74LCX125 Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs Features General Description 5V tolerant inputs and outputs The LCX125 contains four independent non-inverting buffers with 3-STATE outputs. The inputs tolerate voltages up to 7V allowing the interface of 5V systems to 3V systems. 2.3V-3.6V VCC specifications provided 6.0ns tPD max. (VCC = 3.3V), 10A ICC max. Power down high impedance inputs and outputs Supports live insertion/withdrawal(1) 24mA output drive (VCC = 3.0V) Implements proprietary noise/EMI reduction circuitry The 74LCX125 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining CMOS low power dissipation. Latch-up performance exceeds JEDEC 78 conditions ESD performance: - Human body model > 2000V - Machine model > 100V Leadless DQFN package Note: 1. To ensure the high-impedance state during power up or down, OE should be tied to VCC through a pull-up resistor: the minimum value of the resistor is determined by the current-sourcing capability of the driver. Ordering Information Order Number 74LCX125M 74LCX125SJ Package Number M14A M14D Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74LCX125BQX(2) MLP14A 14-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 3.0mm 74LCX125MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Note: 2. DQFN package available in Tape and Reel only. Device also available in Tape and Reel. Specify by appending suffix letter "X" to the ordering number. All packages are lead free per JEDEC: J-STD-020B standard. (c)1995 Fairchild Semiconductor Corporation 74LCX125 Rev. 1.7.0 www.fairchildsemi.com 74LCX125 -- Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs February 2008 Logic Symbol Pin Assignments for SOIC, SOP, and TSSOP IEEE/IEC (Top View) Pad Assignments for DQFN Truth Table Inputs Output OEn An On L L L L H H H X Z H = HIGH Voltage Level L = LOW Voltage Level Z = High Impedance X = Immaterial (Top Through View) Pin Description Pin Names An Description Inputs OEn Output Enable Inputs On Outputs (c)1995 Fairchild Semiconductor Corporation 74LCX125 Rev. 1.7.0 www.fairchildsemi.com 2 74LCX125 -- Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs Connection Diagrams Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC Parameter Rating Supply Voltage -0.5V to +7.0V VI DC Input Voltage -0.5V to +7.0V VO DC Output Voltage, Output in 3-STATE -0.5V to +7.0V State(3) -0.5V to VCC + 0.5V IIK DC Input Diode Current, VI < GND -50mA IOK DC Output Diode Current Output in HIGH or LOW VO < GND -50mA VO > VCC +50mA IO DC Output Source/Sink Current 50mA ICC DC Supply Current per Supply Pin 100mA IGND DC Ground Current per Ground Pin 100mA TSTG Storage Temperature -65C to +150C Note: 3. IO Absolute Maximum Rating must be observed. Recommended Operating Conditions(4) The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC Parameter Min. Max. Units Operating 2.0 3.6 V Data Retention 1.5 3.6 0 5.5 V HIGH or LOW State 0 VCC V 3-STATE 0 5.5 Supply Voltage VI Input Voltage VO Output Voltage IOH / IOL TA t / V Output Current VCC = 3.0V-3.6V 24 VCC = 2.7V-3.0V 12 VCC = 2.3V-2.7V 8 Free-Air Operating Temperature Input Edge Rate, VIN = 0.8V-2.0V, VCC = 3.0V mA -40 85 C 0 10 ns / V Note: 4. Unused inputs must be held HIGH or LOW. They may not float. (c)1995 Fairchild Semiconductor Corporation 74LCX125 Rev. 1.7.0 www.fairchildsemi.com 3 74LCX125 -- Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs Absolute Maximum Ratings TA = -40C to +85C Symbol