T-1 (3mm) RIGHT ANGLE LED INDICATOR Part Number: WP130WDT/EYW High Efficiency Red Yellow Features Description z Pre-trimmed leads for pc board mounting. The High Efficiency Red source color devices are made with z 3 leads with common lead. Gallium Arsenide Phosphide on Gallium Phosphide Orange z Black case enhances contrast ratio. Light Emitting Diode. z Housing UL rating:94V-0. The Yellow source color devices are made with Gallium z Housing material: type 66 nylon. Arsenide Phosphide on Gallium Phosphide Yellow Light z RoHS compliant. Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAF1867 REV NO: V.3 DATE: APR/06/2011 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1102000194 Selection Guide Part No. Dice Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 12 30 10 20 High Efficiency Red (GaAsP/GaP) WP130WDT/EYW Viewing Angle [1] 21/2 60 White Diffused Yellow (GaAsP/GaP) Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength High Efficiency Red Yellow D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 627 590 nm IF=20mA High Efficiency Red Yellow 625 588 nm IF=20mA Spectral Line Half-width High Efficiency Red Yellow 45 35 nm IF=20mA C Capacitance High Efficiency Red Yellow 15 20 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red Yellow 2 2.1 2.5 2.5 V IF=20mA IR Reverse Current High Efficiency Red Yellow 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Yellow Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating / Storage Temperature V -40C To +85C Lead Solder Temperature [2] 260C For 3 Seconds Lead Solder Temperature [3] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF1867 REV NO: V.3 DATE: APR/06/2011 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1102000194 WP130WDT/EYW High Efficiency Red SPEC NO: DSAF1867 REV NO: V.3 DATE: APR/06/2011 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1102000194 Yellow SPEC NO: DSAF1867 REV NO: V.3 DATE: APR/06/2011 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1102000194 PACKING & LABEL SPECIFICATIONS WP130WDT/EYW SPEC NO: DSAF1867 REV NO: V.3 DATE: APR/06/2011 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1102000194 SPEC NO: DSAF1867 REV NO: V.3 DATE: APR/06/2011 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1102000194