ULTRAFAST WIDEBAND HIGH-FREQUENCY LOGARITHMIC AMPLIFIERS
MODEL: MLIF SERIES
FFEEAATTUURREESS
• 70 dB dynamic range at 1 GHz
• Improved sensitivity
• Rise time up to 1 ns
• Fast recovery time
• ±1.5 dB video flatness over 500 MHz bandwidth
• Low output noise for increased accuracy
• Improved sensitivity through low noise
figure input stages
OPTIONS
• Customized center frequencies and
frequency agility
• Dynamic range and operational bandwidth
• Custom packaging
• Extended environmental limits
• Military screening available
MLIF-500/100-70 500 100 -70 to 0 -73 1 5 15 25
MLIF-750/500-65 750 500 -65 to 0 -68 1.5 3 10 15
MLIF-900/100-75 900 100 -70 to +5 -73 1 10 30 45
MLIF-1000/500-60 1000 500 -60 to 0 -63 1 3 10 15
MLIF-1000/500-75 1000 500 -70 to +5 -73 2 10 30 45
MLIF-1500/500-60 1500 500 -60 to 0 -63 1.5 3 10 15
MLIF-1800/200-70 1800 200 -65 to +5 -68 1 10 30 45
CENTER OPERATIONAL DYNAMIC TANGENTIAL VIDEO RISE FALL RECOVERY
MODEL FREQUENCY BANDWIDTH RANGE SENSITIVITY FLATNESS TIME TIME TIME
NUMBER (MHz) (MHz) (dBm) (dBm) (±dB) (ns) (ns) (ns)
ADDITIONAL SPECIFICATIONS
The above models are available in 'A, B, G, K and M' housings.
Linearity measured at center frequency and 25°C is ±1 dB.
Add ±0.5 dB over operating temperature of -40 to +85°C and ±0.5 dB over operating bandwidth.
Slope is 15 mV/dB at center frequency and 25°C.
Slope variations of ±5% will occur over operating temperature of -40 to +85°C.
An additional ±5% variation will occur over operating bandwidth.
Video output is DC coupled and rated into 93 Ω.
DC offset drift over operating temperature of -40 to +85°C is ±50 mV typical.
Input impedance is 50 Ω(VSWR < 1.5:1 typical).
Improved second-harmonic rejection on limited IF out.
Power: +12 VDC at 400 mA typical, -12 VDC at 75 mA typical.
ORDER OPTIONS
For ±15 VDC, add suffix “C”.
For limited IF output at 0 dBm nominal, (VSWR < 2.0:1 typical) add suffix “L”.
Typical part number: MLIF-1000/500-75BCL (for 'B' housing at ±15 VDC with limited IF output).
100 Davids Drive, Hauppauge, NY 11788 • TEL: (631) 439-9220 • FAX: (631) 436-7430 • www.miteq.com
C-17B/7 08-14-07
NOTE: FOR MODIFICATION OF OUR STANDARD MODELS, PLEASE CONSULT FACTORY.
MLIF SERIES TYPICAL TEST DATA
LOG LINEARITY
(MLIF-1000/500-70)
PULSE RESPONSE
(MLIF-1000/300-60)
OUTLINE A
MLIF SERIES OUTLINE DRAWINGS
100 Davids Drive, Hauppauge, NY 11788 • TEL: (631) 439-9220 • FAX: (631) 436-7430 • www.miteq.com
C-17B/8 08-14-07
NOTE: DIMENSIONS SHOWN IN BRACKETS [ ] ARE IN MILLIMETERS.
MLIF SERIES OUTLINE DRAWINGS
OUTLINE B
OUTLINE G*
100 Davids Drive, Hauppauge, NY 11788 • TEL: (631) 439-9220 • FAX: (631) 436-7430 • www.miteq.com
C-17B/9 08-14-07
NOTE: DIMENSIONS SHOWN IN BRACKETS [ ] ARE IN MILLIMETERS.
*ABOVE DRAWING INCLUDES LIMITED IF OUTPUT (OPTIONAL).
MLIF SERIES OUTLINE DRAWINGS
OUTLINE K*
OUTLINE M
100 Davids Drive, Hauppauge, NY 11788 • TEL: (631) 439-9220 • FAX: (631) 436-7430 • www.miteq.com
C-17B/10 08-14-07
NOTE: DIMENSIONS SHOWN IN BRACKETS [ ] ARE IN MILLIMETERS.
*ABOVE DRAWING INCLUDES LIMITED IF OUTPUT (OPTIONAL).
