12/13/01W
GENERAL DATA
Life Expectancy Minimum operations
Mechanical 10 million operations
Electrical Standard Duty: 5 x 105at 1 A, 30 VDC Res.
4 x 105at 0.5 A, 120 VAC Res.
Heavy Duty: 2 x 105at 2 A, 30 VDC Res.
2 x 105at 1 A, 120 VAC Res.
Operate Time (typical) Standard: 3 ms at nominal coil voltage
Sensitive: 5 ms at nominal coil voltage
Release Time (typical) 1 ms at nominal coil voltage
(with no coil suppression)
Capacitance Coil to contact: 3.0 pF
Contact to contact: 3.0 pF
Bounce (typical) At 10 mA contact current
2 ms at operate
8 ms at release
Dielectric Strength 1250 Vrms coil to contact
(at sea level for 1 min.) 500 Vrms between open contacts
Meets FCC Part 68.302 1500 V lightning surge
Meets FCC Part 68.304 1000 V dielectric
Insulation 100 megohms min. at 20°C, 500 VDC,
Resistance 50% RH
Dropout Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating Standard: -25°C (-13°F) to 60°C (140°F)
Sensitive: -25°C (-13°F) to 75°C (167°F)
Storage Both: -25°C (-13°F) to 105°C (221°F)
Vibration 0.062" DA at 10–55 Hz
Shock Standard: 10 g
Sensitive: 6 g
Enclosure P.B.T. polyester
Terminals Tinned copper alloy
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Immersion Time 30 seconds
Weight 3.5 grams
AZ5
SUBMINIATURE
PC BOARD RELAY
FEATURES
•Subminiature size for high density packaging
•Coil sensitivity to 100 mW
•Extremely low cost
•Coils to 24 VDC
•Epoxy sealed for automatic wave soldering
•1 Amp and 2 Amp contacts
•Life expectancy to 10 million operations
•Meets FCC Part 68.302 1500 V lightning surge
•Meets FCC Part 68.304 1000 V dielectric
•UL file E43203; CSA file 74120
CONTACTS
Arrangement SPDT (1 Form C)
Welded crossbar construction
Ratings Resistive load:
Light Duty Max. switched power: 30 W or 60 VA
Max. switched current: 1 A
Max. switched voltage: 150 VDC or 300 VAC
UL Rating: 1 A at 30 VDC
0.5 A at 120 VAC
Heavy Duty Max. switched power: 60 W or 120 VA
Max. switched current: 2 A
Max. switched voltage: 150 VDC or 300 VAC
UL Rating: 2 A at 30 VDC
1 A at 120 VAC
Material
Light Duty Silver palladium, gold clad
Heavy Duty Silver nickel
Resistance < 50 milliohms initially
COIL
Power
At Pickup Voltage Standard coil: 220 mW
(typical) Sensitive coil: 100 mW
Max. Continuous 1.1 W at 20°C (68°F) ambient
Dissipation .8 W at 40°C (104°F) ambient
Temperature Rise Standard: 40°C (72°F) at nominal
coil voltage
Sensitive: 22°C (40°F) at nominal voltage
Temperature Max. 105°C (221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Other coil resistances and sensitivities available upon request.
4. Specifications subject to change without notice.