TN2540N3-G-P002 - Microchip Technology

Supertex inc.

www.supertex.com

Doc.# DSFP-TN2540

A062113

TN2540

Features

►Low threshold (2.0V max.)

►High input impedance

►Low input capacitance (125pF max.)

►Fast switching speeds

►Low on-resistance

►Free from secondary breakdown

►Low input and output leakage

Applications

►Logic level interfaces - ideal for TTL and CMOS

►Solid state relays

►Battery operated systems

►Photo voltaic drives

►Analog and Telecom switches

►General purpose line drivers

General Description

This low threshold, enhancement-mode (normally-off)

transistor utilizes a vertical DMOS structure and Supertex’s

well-proven, silicon-gate manufacturing process. This

combination produces a device with the power handling

capabilities of bipolar transistors and the high input impedance

and positive temperature coefcient inherent in MOS devices.

Characteristic of all MOS structures, this device is free

from thermal runaway and thermally-induced secondary

breakdown.

Supertex’s vertical DMOS FETs are ideally suited to a wide

range of switching and amplifying applications where very

low threshold voltage, high breakdown voltage, high input

impedance, low input capacitance, and fast switching speeds

are desired.

N-Channel Enhancement-Mode

Vertical DMOS FET

Absolute Maximum Ratings

Parameter Value

Drain-to-source voltage BVDSS

Drain-to-gate voltage BVDGS

Gate-to-source voltage ±20V

Operating and storage temperature -55OC to +150OC

Absolute Maximum Ratings are those values beyond which damage to the device

may occur. Functional operation under these conditions is not implied. Continuous

operation of the device at the absolute rating level may affect device reliability. All

voltages are referenced to device ground.

Pin Conguration

TO-92 TO-243AA (SOT-89)

YY = Year Sealed

WW = Week Sealed

= “Green” Packaging

SiTN

2540

YYWW

TO-92

Product Marking

TO-243AA (SOT-89)

TN5DW W = Code for week sealed

= “Green” Packaging

Package may or may not include the following marks: Si or

GATE

SOURCE

DRAIN

GATE

SOURCE

DRAIN

-G denotes a lead (Pb)-free / RoHS compliant package

Refer to ‘P0xx’ Tape & Reel Specs for P002, P003, P005, P013, and P014 TO-92

Taping Specications and Winding Styles

Contact factory for Wafer / Die availablity.

Devices in Wafer / Die form are lead (Pb)-free / RoHS compliant.

Part Number Package Options Packing

TN2540N3-G TO-92 1000/Bag

TN2540N3-G P002 TO-92 2000/Reel

TN2540N3-G P003 TO-92 2000/Reel

TN2540N3-G P005 TO-92 2000/Reel

TN2540N3-G P013 TO-92 2000/Reel

TN2540N3-G P014 TO-92 2000/Reel

TN2540N8-G TO-243AA (SOT-89) 2000/Reel

Ordering Information

Typical Thermal Resistance

Package θja

TO-92 132OC/W

TO-243AA (SOT-89) 133OC/W*

* Mounted on FR5 Board, 25mm x 25mm x 1.57mm

Product Summary

BVDSS/BVDGS

RDS(ON)

(max)

ID(ON)

(min)

VGS(th)

(max)

400V 12Ω1.0A 2.0V

2

Supertex inc.

www.supertex.com

Doc.# DSFP-TN2540

A062113

TN2540

Electrical Characteristics (TA = 25OC unless otherwise specied)

Sym Parameter Min Typ Max Units Conditions

BVDSS Drain-to-source breakdown voltage 400 - - V VGS = 0V, ID = 100µA

VGS(th) Gate threshold voltage 0.6 - 2.0 V VGS = VDS, ID= 1.0mA

ΔVGS(th) Change in VGS(th) with temperature - -2.5 -4.0 mV/OC VGS = VDS, ID= 1.0mA