VIH VIL VOH VOL Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage LOW Level Output Voltage VCC (V) Conditions Min. 2.3-2.7 1.7 2.7-3.6 2.0 Max. V 2.3-2.7 0.7 2.7-3.6 0.8 2.3-3.6 IOH = -100A IOH = -8mA 1.8 2.7 IOH = -12mA 2.2 3.0 IOH = -18mA 2.4 IOH = -24mA 2.2 V IOL = 100A 0.2 2.3 IOL = 8mA 0.6 2.7 IOL = 12mA 0.4 3.0 IOL = 16mA 0.4 IOL = 24mA 0.55 2.3-3.6 V VCC - 0.2 2.3 Units V Input Leakage Current 2.3-3.6 0 VI 5.5V 5.0 A IOZ 3-STATE Output Leakage 2.3-3.6 0 VO 5.5V, VI = VIH or VIL 5.0 A IOFF Power-Off Leakage Current 0 VI or VO = 5.5V 10 A ICC Quiescent Supply Current A II ICC Increase in ICC per Input 2.3-3.6 2.3-3.6 VI = VCC or GND 10 3.6V VI, VO 5.5V(5) 10 VIH = VCC - 0.6V 500 A Note: 5. Outputs disabled or 3-STATE only. AC Electrical Characteristics TA = -40C to +85C, RL = 500 VCC = 3.3V 0.3V, CL = 50 pF Symbol Parameter VCC = 2.7V, CL = 50 pF VCC = 2.5V 0.2V, CL = 30 pF Min. Max. Min. Max. Min. Max. Units 1.5 6.0 1.5 6.5 1.5 7.2 ns tPHL, tPLH Propagation Delay tPZL, tPZH Output Enable Time 1.5 7.0 1.5 8.0 1.5 9.1 ns tPLZ, tPHZ Output Disable Time 1.5 6.0 1.5 7.0 1.5 7.2 ns tOSHL, tOSLH Output to Output Skew(6) 1.0 ns Note: 6. Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH). (c)1995 Fairchild Semiconductor Corporation 74LCX125 Rev. 1.7.0 www.fairchildsemi.com 4 74LCX125 -- Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs DC Electrical Characteristics TA = 25C Symbol Parameter VCC (V) VOLP Quiet Output Dynamic Peak VOL 3.3 VOLV Quiet Output Dynamic Valley VOL Conditions Typical Unit CL = 50pF, VIH = 3.3V, VIL = 0V 0.8 V 2.5 CL = 30pF, VIH = 2.5V, VIL = 0V 0.6 3.3 CL = 50pF, VIH = 3.3V, VIL = 0V -0.8 2.5 CL = 30pF, VIH = 2.5V, VIL = 0V -0.6 V Capacitance Symbol Parameter Conditions Typical Units Input Capacitance VCC = Open, VI = 0V or VCC 7.0 pF COUT Output Capacitance VCC = 3.3V, VI = 0V or VCC 8.0 pF CPD Power Dissipation Capacitance VCC = 3.3V, VI = 0V or VCC, f = 10MHz 25.0 pF CIN (c)1995 Fairchild Semiconductor Corporation 74LCX125 Rev. 1.7.0 www.fairchildsemi.com 5 74LCX125 -- Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs Dynamic Switching Characteristics Test Switch tPLH, tPHL Open tPZL, tPLZ 6V at VCC = 3.3 0.3V VCC x 2 at VCC = 2.5 0.2V tPZH, tPHZ GND Figure 1. AC Test Circuit (CL includes probe and jig capacitance) Waveform for Inverting and Non-Inverting Functions 3-STATE Output High Enable and Disable Times for Logic Propagation Delay. Pulse Width and trec Waveforms Setup Time, Hold Time and Recovery Time for Logic 3-STATE Output Low Enable and Disable Times for Logic trise and tfall VCC Symbol 3.3V 0.3V 2.7V 2.5V 0.2V Vmi 1.5V 1.5V VCC / 2 Vmo 1.5V 1.5V VCC / 2 Vx VOL + 0.3V VOL + 0.3V VOL + 0.15V Vy VOH - 0.3V VOH - 0.3V VOH - 0.15V Figure 2. Waveforms (Input Characteristics; f = 1MHz, tr = tf = 3ns) (c)1995 Fairchild Semiconductor Corporation 74LCX125 Rev. 1.7.0 www.fairchildsemi.com 6 74LCX125 -- Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs AC Loading and Waveforms (Generic for LCX Family) 74LCX125 -- Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs Schematic Diagram (Generic for LCX Family) (c)1995 Fairchild Semiconductor Corporation 74LCX125 Rev. 1.7.0 www.fairchildsemi.com 7 Tape Format for DQFN Package Designator Tape Section Number of Cavities Cavity Status Cover Tape Status BQX Leader (Start End) 125 (Typ.) