Switch-mode Power Rectifier DPAK Surface Mount Package MURD620CT, NRVUD620CT, SRVUD620CT, SNRVUD620CT These state-of-the-art devices are designed for use in switching power supplies, inverters and as free wheeling diodes. Features * * * * * * Ultrafast 35 Nanosecond Recovery Time Low Forward Voltage Drop Low Leakage ESD Rating: Human Body Model = 3B (> 8 kV) Machine Model = C (> 400 V) NRVUD, SRVUD and SNRVUD Prefixes for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant Mechanical Characteristics: * Case: Epoxy, Molded * Weight: 0.4 Gram (Approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260C Max. for 10 Seconds www.onsemi.com ULTRAFAST RECTIFIER 6.0 AMPERES 200 VOLTS DPAK CASE 369C 1 4 3 MARKING DIAGRAMS AYWW U 620TG AYWW U S620TG A = Assembly Location* Y = Year WW = Work Week U620T = Device Code (MURD/NRVUD/ SNRVUD620CT) US620T = Device Code (SRVUD620CT) G = Pb-Free Package * The Assembly Location Code (A) is front side optional. In cases where the Assembly Location is stamped in the package bottom (molding ejecter pin), the front side assembly code may be blank. ORDERING INFORMATION Package Shipping MURD620CTG DPAK (Pb-Free) 75 Units / Rail NRVUD620CTG DPAK (Pb-Free) 75 Units / Rail MURD620CTT4G DPAK (Pb-Free) 2,500 / Tape & Reel NRVUD620CTT4G DPAK (Pb-Free) 2,500 / Tape & Reel SRVUD620CTT4G DPAK (Pb-Free) 2,500 / Tape & Reel SNRVUD620CTT4G DPAK (Pb-Free) 2,500 / Tape & Reel NRVUD620CTG- VF01 DPAK (Pb-Free) 2,500 / Tape & Reel Device For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. (c) Semiconductor Components Industries, LLC, 2016 August, 2020 - Rev. 15 1 Publication Order Number: MURD620CT/D MURD620CT, NRVUD620CT, SRVUD620CT, SNRVUD620CT MAXIMUM RATINGS Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Rating VRRM VRWM VR 200 V Average Rectified Forward Current (TC = 140C) Per Diode Per Device IF(AV) A 3.0 6.0 Peak Repetitive Forward Current (Square Wave, Duty = 0.5, TC = 145C) Per Diode IF A 6.0 Non-Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, 60 Hz) IFSM Operating Junction and Storage Temperature Range TJ, Tstg 50 -65 to +175 A C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS (Per Diode) Characteristic Symbol Value Unit Thermal Resistance, Junction-to-Case RqJC 9 C/W Thermal Resistance, Junction-to-Ambient (Note 1) RqJA 80 C/W Symbol Value Unit 1. Rating applies when surface mounted on the minimum pad sizes recommended. ELECTRICAL CHARACTERISTICS (Per Diode) Characteristic Maximum Instantaneous Forward Voltage Drop (Note 2) (iF = 3 Amps, TC = 25C) (iF = 3 Amps, TC = 125C) (iF = 6 Amps, TC = 25C) (iF = 6 Amps, TC = 125C) vF Maximum Instantaneous Reverse Current (Note 2) (TJ = 25C, Rated dc Voltage) (TJ = 125C, Rated dc Voltage) iR Maximum Reverse Recovery Time (IF = 1 Amp, di/dt = 50 Amps/ms, VR = 30 V, TJ = 25C) (IF = 0.5 Amp, iR = 1 Amp, IREC = 0.25 A, VR = 30 V, TJ = 25C) trr 1 0.96 1.2 1.13 5 250 35 25 V mA ns Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2.0%. www.onsemi.com 2 MURD620CT, NRVUD620CT, SRVUD620CT, SNRVUD620CT TYPICAL CHARACTERISTICS 100 100 IR, REVERSE CURRENT (mA) 70 50 20 10 7.0 150C 1 100C 0.1 0.01 25C 0.001 0.0001 0 20 40 5.0 60 80 100 120 140 160 180 200 VR, REVERSE VOLTAGE (V) Figure 2. Typical Leakage Current* (Per Leg) 3.0 175C * The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these curves if VR is sufficiently below rated VR. TJ = 25C 2.0 150C 100C PF(AV) , AVERAGE POWER DISSIPATION (WATTS) i , INSTANTANEOUS FORWARD CURRENT (AMPS) F 30 TJ = 175C 10 1.0 0.7 0.5 0.3 0.2 0.1 0 0.2 0.4 0.6 1.0 0.8 1.2 1.4 vF, INSTANTANEOUS VOLTAGE (V) 14 13 12 11 10 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 5.0 10 SINE WAVE IPK/IAV = 20 dc SQUARE WAVE TJ = 175C 1.0 0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10 IF(AV), AVERAGE FORWARD CURRENT (A) Figure 1. Typical Forward Voltage (Per Leg) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) Figure 3. Average Power Dissipation (Per Leg) 8.0 RATED VOLTAGE APPLIED RqJC = 9C/W 7.0 6.0 TJ = 175C 5.0 dc 4.0 SINE WAVE OR