261
Revised: November 1, 2010 05:04 PM
©2010 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
15 and 16 Amp Standard SCRs
Sxx15x & Sxx16x Series
Sxx15x & Sxx16x Series
Description
Excellent unidirectional switches for phase control
applications such as heating and motor speed controls.
Standard phase control SCRs are triggered with few
milliamperes of current at less than 1.5V potential.
Features & Benefits
RoHS compliant
Glass – passivated
junctions
Voltage capability up
to 1000 V
Surge capability up to
225 A
Main Features
Symbol Value Unit
IT(RMS) 15 & 16 A
VDRM /VRRM 400 to 1000 V
IGT 30 mA
Schematic Symbol
Agency Approval
Agency Agency File Number
®L Package: E71639
Absolute Maximum Ratings — Standard SCRs
Symbol Parameter Test Conditions Value Unit
IT(RMS) RMS on-state current
Sxx15L TC = 90°C 15
A
Sxx16R
Sxx16N TC = 110°C 16
IT(AV) Average on-state current
Sxx15L TC = 90°C 9.5
A
Sxx16R
Sxx16N TC = 110°C 10.0
ITSM Peak non-repetitive surge current
single half cycle; f = 50Hz;
TJ (initial) = 25°C 188
A
single half cycle; f = 60Hz;
TJ (initial) = 25°C 225
I2t I2t Value for fusing tp = 8.3 ms 210 A2s
di/dt Critical rate of rise of on-state current f = 60 Hz ; TJ = 125°C 125 A/μs
IGM Peak gate current TJ = 125°C 3 A
PG(AV) Average gate power dissipation TJ = 125°C 0.6 W
Tstg Storage temperature range -40 to 150 °C
TJOperating junction temperature range -40 to 125 °C
Note: xx = voltage
Applications
Typical applications are capacitive discharge systems for
strobe lights, nailers, staplers and gas engine ignition. Also
controls for power tools, home/brown goods and white
goods appliances.
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
AK
G
®
262
Revised: November 1, 2010 05:04 PM
©2010 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
15 and 16 Amp Standard SCRs
Sxx15x & Sxx16x Series
Electrical Characteristics (TJ = 25°C, unless otherwise specified)
Symbol Test Conditions
Value
Unit
Sxx15x
Sxx16x
IGT VD = 12V; RL = 60 Ω
MAX. 30
mA
MIN. 1
VGT MAX. 1. 5 V
dv/dt
VD = VDRM; gate open; TJ = 100°C
400V
MIN.
450
V/μs
600V
425
800V
400
1000V
200
VD = VDRM; gate open; TJ = 125°C
400V
350
600V
325
800V
300
VGD VD = VDRM RL = 3.3 kΩ TJ = 110°C MIN. 0.2 V
IHIT = 200mA (initial) MAX. 40 mA
tqIT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs MAX. 35 μs
tgt IG = 2 x IGT PW = 15µs IT = 12A TYP. 2 μs
Note: xx = voltage, x = package
(1) IT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs
Static Characteristics
Symbol Test Conditions Value Unit
VTM
15A Device IT = 30A; tp = 380 µs
MAX. 1. 6 V
16A Device IT = 32A; tp = 380 µs
IDRM / IRRM VDRM = VRRM
TJ = 25°C
400 - 600V
MAX.
10
μA
800 - 1000V 20
TJ = 100°C
400 - 600V 500
800V 1000
1000V 3000
TJ = 125°C
400 - 600V 1000
800V 2000
Thermal Resistances
Symbol Parameter Value Unit
Rθ(J-C) Junction to case (AC)
Sxx16R/ Sxx16N 1. 1
°C/W
Sxx15L 2.5
Rθ(J-A) Junction to ambient
Sxx16R 40
°C/W
Sxx15L 50
Note: xx = voltage
263
Revised: November 1, 2010 05:04 PM
©2010 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
15 and 16 Amp Standard SCRs
Sxx15x & Sxx16x Series
Figure 1: Normalized DC Gate Trigger Current
vs. Junction Temperature
Figure 2: Normalized DC Gate Trigger Voltage
vs. Junction Temperature
125
0.0
0.5
1.0
1.5
2.0
-40 -1510356085110
Junction Temperature (TJ) -- (ºC)
Ratio of IGT / IGT (TJ = 25°C)
Figure 5: Power Dissipation (Typical)
vs. RMS On-State Current
Figure 6: Maximum Allowable Case Temperature
vs. RMS On-State Current
Figure 3: Normalized DC Holding Current
vs. Junction Temperature
Figure 4: On-State Current vs. On-State
Voltage (Typical)
0.0
0.5
1.0
1.5
2.0
-40 -1510356085110
Junction Temperature (TJ) -- (°C)
Ratio of VGT / VGT (TJ = 25ºC)
125
125
0.0
0.5
1.0
1.5
2.0
-40 -1510356085110
Junction Temperature (TJ) -- (°C)
Ratio of IH / IH (TJ = 25°C)
