HMC574MS8 / 574MS8E v02.0308 GaAs MMIC 5 WATT T/R SWITCH DC - 3 GHz Typical Applications Features The HMC574MS8 / HMC574MS8E is ideal for: Low Insertion Loss: 0.3 dB * Cellular/3G Infrastructure High Third Order Intercept: +65 dBm * Private Mobile Radio Handsets Isolation: 30 dB * WLAN, WiMAX & WiBro Single Positive Supply: +3 to +8V * Automotive Telematics SMT Package: MSOP8 * Test Equipment Included in the HMC-DK005 Designer's Kit Functional Diagram General Description The HMC574MS8 & HMC574MS8E are low-cost SPDT switches in 8-lead MSOP packages for use in transmit/receive applications which require very low distortion at high incident power levels. The device can control signals from DC to 3 GHz and is especially suited for Cellular/3G infrastructure, WiMAX and WiBro applications with only 0.3 dB typical insertion loss. The design provides 5 watt power handling performance and +65 dBm third order intercept at +8 Volt bias. RF1 and RF2 are reflective shorts when "Off". SWITCHES - SMT 10 Electrical Specifi cations, TA = +25 C, Vctl = 0/+5 Vdc, Vdd = +5 Vdc (Unless Otherwise Stated), 50 Ohm System Parameter Frequency Insertion Loss Isolation Return Loss Input Power for 1dB Compression Input Third Order Intercept (Two-tone Input Power = +27 dBm Each Tone) Vctl = 0/+3V Vctl = 0/+5V Vctl = 0/+8V Vctl = 0/+3V Vctl = 0/+5V Vctl = 0/+8V Switching Characteristics 26 24 21 16 0.5 - 3.0 GHz 33 35 37 0.5 - 3.0 GHz Typ. Max. Units 0.25 0.3 0.4 0.5 30 28 25 20 35 25 18 16 36 38 39 55 63 65 0.5 0.6 0.7 0.8 dB dB dB dB dB dB dB dB dB dB dB dB dBm dBm dBm dBm dBm dBm DC - 3.0 GHz tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 10 - 350 Min. DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 3.0 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 3.0 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 3.0 GHz 80 120 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com ns ns HMC574MS8 / 574MS8E v02.0308 GaAs MMIC 5 WATT T/R SWITCH DC - 3 GHz Isolation Between RFC & RF1/RF2 0 0 -0.5 -10 ISOLATION (dB) -1 +25C +85C -40C -1.5 +25C +85C -40C -20 -30 -2 -40 0 1 2 3 4 0 1 FREQUENCY (GHz) 0 4 10 0 RETURN LOSS (dB) RF1 ON RF2 ON -10 ISOLATION (dB) 3 Return Loss RF1 to RF2 Isolation -20 -30 -40 -50 +25C +85C -40C -10 -20 -30 -40 0 1 2 3 4 0 1 FREQUENCY (GHz) 2 3 4 3 4 FREQUENCY (GHz) Input P1dB vs. Vdd Input P0.1dB vs. Vdd 42 42 40 40 38 38 P1dB (dBm) P0.1dB (dBm) 2 FREQUENCY (GHz) SWITCHES - SMT INSERTION LOSS (dB) Insertion Loss 36 34 32 30 34 32 +8V +5V +3V 30 +8V +5V +3V 28 36 28 26 26 0 1 2 FREQUENCY (GHz) 3 4 0 1 2 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 351 HMC574MS8 / 574MS8E v02.0308 GaAs MMIC 5 WATT T/R SWITCH DC - 3 GHz Input IP3 vs. Input Power @ 1900 MHz 70 70 65 65 IP3 (dBm) IP3 (dBm) Input IP3 vs. Input Power @ 900 MHz 60 +8V 55 +5V +8V 55 +5V 50 50 45 45 27 28 29 30 31 32 33 27 TWO TONE INPUT POWER (dBm) (EACH TONE) 10 70 30 31 32 60 55 +8V +5V -20 -0.4 -40 -0.6 -60 -0.8 +3V 45 -0.2 INSERTION LOSS (dB) 65 50 40 -80 F2 F3 -100 -1 0 1 2 3 4 24 26 -0.6 -60 F2 F3 -80 -100 -1 34 INPUT POWER (dBm) 36 36 38 0 -0.2 -20 -0.4 -40 -0.6 -60 INSERTION LOSS (dB) -40 INSERTION LOSS (dB) -0.4 32 34 -0.8 F2 F3 HARMONICS (dBc) -20 30 32 0 HARMONICS (dBc) -0.2 28 30 2nd & 3rd Harmonics @ 900 MHz Vdd = +8 Volts 0 0 26 28 INPUT POWER (dBm) 2nd & 3rd Harmonics @ 900 MHz Vdd = +5 Volts -0.8 33 0 0 FREQUENCY (GHz) 10 - 352 29 2nd & 3rd Harmonics @ 900 MHz Vdd = +3 Volts Input Third Order Intercept IP3 (dBm) 28 TWO TONE INPUT POWER (dBm) (EACH TONE) HARMONICS (dBc) SWITCHES - SMT 60 -80 -100 -1 28 30 32 34 36 38 INPUT POWER (dBm) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 40 HMC574MS8 / 574MS8E v02.0308 GaAs MMIC 5 WATT T/R SWITCH DC - 3 GHz Input P1dB vs. Vdd 40 40 35 35 P1dB (dBm) 30 +8V +5V +3V 25 20 0.01 0.1 +8V +5V +3V 30 25 1 20 0.01 0.1 FREQUENCY (GHz) Absolute Maximum Ratings Max. Input Power Vdd = 0/+8V 0.5 - 2.5 GHz 1 FREQUENCY (GHz) 10 Bias Voltage & Current 39 dBm Vdd (Vdc) Typical Idd (A) +3 2 Bias Voltage Range (Vdd) -0.2 to +10 Vdc Control Voltage Range (A & B) -0.2 to +Vdd Vdc Hot Switching Power Level Vdd = +8V 39 dBm Channel Temperature 150 C Continuous Pdiss ( T= + 85 C) (derate 10 mW/C above 85 C) 0.65W Thermal Resistance 100 C/W Low 0 to +0.2 Vdc @ 10 A Typical Storage Temperature -65 to +150 C High Vdd 0.2 Vdc @ 10 A Typical Operating Temperature -40 to +85 C ESD Sensitivity (HBM) Class 1A DC Blocks are required at ports RFC, RF1 and RF2 +5 10 +8 40 Control Voltages State Bias Condition Truth Table Control Input (Vctl) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS SWITCHES - SMT P0.1dB (dBm) Input P0.1dB vs. Vdd Signal Path State A B RFC to RF1 RFC to RF2 High Low Off On Low High On Off For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 353 HMC574MS8 / 574MS8E v02.0308 GaAs MMIC 5 WATT T/R SWITCH DC - 3 GHz Outline Drawing SWITCHES - SMT 10 NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC574MS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC574MS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H574 XXXX [2] H574 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX 10 - 354 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC574MS8 / 574MS8E v02.0308 GaAs MMIC 5 WATT T/R SWITCH DC - 3 GHz Pin Descriptions Pin Number Function Description 1 A See truth table and control voltage table. 2 B See truth table and control voltage table. 3, 5, 8 RFC, RF1, RF2 This pin is DC coupled and matched to 50 Ohm. Blocking capacitors are required. 4 Vdd Supply Voltage. 6, 7 GND This pin must be connected to RF/DC ground. Interface Schematic Typical Application Circuit SWITCHES - SMT 10 Notes: 1. Set logic gate and switch Vdd = +3V to +5V and use HCT series logic to provide a TTL driver interface. 2. Control inputs A/B can be driven directly with CMOS logic (HC) with Vdd of +3 to +8 Volts applied to the CMOS logic gates and to pin 4 of the RF switch. 3. DC Blocking capacitors are required for each RF port as shown. Capacitor value determines lowest frequency of operation. 4. Highest RF signal power capability is achieved with Vdd set to +8V. The switch will operate properly (but at lower RF power capability) at bias voltages down to +3V. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 355 HMC574MS8 / 574MS8E v02.0308 GaAs MMIC 5 WATT T/R SWITCH DC - 3 GHz Evaluation Circuit Board SWITCHES - SMT 10 List of Materials for Evaluation PCB 104124 [1] Item Description J1 - J3 PCB Mount SMA RF Connector J4 - J7 DC Pin C1 - C3 100 pF capacitor, 0402 Pkg. C4 10,000 pF capacitor, 0603 Pkg. R1, R2 100 Ohm resistor, 0402 Pkg. U1 HMC574MS8 / HMC574MS8E T/R Switch PCB [2] 104122 Evaluation PCB The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and package bottom should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 10 - 356 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC574MS8 / 574MS8E v02.0308 GaAs MMIC 5 WATT T/R SWITCH DC - 3 GHz Notes: SWITCHES - SMT 10 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 357