SR5200K Voltage 200 V 5.0 Amp Schottky Barrier Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of "-C" specifies halogen & lead-free FEATURES DO-27 Low forward voltage drop High current capability High reliability High surge current capability Epitaxial construction C A MECHANICAL DATA B Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Solderable per MIL-STD-202, method 208 guaranteed Polarity: As Marked Mounting position: Any Weight: 1.10 grams (approximately) D A REF. A B C D ESD Protection Diode 8KV Millimeter Min. Max. 25.4 (TYP) 7.20 9.53 5.00 5.60 1.20 1.32 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating 25C ambient temperature unless otherwise s pecified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) Parameter Symbol Rating Unit Maximum Recurrent Peak Reverse Voltage VRRM 200 V Working Peak Reverse Voltage VRWM 200 V Maximum DC Blocking Voltage VDC 200 V Maximum Average Forward Rectified Current (See Fig.1) IAV 5 A Peak Forward Surge Current, 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 120 A IF=5A, TF=25C Instantaneous Forward Voltage 0.92 VF IF=5A, TF=100C Maximum DC Reverse Current at Rated DC 3 Blocking Voltage Typical Junction Capacitance Typical Thermal Resistance TA=25C 2 Electrostatic Discharge Operating & Storage Temperature Note: 1. 2. 3. 0.05 IR TA=100C 1 V 0.76 mA 8 CJ 200 pF RJL 10 C / W VESD 8 kV TJ ,TSTG -50~150, -65~175 C Measured at 1 MHz and applied reverse voltage of 5.0V D.C Thermal Resistance Junction to Lead. Pulse test: 300uS pulse width, 1% duty cycle. http://www.SeCoSGmbH.com/ 26-May-2011 Rev. A Any changes of specification will not be informed individually. Page 1 of 2 SR5200K Elektronische Bauelemente Voltage 200 V 5.0 Amp Schottky Barrier Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 26-May-2011 Rev. A Any changes of specification will not be informed individually. Page 2 of 2