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (Typ.) Empty Sealed Tape Dimensions inches (millimeters) Reel Dimensions inches (millimeters) Tape Size A B C D N W1 W2 12mm 13.0 (330.0) 0.059 (1.50) 0.512 (13.00) 0.795 (20.20) 2.165 (55.00) 0.488 (12.4) 0.724 (18.4) (c)1995 Fairchild Semiconductor Corporation 74LCX125 Rev. 1.7.0 www.fairchildsemi.com 8 74LCX125 -- Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs Tape and Reel Specification 74LCX125 -- Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs Physical Dimensions 8.75 8.50 0.65 A 7.62 14 8 B 5.60 4.00 3.80 6.00 PIN ONE INDICATOR 1 1.70 7 0.51 0.35 1.27 0.25 1.27 LAND PATTERN RECOMMENDATION M C B A (0.33) 1.75 MAX 1.50 1.25 SEE DETAIL A 0.25 0.10 C 0.25 0.19 0.10 C NOTES: UNLESS OTHERWISE SPECIFIED A) THIS PACKAGE CONFORMS TO JEDEC MS-012, VARIATION AB, ISSUE C, B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS DO NOT INCLUDE MOLD GAGE PLANE FLASH OR BURRS. D) LANDPATTERN STANDARD: SOIC127P600X145-14M 0.36 E) DRAWING CONFORMS TO ASME Y14.5M-1994 F) DRAWING FILE NAME: M14AREV13 0.50 X 45 0.25 R0.10 R0.10 8 0 0.90 0.50 (1.04) SEATING PLANE DETAIL A SCALE: 20:1 Figure 3. 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)1995 Fairchild Semiconductor Corporation 74LCX125 Rev. 1.7.0 www.fairchildsemi.com 9 74LCX125 -- Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs Physical Dimensions (Continued) Figure 4. 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)1995 Fairchild Semiconductor Corporation 74LCX125 Rev. 1.7.0 www.fairchildsemi.com 10 74LCX125 -- Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs Physical Dimensions (Continued) Figure 5. 14-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 3.0mm Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)1995 Fairchild Semiconductor Corporation 74LCX125 Rev. 1.7.0 www.fairchildsemi.com 11 0.65 0.43 TYP 1.65 6.10 0.45 12.00 TOP & BOTTOM R0.09 min A. CONFORMS TO JEDEC REGISTRATION MO-153, VARIATION AB, REF NOTE 6 B. DIMENSIONS ARE IN MILLIMETERS C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH, AND TIE BAR EXTRUSIONS D. DIMENSIONING AND TOLERANCES PER ANSI Y14.5M, 1982 E. LANDPATTERN STANDARD: SOP65P640X110-14M F. DRAWING FILE NAME: MTC14REV6 1.00 R0.09min Figure 6. 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)1995 Fairchild Semiconductor Corporation 74LCX125 Rev. 1.7.0 www.fairchildsemi.com 12 74LCX125 -- Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs Physical Dimensions (Continued) ACEx(R) Build it NowTM CorePLUSTM CROSSVOLTTM CTLTM Current Transfer LogicTM EcoSPARK(R) EZSWITCHTM * TM PDP-SPMTM Power220(R) POWEREDGE(R) Power-SPMTM PowerTrench(R) Programmable Active DroopTM QFET(R) QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM SMART STARTTM SPM(R) STEALTHTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 FPSTM FRFET(R) Global Power ResourceSM Green FPSTM Green FPSTMe-SeriesTM GTOTM i-LoTM IntelliMAXTM ISOPLANARTM MegaBuckTM MICROCOUPLERTM MicroFETTM MicroPakTM MillerDriveTM Motion-SPMTM OPTOLOGIC(R) OPTOPLANAR(R) (R) Fairchild(R) Fairchild Semiconductor(R) FACT Quiet SeriesTM FACT(R) FAST(R) FastvCoreTM FlashWriter(R) * (R) SupreMOSTM SyncFETTM (R) The Power Franchise(R) TinyBoostTM TinyBuckTM TinyLogic(R) TINYOPTOTM TinyPowerTM TinyPWMTM TinyWireTM SerDesTM UHC(R) Ultra FRFETTM UniFETTM VCXTM * EZSWITCHTM and FlashWriter(R) are trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I33 (c)1995 Fairchild Semiconductor Corporation 74LCX125 Rev. 1.7.0 www.fairchildsemi.com 13 74LCX125 -- Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.