IGSS Gate body leakage - - 100 nA VGS = ± 20V, VDS = 0V

IDSS Zero gate voltage drain current

- - 10 µA VGS = 0V, VDS = Max Rating

- - 1.0 mA VDS = 0.8 Max Rating,

VGS = 0V, TA = 125°C

ID(ON) On-state drain current 0.3 0.5 - AVGS = 4.5V, VDS = 25V

0.75 1.0 - VGS = 10V, VDS = 25V

RDS(ON) Static drain-to-source on-state resistance - 8.0 12 ΩVGS = 4.5V, ID = 150mA

- 8.0 12 VGS = 10V, ID = 500mA

ΔRDS(ON) Change in RDS(ON) with temperature - - 0.75 %/OC VGS = 10V, ID = 500mA

GFS Forward transductance 125 200 - mmho VDS = 25V, ID = 100mA

CISS Input capacitance - 95 125

pF

VGS = 0V,

VDS = 25V,

f = 1.0MHz

COSS Common source output capacitance - 20 70

CRSS Reverse transfer capacitance - 10 25

td(ON) Turn-on delay time - - 20

ns

VDD = 25V,

ID = 1.0A,

RGEN = 25Ω

trRise time - - 15

td(OFF) Turn-off delay time - - 25

tfFall time - - 20

VSD Diode forward voltage drop - - 1.8 V VGS = 0V, ISD = 200mA

trr Reverse recovery time - 300 - ns VGS = 0V, ISD = 1.0A

Notes:

1. All D.C. parameters 100% tested at 25OC unless otherwise stated. (Pulse test: 300µs pulse, 2% duty cycle.)

2. All A.C. parameters sample tested.

Notes:

† ID (continuous) is limited by max rated Tj .

‡ Mounted on FR5 Board, 25mm x 25mm x 1.57mm.

Thermal Characteristics

Package ID

(continuous)†

ID

(pulsed)

Power Dissipation

@TA = 25OCIDR

†IDRM

TO-92 175mA 2.0A 1.0W 175mA 2.0A

TO-243AA (SOT-89) 260mA 1.8A 1.6W‡260mA 1.8A

Switching Waveforms and Test Circuit

90%

10%

90% 90%

10%

Pulse

Generator

VDD

R

L

OUTPUT

D.U.T.

t

(ON)

t

d(ON)

t

(OFF)

t

d(OFF)

t

r

INPUT

OUTPUT

10V

VDD

R

GEN

0V

t

f

3

Supertex inc.

www.supertex.com

Doc.# DSFP-TN2540

A062113

TN2540

Typical Performance Curves

ID (amperes)

VDS (volts)

Output Characteristics

0 10 20 30 40 50

2.0

1.6

1.2

0.8

0.4

0

Saturation Characteristics

ID (amperes)

VDS (volts)

5.0V

4.0V

3.0V

0246810

0.0

0.2

0.4

0.6

0.8

1.0

VGS = 10V

PD (watts)

Power Dissipation vs. Ambient Temperature

TA (OC)

0 25 50 75 100 125 150

2.0

1.0

0

TO-243AA

Thermal Resistance (normalized)

Thermal Response Characteristics

tp (seconds)

TO-243AA

PD = 1.6W

TC = 25OC

1.0

0.8

0.6

0.4

0.2

0

0.001 0.01 0.1 1.0 10

Maximum Rated Safe Operating Area

ID (amperes)

VDS (volts)

0.1 1.0 10 100

10

1.0

0.1

0.01

0.001

TO-243AA(DC)

TO-92(DC)

TO-243AA(pulsed)

TO-92(DC)

GFS (siemens)

ID (amperes)

Transconductance vs. Drain Current

0.0 0.2 0.4 0.6 1.0

0.0

0.2

0.4

0.6

0.8

1.0

VDS =15V

125

O

C

0.8

TA = -55OC

25OC

6.0V

8.0V

5V

4V

3V

8V

VGS = 10V

6V

4

Supertex inc.

www.supertex.com

Doc.# DSFP-TN2540

A062113

TN2540

Typical Performance Curves (cont.)

