TaNFilm® Precision
Flat Pack Networks
8900 Series
Precisionabsoluteandraotolerancesavailable
QualiedtoMIL-PRF-83401/03,/10and/15
QualiedtocharacteriscsM,KandH
Customschemacsreadilyavailable
AbsoluteTCRto±15ppm/°C
Resistors
07.20
General Note
TT Electronics reserves the right to make changes in product specication without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronics.com/resistors
BI Technologies IRC Welwyn
TaNFilm® Precision
Flat Pack Networks
8900 Series
Precision absolute and rao tolerances available
Qualied to MIL-R-83401 /03, /10 and /15
Qualied to characteriscs M, K and H
Custom schemacs readily available
Absolute TCR to ±15ppm/°C
General Note
IRC reserves the right to make changes in product specifi cation without notice or liability.
All information is subject to IRC’s own data and is considered accurate at time of going to print. A subsidiary of
TT electronics plc
• 4222 South Staples Street • Corpus Christi Texas 78411 USA
© IRC Advanced Film Division
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
8900 Series
• Precision absolute and ratio tolerances available
• Qualifi ed to MIL-R-83401 /03, /10 and /15
• Qualifi ed to characteristics M, K and H
• Custom schematics readily available
• Absolute TCR to ±15ppm/°C
Schematic
Resistance
Range
(Ω)
Absolute
Tolerance
Optional
Ratio
Tolerance
Absolute TCR
(ppm/°C)
Tracking
TCR
(ppm/°C)
Element
Power
(mW)
A
10 - 49.9 F, G, J F, G ±50; ±100; ±300 ±20
50
50.0 - 199 F, G, J D, F, G ±25; ±50; ±100; ±300 ±10
200 - 999 B, D, F, G, J A, B, D, F, G ±25; ±50; ±100; ±300 ±5
1.0K - 100K B, D, F, G, J T, Q, A, B, D, F, G ±15; ±25; ±50; ±100; ±300 ±5
101K - 200K B, D, F, G, J A, B, D, F, G ±25; ±50; ±100; ±300 ±5
B
50 - 149 B, D, F, G, J B, D, F, G ±300; ±100 ±50
25
150 - 499 B, D, F, G, J B, D, F, G ±300; ±100; ±50 ±20
500 - 999 B, D, F, G, J B, D, F, G ±25; ±50; ±100; ±300 ±5
1.0K - 150K B, D, F, G, J B, D, F, G ±15; ±25; ±50; ±100; ±300 ±5
TaNFilm® Precision
Flat Pack Networks
TaNFilm® resistor networks are designed for use in applications requiring a high degree of reliability, stability, tight
tolerance and TCR tracking, and low noise. The sputtering process for resistor formation has been perfected to allow a
continuous feed production line under high vacuum conditions, thus, insuring uniformity of properties between networks.
Laser trimming makes tight ratios easily achievable. The gold plated copper leads are solid phase welded to a large
area of gold conductor pads on the ceramic substrate assuring the most reliable termination and long term stability.
The Tantalum Nitride resistor material is passivated for environmental protection insuring excellent performance far
superior to military requirements.
Our TaNFilm® process enables us to manufacture networks containing different resistance values and still maintain tight
tolerances and tracking characteristics. The nature of our photo-etch process makes it readily adaptable to meet each
individual customer’s needs. Custom circuit designs and special mechanical confi gurations can be easily achieved
with a modest set up charge while maintaining our high standards of precision and reliability.
Electrical Data
8900 Series Issue September 2009 Sheet 1 of 4
Make Possible
Resistors
07.14
General Note
TT Electronics reserves the right to make changes in product specication without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronicsresistors.com
All Pb-free parts comply with EU Direcve 2011/65/EU (RoHS2)
All Pb-free parts comply with EU Direcve 2011/65/EU amended by (EU) 2015/863 (RoHS3)All Pb-free parts comply with EU Direcve 2011/65/EU amended by (EU) 2015/863 (RoHS3)
TaNFilm® Precision
Flat Pack Networks
8900 Series
07.20
General Note
TT Electronics reserves the right to make changes in product specication without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronics.com/resistors
BI Technologies IRC Welwyn
TaNFilm® Precision
Flat Pack Networks
8900 Series
• 4222 South Staples Street • Corpus Christi Texas 78411 USA
© IRC Advanced Film Division
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
Schematic Data
R1
R1
1234 5 6 7
891011121314
1234 5 6 7
891011121314
Model 8989
RZ 030, RZ 150
Schematic A
Model 8987
RZ 030, RZ 150
Schematic B
R1
R1
1 2 3 4 5 6 7 8
91011121314
1 2 3 4 5 6 7 8
Model 8999
RZ 100
Schematic A
Model 8998
RZ 100
Schematic B
1516 16 15
Schematic
Package
Power (mW) Power Derating Voltage
Rating
Temperature
Range Substrate Lead Finish Noise
14-pin 16-pin
100% from 0°C
to 70°C derated
linearly to 0%
at 125°C
PxR
not to
exceed 50V
-65°C to +125°C 99.6%
Alumina
Gold Plate
(60/40 Sn/Pb
available)
<-30dB
A 350 400
B 325 375
√
_____
Package Specifi cation Data (MIL and Commercial)
TaNFilm® Precision