SQUARE WAVE 3.0 2.0 1.0 0 100 110 120 130 140 150 160 170 180 4.0 RATED VOLTAGE APPLIED RqJA = 80C/W 3.5 3.0 SURFACE MOUNTED ON MIN. PAD SIZE RECOMMENDED 2.5 2.0 dc TJ = 175C 1.5 SINE WAVE OR SQUARE WAVE 1.0 0.5 0 0 20 40 60 80 100 120 140 160 180 200 TC, CASE TEMPERATURE (C) TA, AMBIENT TEMPERATURE (C) Figure 4. Current Derating, Case (Per Leg) Figure 5. Current Derating, Ambient (Per Leg) www.onsemi.com 3 MURD620CT, NRVUD620CT, SRVUD620CT, SNRVUD620CT TYPICAL CHARACTERISTICS C, CAPACITANCE (pF) 100 TJ = 25C 10 1 0 10 20 30 40 50 60 70 80 VR, REVERSE VOLTAGE (V) Figure 6. Typical Capacitance (Per Leg) www.onsemi.com 4 90 100 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS DPAK (SINGLE GAUGE) CASE 369C ISSUE F 4 1 2 DATE 21 JUL 2015 3 SCALE 1:1 A E C A b3 B c2 4 L3 Z D 1 2 H DETAIL A 3 L4 NOTE 7 c SIDE VIEW b2 e b 0.005 (0.13) TOP VIEW BOTTOM VIEW C M Z H L2 GAUGE PLANE C L SEATING PLANE BOTTOM VIEW A1 L1 DETAIL A Z ALTERNATE CONSTRUCTIONS ROTATED 905 CW STYLE 1: PIN 1. BASE 2. COLLECTOR 3. EMITTER 4. COLLECTOR STYLE 6: PIN 1. MT1 2. MT2 3. GATE 4. MT2 STYLE 3: PIN 1. ANODE 2. CATHODE 3. ANODE 4. CATHODE STYLE 8: PIN 1. N/C 2. CATHODE 3. ANODE 4. CATHODE STYLE 4: PIN 1. CATHODE 2. ANODE 3. GATE 4. ANODE STYLE 5: PIN 1. GATE 2. ANODE 3. CATHODE 4. ANODE STYLE 9: STYLE 10: PIN 1. ANODE PIN 1. CATHODE 2. CATHODE 2. ANODE 3. RESISTOR ADJUST 3. CATHODE 4. CATHODE 4. ANODE SOLDERING FOOTPRINT* 6.20 0.244 DIM A A1 b b2 b3 c c2 D E e H L L1 L2 L3 L4 Z INCHES MIN MAX 0.086 0.094 0.000 0.005 0.025 0.035 0.028 0.045 0.180 0.215 0.018 0.024 0.018 0.024 0.235 0.245 0.250 0.265 0.090 BSC 0.370 0.410 0.055 0.070 0.114 REF 0.020 BSC 0.035 0.050 --- 0.040 0.155 --- MILLIMETERS MIN MAX 2.18 2.38 0.00 0.13 0.63 0.89 0.72 1.14 4.57 5.46 0.46 0.61 0.46 0.61 5.97 6.22 6.35 6.73 2.29 BSC 9.40 10.41 1.40 1.78 2.90 REF 0.51 BSC 0.89 1.27 --- 1.01 3.93 --- GENERIC MARKING DIAGRAM* STYLE 2: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN STYLE 7: PIN 1. GATE 2. COLLECTOR 3. EMITTER 4. COLLECTOR NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. THERMAL PAD CONTOUR OPTIONAL WITHIN DIMENSIONS b3, L3 and Z. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.006 INCHES PER SIDE. 5. DIMENSIONS D AND E ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY. 6. DATUMS A AND B ARE DETERMINED AT DATUM PLANE H. 7. OPTIONAL MOLD FEATURE. 2.58 0.102 1.60 0.063 IC Discrete = Device Code = Assembly Location = Wafer Lot = Year = Work Week = Pb-Free Package *This information is generic. Please refer to device data sheet for actual part marking. 6.17 0.243 SCALE 3:1 AYWW XXX XXXXXG XXXXXX A L Y WW G 3.00 0.118 5.80 0.228 XXXXXXG ALYWW mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. DOCUMENT NUMBER: STATUS: NEW STANDARD: 98AON10527D ON SEMICONDUCTOR STANDARD REF TO JEDEC TO-252 http://onsemi.com DPAK SINGLE GAUGE SURFACE 1 MOUNT (c) Semiconductor Components Industries, LLC, 2002 October, DESCRIPTION: 2002 - Rev. 0 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped "CONTROLLED COPY" in red. Case Outline Number: PAGE 1 OFXXX 2 DOCUMENT NUMBER: 98AON10527D PAGE 2 OF 2 ISSUE REVISION DATE O RELEASED FOR PRODUCTION. REQ. BY L. GAN 24 SEP 2001 A ADDED STYLE 8. REQ. BY S. ALLEN. 06 AUG 2008 B ADDED STYLE 9. REQ. BY D. WARNER. 16 JAN 2009 C ADDED STYLE 10. REQ. BY S. ALLEN. 09 JUN 2009 D RELABELED DRAWING TO JEDEC STANDARDS. ADDED SIDE VIEW DETAIL A. CORRECTED MARKING INFORMATION. REQ. BY D. TRUHITTE. 29 JUN 2010 E ADDED ALTERNATE CONSTRUCTION BOTTOM VIEW. MODIFIED DIMENSIONS b2 AND L1. CORRECTED MARKING DIAGRAM FOR DISCRETE. REQ. BY I. CAMBALIZA. 06 FEB 2014 F ADDED SECOND ALTERNATE CONSTRUCTION BOTTOM VIEW. REQ. BY K. MUSTAFA. 21 JUL 2015 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. (c) Semiconductor Components Industries, LLC, 2015 July, 2015 - Rev. F Case Outline Number: 369C ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800-282-9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 www.onsemi.com 1 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative