bosses are available for pcb assembly.
Ideally use for indoor/outdoor telecommunication device.
Snap-In Enclsoures
Page <2> 03/01/11 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Base
Base
Lid
Lid
Rubber
Rubber
GH001G;GH001B
GH002G;GH002B
Dimensions : Millimetres
Dimensions : Millimetres
Snap-In Enclsoures
Page <3> 03/01/11 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or ar e licensed to it. No licence is granted for the use of it other than for information purposes
in connection with the products to which it relates. No licence of any intellectual pr operty rights is granted. The Information is subject to change without notice and r eplaces all data sheets previously supplied.
The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data
sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage
resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded.
This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. © Premier Farnell plc 2010
Description Cable
Entry External Dimension (mm) Part Number
Length Width Height
Box, ABS, 45X79X91MM, GRY 1 Way
91
79 45 GH001G
Box, ABS, 45X79X91MM, BLK GH001B
Box, ABS, 69X122X91MM, GRY 2 Way 122 69 GH002G
Box, ABS, 69X122X91MM, BLK GH002B
Part number Table