• 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •
SENSITRON _____
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 200, REV C
THREE PHASE FULL WAVE
BRIDGE RECTIFIER ASSEMBLY
DESCRIPTION: 600 VOLT, 50 AMP, 180 NANOSECOND THREE PHASE BRIDGE RECTIFIER ASSEMBLY.
MAX. RATINGS / ELECTRICAL CHARACTERISTICS All ratings are at TA = 25oC unless otherwise specified.
RATING CONDITIONS MIN MAX UNIT
Peak Inverse Voltage (PIV) - - 600 Vdc
Average DC Output Current
(TC = Case Temp)
(Io)
TC = 55 oC
TC = 100 oC
TC = 125 oC
- 50
33
25
Amps
Average DC Output Current
Ambient Temp.
(no heat sink) (Io)
TA = 25 oC
TA = 55 oC
TA = 100 oC
- 12.5
10
6.0
Amps
Peak Single Cycle Surge
Current (IFSM) tp = 8.3 ms Single Half Cycle
Sine Wave, Superimposed On
Rated Load
- 240 Amps(pk)
Peak Recurring Surge Current
(IFRM) TA = 25 oC - 150 Amps
Operating and Storage Temp.
(Top & Tstg) - -55 +150
°C
Maximum Forward Voltage
(Vf) If = 10A (300 µsec pulse, duty
cycle < 2%) - 1.2 Volts
Maximum Instantaneous
Reverse Current At Rated
(PIV)
TA = 25° C
TA = 100°C
- 9.0
180
µAmps
Reverse Recovery Time (trr) If = 0.5A, Ir = 1.0A, Irr = 0.25A - 180 nsec
Thermal Resistance (θJL) - - 0.9
°C/W
S50A360FR
• 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •
SENSITRON
TECHNICAL DATA
DATA SHEET 200, REV C
MECHANICAL DIMENSIONS: In inches / mm
Note: Case finish - Black Anodized
S50A360FR
AC AC AC
+
–
0
.
6
4
0.56
(16
.
3
14.2)
.34
.26 (8.64
6.60)
2.00
(50.8)
1.25 Max
(31.7)
.30(7.62)
5 Places .171(4.34) Dia.
5 Places
.63
(16.0)
1.50
(38.1)
1.00
(25.4)
.50
(12.7)
.36
.27 (8.89
6.86)
10-32 Thd x .25 (6.35) Deep
(2 Places)
0
.
6
4
0.56
(16
.
3
14.2)
.34
.26 (8.64
6.60)
.36
.27 (8.89
6.86)
AC AC AC
+
–
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
Fig. 412