0
10
20
30
40
50
60
0.70.8 0.91.0 1.11.2 1.31.4 1.51.6
Instantaneous On-state Voltage (vT) Volts
Instantaneous On-state Current (iT) Amps
0
2
4
6
8
10
12
14
0246810 12 14 16
RMS On-State Current [I T(RMS) ] - (Amps)
Average On-State Power Dissipation
[P
D(AV)
] - (Watts)
80
85
90
95
100
105
110
115
120
125
130
024681012141
61
8
Sxx16R
Sxx16N
Sxx15L
RMS On-State Current [IT(RMS)] - Amps
Maximum Allowable Case
Temperature (TC ) - °C
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
264
Revised: November 1, 2010 05:04 PM
©2010 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
15 and 16 Amp Standard SCRs
Sxx15x & Sxx16x Series
Figure 7: Maximum Allowable Case Temperature
vs. Average On-State Current
Figure 8: Maximum Allowable Ambient Temperature
vs. RMS On-State Current
Figure 9: Maximum Allowable Ambient Temperature vs. Average On-State Current
Note: xx = voltage
80
85
90
95
100
105
110
11 5
120
125
130
012345678910 11
Sxx15L
Sxx16R
Sxx16N
Average On-State Current [IT(AVE) ] - Amps
Maximum Allowable Case
Te mperature (TC)- °C
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
0.0
0.2
0.4
0.6
0.8
1.0
1.2
0255075100 12
51
50
Normalized Peak Current
Case Te mperature (TC ) - °C
0
20
40
60
80
100
120
0.00.5 1.
01
.5
Sxx16R
Sxx16N
Sxx15L
Average On-State Current [IT(AVE)] - Amps
Maximum Allowable Ambient
Temperature (T
A
) - °C
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
Figure 10: Peak Capacitor Discharge Current Figure 11: Peak Capacitor Discharge Current Derating
10
100
1000
0.5 1.
01
0.0 50.0
Pulse Current Duration (tw) - ms
Peak Discharge Current (ITM) - Amps
ITRM
tW
0.0
0.2
0.4
0.6
0.8
1.0
1.2
0255075100 12
51
50
Normalized Peak Current
Case Te mperature (TC ) - °C
265
Revised: November 1, 2010 05:04 PM
©2010 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
15 and 16 Amp Standard SCRs
Sxx15x & Sxx16x Series
10
100
1000
110100 1000
Sxx16R
Sxx16N
Sxx15L
Peak Surge (Non-repetitive)
On-state Current (I TSM) – Amps
Surge Current Duration -- Full Cycles
Figure 12: Surge Peak On-State Current vs. Number of Cycles
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
Soldering Parameters
Reflow Condition Pb – Free assembly
Pre Heat
- Temperature Min (Ts(min))150°C
- Temperature Max (Ts(max))200°C
- Time (min to max) (ts)60 – 180 secs
Average ramp up rate (Liquidus Temp)
(TL) to peak 5°C/second max
TS(max) to TL - Ramp-up Rate 5°C/second max
Reflow - Temperature (TL) (Liquidus) 217°C
- Temperature (tL)60 – 150 seconds
Peak Temperature (TP)260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)20 – 40 seconds
Ramp-down Rate 5°C/second max
Time 25°C to peak Temperature (TP)8 minutes Max.
Do not exceed 280°C
Time
Temperature
TP
TL
TS(max)
TS(min)
25
tP
tL
tS
time to peak temperature
Preheat
P
r
e
h
eat
Ramp-upRamp-up
Ramp-down
R
am
p
-
do
266
Revised: November 1, 2010 05:04 PM
©2010 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
15 and 16 Amp Standard SCRs
Sxx15x & Sxx16x Series
Physical Specifications Environmental Specifications
Test Specifications and Conditions
AC Blocking MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
Temperature Cycling
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell-time
Temperature/
Humidity
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
High Temp Storage MIL-STD-750, M-1031,
1008 hours; 150°C
Low-Temp Storage 1008 hours; -40°C
Thermal Shock
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwell-
time at each temperature; 10 sec (max)
transfer time between temperature
Autoclave
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
100% R/H
Resistance to
Solder Heat MIL-STD-750 Method 2031
Solderability ANSI/J-STD-002, category 3, Test A
Lead Bend MIL-STD-750, M-2036 Cond E
Terminal Finish 100% Matte Tin-plated
Body Material UL recognized epoxy meeting ammability
