Jersey City, NJ 07302 USA
Environmental Specifications
Consult manufacturer for other ratings
All tests were conducted with the fuses soldered to a printed circuit boards with a nominal thickness of 1.6 mm. The copper t
was a printed circuit with an overall length of 100 mm, copper thickness/width as described
below. The printed circuit
oards were mounted by screws to a test fixture having brass
blocks for connection of the
ll samples were soldered to the test boards by the
(100 G's peak for 6 milliseconds; Sawtooth
55 Hz, 0.06 inch, total excursion).
202G, Method 302, Test Condition A
(After Opening) 10,000 ohms minimum.
Resistance to solder Heat
202G, Method 210F, Test Condition C.
202G, Method 107G, Test Condition B
Moisture Sensitivity Level
10% operating power for 1000 hrs
202 Method 108, Test Condition D
202 Method 213,Test Condition C
202 Method 210,Test condition B
Electrical characterization
Test Board Trace Dimensions
1 oz. copper, 5.0mm wide.
cifications subject to change without notice