Gate Drive Dynamic Characteristics

Q

G (nanocoulombs)

VGS (volts)

Tj (OC)

VGS(th) (normalized)

RDS (normalized)

V

(th)

and R

DS

Variation with Temperature

On-Resistance vs. Drain Current

I

D (amperes)

RDS(ON) (ohms)

BV

DSS

Variation with Temperature

VDSS (normalized)

Tj (OC)

Transfer Characteristics

VGS (volts)

ID (amperes)

Capacitance vs. Drain-to-Source Voltage

200

150

100

50

0

C (picofarads)

VDS (volts)

0 10 20 30 40

0 2 4 6 8 10

1.5

1.2

0.9

0.6

0.3

0

-50 0 50 100 150

1.1

1.0

0.9

50

40

30

20

10

0

1.4

1.2

1.0

0.8

0.6

2.5

2.0

1.5

1.0

0.5

0

10

8

6

4

2

00 0.4 0.8 1.2 1.6 2.0

V

DS

= 40V

V

DS

= 10V

95pF

VGS = 4.5V

VGS = 10V

T

A

= -55

O

C

VDS = 25OC

25

O

C

0 0.4 0.8 1.2 1.6 2.0

f = 1MHz

CISS

C

OSS

C

RSS

260pF

V(th) @ 1mA

RDS(ON) @ 10V, 0.5A

125

O

C

-50 0 50 100 150

5

Supertex inc.

www.supertex.com

Doc.# DSFP-TN2540

A062113

TN2540

3-Lead TO-92 Package Outline (N3)

Symbol A b c D E E1 e e1 L

Dimensions

(inches)

MIN .170 .014†.014†.175 .125 .080 .095 .045 .500

NOM - - - - - - - - -

MAX .210 .022†.022†.205 .165 .105 .105 .055 .610*

JEDEC Registration TO-92.

* This dimension is not specied in the JEDEC drawing.

† This dimension differs from the JEDEC drawing.

Drawings not to scale.

Supertex Doc.#: DSPD-3TO92N3, Version E041009.

Seating

Plane

1

2

3

Front View Side View

Bottom View

E1 E

D

e1

L

e

c

1 2 3

b

A

Supertex inc. does not recommend the use of its products in life support applications, and will not knowingly sell them for use in such applications unless it receives

an adequate “product liability indemnification insurance agreement.” Supertex inc. does not assume responsibility for use of devices described, and limits its liability

to the replacement of the devices determined defective due to workmanship. No responsibility is assumed for possible omissions and inaccuracies. Circuitry and

specifications are subject to change without notice. For the latest product specifications refer to the Supertex inc. (website: http//www.supertex.com)

1235 Bordeaux Drive, Sunnyvale, CA 94089

Tel: 408-222-8888

www.supertex.com

6

TN2540

(The package drawing(s) in this data sheet may not reect the most current specications. For the latest package outline

information go to http://www.supertex.com/packaging.html.)

Doc.# DSFP-TN2540

A062113

3-Lead TO-243AA (SOT-89) Package Outline (N8)

Symbol A b b1 C D D1 E E1 e e1 H L

Dimensions

(mm)

MIN 1.40 0.44 0.36 0.35 4.40 1.62 2.29 2.00†

1.50

BSC

3.00

BSC

3.94 0.73†

NOM-------- --

MAX 1.60 0.56 0.48 0.44 4.60 1.83 2.60 2.29 4.25 1.20

JEDEC Registration TO-243, Variation AA, Issue C, July 1986.

† This dimension differs from the JEDEC drawing

Drawings not to scale.

Supertex Doc. #: DSPD-3TO243AAN8, Version F111010.

b b1

D

D1

E H E1

C

A

1 2 3

e

e1

Top View Side View

L