Flat Pack Networks
Specifi cation Size Schematic Resistance Range (Ω) Absolute Tolerance (%) Characteristic
MIL-PRF-83401/03
MIL-PRF-83401/15 14-Pin A, B
20 - 121K F, G, J K, M
100 - 100K B, D, F, G, J H, K, M
MIL-PRF-83401/10 16-Pin A, B 100 - 100K B, D, F, G, J H, K, M
MIL-PRF-83401 Qualifi cation Data
8900 Series Issue September 2009 Sheet 2 of 4
Make Possible
07.14
General Note
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronicsresistors.com
8900 Series
07.20
General Note
TT Electronics reserves the right to make changes in product specication without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronics.com/resistors
BI Technologies IRC Welwyn
TaNFilm® Precision
Flat Pack Networks
8900 Series
• 4222 South Staples Street • Corpus Christi Texas 78411 USA
© IRC Advanced Film Division
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
Environmental Data
Test per MIL-PRF-83401
MIL-PRF-83401 Limits (∆R%) TaNFilm® Test Data (∆R%)
M K H V Max Typical
Thermal Shock and Power Conditioning 0.7 0.7 0.5 0.25 0.1 0.02
Low Temperature Operation 0.5 0.25 0.1 0.1 0.1 0.01
Short Term Overload 0.5 0.25 0.1 0.1 0.05 0.01
Terminal Strength 0.25 0.25 0.25 0.1 0.1 0.01
Resistance to Solder Heat 0.25 0.25 0.1 0.2 0.1 0.02
Moisture Resistance 0.5 0.5 0.4 0.25 0.1 0.03
Shock 0.25 0.25 0.25 0.25 0.1 0.03
Vibration 0.25 0.25 0.25 0.1 0.1 0.03
Life 2.0 0.5 0.5 0.1 0.1 0.03
High Temperature Exposure 1.0 0.5 0.2 0.1 0.1 0.03
Low Temperature Storage 0.5 0.25 0.1 0.1 0.1 0.02
25°C Double Load 2.0 0.5 0.5 0.1 0.05 0.03
0.825" Max
L
0.250" ± 0.010
0.050" ± 0.005
0.300" ± 0.050
0.017" ± 0.002
0.075" Max
0.025" ±0.003
0.005" ± 0.001
0.030" max miniscus
typ
0.305" Max
included miniscus
Physical Data
# of
leads Dimension L
14 0.375" ± .010
16 0.390" ± .020
TaNFilm® Precision
Flat Pack Networks
8900 Series Issue September 2009 Sheet 3 of 4
Make Possible
07.14
General Note
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronicsresistors.com
TaNFilm® Precision
Flat Pack Networks
8900 Series
07.20
General Note
TT Electronics reserves the right to make changes in product specication without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronics.com/resistors
BI Technologies IRC Welwyn
TaNFilm® Precision
Flat Pack Networks
8900 Series
• 4222 South Staples Street • Corpus Christi Texas 78411 USA
© IRC Advanced Film Division
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
Commercial and MIL-Screened
(Non-QPL) Ordering Data
Prefi x
Specifi cation Sheet
03 = 14-pin Flat Pack = RZ030
10 = 16-pin Flat Pack = RZ100
15 = 14-pin HI REL Flat Pack = RZ150
Characteristic
M, K, H
Resistance
Standard 4-digit MIL resistance code
Example: 1001 = 1000Ω; 50R0=50Ω
Absolute Tolerance
J = ±5%; G = ±2%; F = ±1.0%; D = ±0.5%; B = ±0.1%
Schematic
A = Isolated; B = Bussed Schematic
Standard lead termination is gold plate.
Contact factory for optional 60/40 Sn/Pb hot solder dip finish.
MIL-PRF-83401 Ordering Data
M83401 03 K 1001 F A
Prefi x
Model
8987 = 14-pin Flat Pack, schematic B, gold terminations
8987SD = 14-pin Flat Pack, schematic B, 60/40 Sn/Pb terminations
8987HR = 14-pin HI-REL Flat Pack, schematic B, gold terminations
8989 = 14-pin Flat Pack, schematic A, gold terminations
8989SD = 14-pin Flat Pack, schematic A, 60/40 Sn/Pb terminations
8989HR = 14-pin HI-REL Flat Pack, schematic A, gold terminations
8998 = 16-pin Flat Pack, schematic B, gold terminations
8998SD = 16-pin Flat Pack, schematic B, 60/40 Sn/Pb terminations
8998HR = 16-pin HI-REL Flat Pack, schematic B, gold terminations
8999 = 16-pin Flat Pack, schematic A, gold terminations
8999SD = 16-pin Flat Pack, schematic A, 60/40 Sn/Pb terminations
8999HR = 16-pin HI-REL Flat Pack, schematic A, gold terminations
Absolute TCR
Commercial Screening
01 = ±100ppm/°C; 02 = ±50ppm/°C; 03 = ±25ppm/°C; 11 = ±15ppm/°C
MIL-PRF-83401 Group A Screening
04 = ±300ppm/°C Characteristic M; 05 = ±100ppm/°C Characteristic K
06 = ±50ppm/°C Characteristic H; 07 = ±25ppm/°C Characteristic H
Resistance
Standard 4-digit MIL resistance code
Example: 1001 = 1000Ω; 50R0=50Ω
Absolute Tolerance
J = ±5%; G = ±2%; F = ±1.0%; D = ±0.5%; B = ±0.1%
Optional Ratio Tolerance to R1
F = ±1.0%; D = ±0.5%; C = ±0.25%; B = ±0.1%; A = ±0.05%; Q = ±0.02%; T = ±0.01%
Notes
HI-REL models include a precap inspection and thermo-compression bonded leads.
TCR codes 01, 02, 03, and 11 are not available on HI-REL models.
Custom schematics and screening available. Contact factory for ordering information.
TaNFilm® Precision
Flat Pack Networks
8900 Series Issue September 2009 Sheet 3 of 4
FP - 8999 - 03 - 1001 - B F
Make Possible
07.14
General Note
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronicsresistors.com
TaNFilm® Precision
Flat Pack Networks