classification 94V-0
Lead Material Copper Alloy
Design Considerations
Careful selection of the correct device for the applications
operating parameters and environment will go a long way
toward extending the operating life of the Thyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead
Dimension Inches Millimeters
Min Max Min Max
A 0.380 0.420 9.65 10.67
B 0.105 0.115 2.67 2.92
C 0.230 0.250 5.84 6.35
D 0.590 0.620 14.99 15.75
E 0.142 0.147 3.61 3.73
F 0.110 0.130 2.79 3.30
G0.540 0.575 13.72 14.61
H0.025 0.035 0.64 0.89
J 0.195 0.205 4.95 5.21
K 0.095 0.105 2.41 2.67
L 0.060 0.075 1.52 1.91
M 0.085 0.095 2.16 2.41
N 0.018 0.024 0.46 0.61
O 0.178 0.188 4.52 4.78
P 0.045 0.060 1. 1 4 1.52
R 0.038 0.048 0.97 1.22
K
J
A
H
G
B
F
E
C
D
L
R
T
C
MEASURING POINT
ANODE
O
P
N
M
.276
7. 01
.526
13.36
.320
8.13
AREA (REF.) 0.17 IN
2
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
GATECATHODE ANODE
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
267
Revised: November 1, 2010 05:04 PM
©2010 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
15 and 16 Amp Standard SCRs
Sxx15x & Sxx16x Series
Dimensions — TO- 263AA (N-package) — D2-Pak Surface Mount
G
B
A
W
D
F
V
S
CATHODE
ANODE
T
C
MEASURING POINT
C
E
K
H
J
U
.320
8.13
.276
7. 01
.331
8.41
GATE
.460
11.68
.665
16.89
.260
6.60
.150
3.81
.080
2.03
.085
2.16
.055
1.40
.350
8.89
.276
7. 01
.276
7. 01
AREA: 0.11 in 2
Dimension Inches Millimeters
Min Max Min Max
A 0.360 0.370 9.14 9.40
B 0.380 0.420 9.65 10.67
C 0.178 0.188 4.52 4.78
D 0.025 0.035 0.64 0.89
E 0.045 0.060 1. 1 4 1.52
F 0.060 0.075 1.52 1.91
G0.095 0.105 2.41 2.67
H0.092 0.102 2.34 2.59
J 0.018 0.024 0.46 0.61
K 0.090 0.110 2.29 2.79
S 0.590 0.625 14.99 15.88
V 0.035 0.045 0.89 1. 14
U 0.002 0.010 0.05 0.25
W 0.040 0.070 1.02 1.78
Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab
Dimension Inches Millimeters
Min Max Min Max
A 0.380 0.420 9.65 10.67
B 0.105 0.115 2.67 2.92
C 0.230 0.250 5.84 6.35
D 0.590 0.620 14.99 15.75
E 0.142 0.147 3.61 3.73
F 0.110 0.130 2.79 3.30
G0.540 0.575 13.72 14.61
H0.025 0.035 0.64 0.89
J 0.195 0.205 4.95 5.21
K 0.095 0.105 2.41 2.67
L 0.060 0.075 1.52 1.91
M 0.085 0.095 2.16 2.41
N 0.018 0.024 0.46 0.61
O 0.178 0.188 4.52 4.78
P 0.045 0.060 1. 1 4 1.52
R 0.038 0.048 0.97 1.22
A
H
G
B
F
E
C
D
L
R
T
C
MEASURING POINT AREA (REF.) 0.17 IN
2
O
P
N
M
.320
8.13
.526
13.36
.276
7. 01
K
J
GATECATHODE ANODE
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
268
Revised: November 1, 2010 05:04 PM
©2010 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
15 and 16 Amp Standard SCRs
Sxx15x & Sxx16x Series
Product Selector
Part Number Voltage Gate Sensitivity Type Package
400V 600V 800V 1000V
Sxx15L X X X X 30mA Standard SCR TO-220L
Sxx16R X X X X 30mA Standard SCR TO-220R
Sxx16N X X X X 30mA Standard SCR TO-263
Note: xx = Voltage
Packing Options
Part Number Marking Weight Packing Mode Base Quantity
Sxx15L Sxx15L 2.2 g Bulk 500
Sxx15LTP Sxx15L 2.2 g Tube 500 (50 per tube)
Sxx16R Sxx16R 2.2 g Bulk 500
Sxx16RTP Sxx16R 2.2 g Tube 500 (50 per tube)
Sxx16NTP Sxx16N 1.6 g Tube 500 (50 per tube)
Sxx16NRP Sxx16N 1.6 g Embossed Carrier 500
Note: xx = Voltage
Gate
Cathode
Anode
0.512 (13.0)
Arbor Hole
Diameter
0.945
(24.0)
0.63
(16.0)
1.01
(25.7)
12.99
(330.0)
0.827
(21.0)
0.157
(4.0)
Direction of Feed
Dimensions
are in inches
(and millimeters).
*
*Cover tape
0.059
DIA
(1.5)
TO-263 Embossed Carrier Reel Pack (RP) Specs
Meets all EIA-481-2 Standards
Part Numbering System
Part Marking System
S60 16 R56
DEVICE TYPE
S: SCR
VOLTAGE RATING
40: 400V
60: 600V
80: 800V
K0: 1000V
CURRENT RATING
15: 15A
16: 16A
SENSITIVITY & TYPE
(blank): 30mA
PACKAGE TYPE
L: TO-220 Isolated
R: TO-220 Non-Isolated
N: TO-263 (D2-Pak)
LEAD FORM DIMENSIONS
xx: Lead Form Option
®
®
MY
MY
Sxx16R Sxx16L